• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.494-498
• /
• 2005

In order to design the aspherical lens, the revisions and the steps of the mathematical method are influenced with a lot of variables. The accuracy of the aspherical lens can be changed by these variables. Besides, to design the aspherical lens, many mathematical functions should be used. To use these mathematical functions is protected by patent administration. Therefore it is very difficult for most of developed countries to use them. This fact has been interrupting not only the development of the technique of a design of the aspherical lens but also the development of the equipments of optics. Because approximate values are used in most of common programs which create the aspherical lens : basically these common programs have variations. Therefore these aspherical lens are not accurate. In the paper, we calculated accurate values by using the refractive index of lens. Based on these data, wee created self-operating design programs. Consequently, our lens is more accurate than the aspherical lens which is created by the common programs influenced with approximate values. The used programs belonging to AutoCAD is Visual LISP.

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.104-110
• /
• 2016

The aim of this study is to develop and suggest the handle for lockers according to the design process which are used for keeping of student's personal stuffs such as books, writing implements and gym uniform in elementary, middle and high school and university as well. This includes the design development for ILGUMTUR which is specialized for office furniture, but does not own the intellectual property right yet. The design concept based on the domestic locker market survey is recessed handle at low- to intermediate price and it's material should be plastic what is solid and light. The lock system should be constructed by molding process and the name plate can be exchanged every time the owner of locker changes. Contrary to the right angle of it's external appearance, the handle of the locker is designed to be softly round and the simplicity is pursued for an easy production. On the basis of this design concept the sketch has been drawn and upgraded in full by 3D-rendering. Then the mock-up has been completed by 3D printer and ILGUMTUR has obtained a patent for the locking system based on the rotation of 2 circles.

• Journal of the Korea Furniture Society
• /
• v.18 no.3
• /
• pp.177-187
• /
• 2007

Since the 1960s when paper began to use as a structural material in furniture, design, the way of using paper was dramatically changed. Before the 1960s, paper was used mostly in decorative purposes like paper $mach\acute{e}$. The development of consumer culture in the 1960s created a new trend for paper in design. Paper became a material for dresses and chairs. Also, the types of paper that adapted on furniture varies from cardboard, paper tubes, glassine paper, honeycomb, etc. The variation of the material results to make possible to create a new form. Moreover, paperboard was broadly used in current society in such area that mostly structural based as architecture. Paper gives great opportunity not only to consumers to buy furniture in inexpensive price also to manufacturers to produce furniture and to test market easily, Moreover, paper furniture is mostly fun. Therefore, the creation of paper furniture becomes diverse in terms of design concept. This study explored the characteristics of paper furniture responding to social backgrounds by decade. Relation between types of paper and the characteristics is one of main points in this research. This study covers furniture design from the 1960s to present and mostly focuses on seating furniture where paper used as structural material. Researching on patent records and contemporary periodicals gave me helpful information on details of design process and consumer culture.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.280-281
• /
• 2008

In pursuit of decreasing noise and vibration, the electromagnetic active control mount(ACM) is developed which is corresponding with the tendency of greater fuel efficiency, higher engine power and lower lightweight vehicle. In process of developing the ACM, making patent searches and benchmarking are performed first, and then robust mount design which is reflected on the users' demand through Design For Six Sigma(DFSS) is carried out. The manufactured prototype of ACM is tested in various environmental conditions for the purpose of ensuring the performance quantitatively.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.495-503
• /
• 2011

When a patent of an innovative (brand-name) small-molecule drug expires, generic copies of the innovative drug may be marketed if their therapeutic equivalence to the innovative drug has been shown. The small-molecule drugs are considered therapeutically equivalent and can be used interchangeably if two drugs are shown to be pharmaceutically equivalent with identical active substance and bioequivalent with comparable pharmacokinetics in a crossover clinical trial. However, the therapeutic equivalence paradigm cannot be applied to biosimilars since the active ingredients of biosimilars are huge molecules with complex and heterogeneous structures, and these molecules are difficult to replicate in every detail. The European Medicine Agency(EMEA) has introduced a regulatory biosimilar pathway which mandates clinical trials to show therapeutic equivalence. In this paper, we discuss statistical considerations in the design and analysis of biosimilar cancer clinical trials.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.100-105
• /
• 1994

In this paper, we discuss a method for design of an ambulance stretcher which call decrease blood pressure fluctuation caused by ambulance acceleration. Recently, a lot of stretchers which can isolate the vertical vibration to reduce body resonances (4-10 Hz) have been used during ambulance transport. However, we have found that blood pressure of a patient laying in the stretcher fluctuates when the ambulance accelerates or decelerates. Since the enforced change of the blood pressure may deteriorate the patent's condition, a stretcher to cancel head-to-foot acceleration and to decrease the blood pressure variation (BPV) is expected for safe transport. We propose a method to design a stretcher which is tilted according to an adequate angle to cancel head-to-foot acceleration by gravity when the ambulance accelerates or decelerates. A control method of the stretcher is constructed by means of simulation analysis using acceleration data measured during ambulance transport. It is confirmed that the active controlled stretcher proposed has good performance for the BPV reduction.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.3
• /
• pp.367-381
• /
• 2002

This study deals with the technological trends in the automobile recycling technologies. It first discusses the importance and current situation of automobile recycling. And then it discusses the technological trends in automobile recycling industry classifying the technologies into three groups: disassemblying, recycling, and design. It deals with recycling of major parts of automobiles and the design of automobile for recyclability. This study also contains a patent analysis of the technologies. Different patterns in the trend of patents among various conn-tries are discussed with the context of legal and industrial situation of each country And finally it discusses the forecasting for the future technological and legislative trends.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1483-1499
• /
• 2015

With the improvement of the quality of construction materials and the development of construction technologies, large-scale long-span steel frame buildings have been built recently. The P.E.B system using tapered members is being employed as an economically-efficient long-span structure owing to its advantage of being able to distribute stress appropriately depending on the size of sectional areas of members. However, in December 2005 and in February 2014, P.E.B buildings collapsed due to sudden loads such as snow loads and wind gusts. In this study, the design and construction of the P.E.B system in Korea were analyzed and its structural safety was evaluated using the finite element analysis program to suggest how to improve the P.E.B system in order to promote the efficient and rational application of the system.

• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.151-165
• /
• 2011

Recently building up of u-learning oriented teaching and learning system has been expanded rapidly, However domestic junior college's challenging for adapting it might be slower than other educational body's doing, and in that result it might be paid more or be taken longer time to improve their old system effectively. Now, it is very time for them to develop and implement u-learning oriented teaching and learning system quickly. This paper offers and draws the core factors to design ubiquitous teaching and learning model systematically through investigation of worldwide recent technology and R&D, patent, service and standardization tendency related with u-learnig modeling.