• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.77-81
• /
• 2009

This study was performed to evaluate applicability of patching materials for underwater dam concrete structure. Two kinds of patching materials was investigated. Laboratory experimentals were conducted by workability, compressive strength, bond strength, chloride ion penetration, abrasion resistance. Test results showed that the most performances are relatively good except chloride ion penetration.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.59-67
• /
• 2012

본 연구는 아스팔트 포장 파손을 복구하는 보수재료에 대한 연구이다. 현재 국내에서 사용되고 있는 네가지 종류 재료들에 대하여 실내 및 현장시험을 실시하였다. 실내 시험으로 마샬안정도시험, 간접인장시험, 수침잔류 안정도시험, 휠트랙킹 시험을 실시하였다. 또한 성능시험으로는 기존 아스팔트 콘크리트 혼합물과의 수평전단강도시험을 실시하였다. 현장시험은 아스팔트 포장 도로상에서 차량바퀴가 통과하는 지점에 패칭 슬래브를 제작하여 차량 통과에 따른 공용 결과를 관찰하였다. 실내시험 결과는 현재 적용되고 있는 설계 재료들의 기준은 수침잔류 안정도를 제외하고 만족하였다. Type C가 가장 높은 수평전단강도를 나타냈다. 그러나 시공후 10일 이후부터 소성변형과 탈리와 같은 파손이 발생하였다. 따라서 현재 사용되고 있는 상온보수 재료들을 현장에 적용할 경우에 우수한 성능을 기대할 수 없어서 조기파손을 방지할 수 있는 새로운 시험방법의 개발과 적용이 필요하다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.43-55
• /
• 2016

PURPOSES : This study aims to develop a repair material that can enhance pavement performance, inducing rapid traffic opening through early strength development and fast setting time by utilizing MgO-based patching materials for repairing road pavements. METHODS : To consider the applicability of MgO-based patching materials for repairing domestic road pavements, first, strength development and setting time of the materials were evaluated, based on MgO to $KH_2PO_4$ ratio, water to binder ratio, and addition ratio of retarder (Borax), by which the optimal mixture ratio of the developed material was obtained. To validate the performance of the developed material as a repair material, the strength(compressive strength and bonding strength) and durability (freezing, thawing, and chloride ion penetration resistance) was checked through testing, and its applicability was evaluated. RESULTS : The results showed that when an MgO-based patching material was used, the condensation time was reduced by 80%, and the compressive strength was enhanced by approximately 300%, as compared to existing cement-based repair materials. In addition, it was observed that the strength (compressive strength and bonding strength) and durability (freezing and thawing, and chloride ion penetration resistance) showed an excellent performance that satisfied the regulations. CONCLUSIONS : The results imply that an emergent repair/restoration could be covered by a rapid-hardening cement to meet the traffic limitation (i.e. the traffic restriction is only several hours for repair treatment). Furthermore, MgO-based patching materials can improve bonding strength and durability compared to existing repair materials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.617-620
• /
• 2008

구조물의 열화부위를 제거하고 단면수복재로 되메우는 단면수복공법의 합리적인 시공을 위해서는 외부로부터 침투되는 염화물이온에 대한 단면수복재 및 이를 시공한 철근콘크리트구조물의 염화물이온 침투예측의 선행이 필요하다. 따라서 본 연구에서는 단면수복재 시공이후의 구조물의 염해상태를 예측하고, 염화물이온의 침투 및 그에 의한 철근부식을 예측하기위해 단면수복재를 시공한 콘크리트의 염화물이온 확산계수를 정확히 파악하고자 한다. 본 연구에서는 실제 염화물이온 급속침투실험(Rapid Chloride Permeability Test)를 통한 단면수복재의 염화물이온 확산계수를 실험적으로 산정하고 단면수복재의 두께가 염화물이온 확산에 미치는 영향 또한 수치적으로 규명하였다. 실험에서 도출된 콘크리트 및 단면수복재의 염화물이온 확산계수를 일본토목학회에서 제시한 식 및 유한요소해석(Finite Element Method)를 이용하여 단면수복재로 보수시공한 구조물의 위치별 염화물이온농도를 산출하였다.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2070-2077
• /
• 2001

An experimental investigation of the effect of composite patching repair was conducted to characterize the fatigue crack growth behavior in thick A16061-T6 (6mm) panels with single bonded patch by fiber reinforced composite patch. Four patch lengths and no patch plate were examined. An analytical procedure, involving three-dimensional finite element method having three layers to model cracked aluminum plate, epoxy by adhesive and composite Patch, is calculated the stress intensity factors. From the calculated stress intensity factors, the fatigue crack growth rates are obtained. At the single patching type, different fatigue crack growth ratios through the palate thickness were investigated by using the experimental and analytical results. The results demonstrated that there was a definite variation in fatigue life depending on the size of composite patch. While crack reached the patch end, retardation of crack growth was also revealed in the bonded repair.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.486-489
• /
• 2004

In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.89-96
• /
• 2010

이산화탄소에 의해 열화된 콘크리트 구조물의 보수 후 잔존수명을 평가할 때 보수재의 효과를 고려하기 위해 본 연구에서는 탄산화에 의해 열화를 받은 콘크리트 부재의 보수 후 재열화과정을 Fick's 확산(diffusion) 제1법칙을 이용하여 모델링함으로써 단면복구재에 의해 보수된 콘크리트 부재의 독특한 상황을 고려한 합리적인 예측식을 제시하였다. 연구결과는 보수재의 이산화탄소 확산 프로파일과 기존 구체콘크리트의 탄산화된 부분의 이산화탄소 확산 프로파일을 효과적으로 모델링할 수 있음을 보여줬다. 제시된 평가모델식에 대한 검증예제를 통해 보수재의 이산화탄소 확산지연효과를 확인할 수 있었으며 보수된 콘크리트 구조물의 보수 후 잔존수명을 객관적이고 수치계산적인 방법으로 평가할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.292-298
• /
• 2001

An experimental investigation of the effect of composite patching repair was conducted to characterize the fatigue crack growth behavior in thick A16061-T6 (6mm) panels with single bonded patch by fiber reinforced composite patch. Four patch lengths and no patch plate were examined. An analytical procedure, involving three-dimensional finite element method having three layers to model cracked aluminum plate, epoxy by adhesive and composite patch, is calculated the stress intensity factors. From the calculated stress intensity factors, the fatigue crack growth rates are obtained. At the single patching type, different fatigue crack growth ratios through the plate thickness were investigated by using the experimental and analytical results. The results demonstrated that there was a definite variation in fatigue life depending on the size of composite patch. While crack reached the patch end, retardation of crack growth was also revealed in the bonded repair.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.87-100
• /
• 2012

The process of selecting a repair material is a typical one of multi-criteria decision-making (MCDM) problems. In this study Analytical Hierarch Process was applied to solve this MCDM problem. Many factors affecting a process to select an optimal repair material can be classified into quantitative and qualitative requirements and this study handled only quantitative items. Quantitative requirements in the optimal selection model for repair material were divided into two parts, namely, the required chemical performance and the required physical performance. The former is composed of alkali-resistance, chloride permeability and electrical resistivity. The latter is composed of compressive strength, tensile strength, adhesive strength, drying shrinkage, elasticity and thermal expansion. The result of the study shows that this method is the useful and rational engineering approach in the problem concerning the selection of one out of many candidate repair materials even if this study was limited to repair material only for chloride-deteriorated concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.217-218
• /
• 2010

본 연구에서는 탄산화에 의해 열화를 받은 콘크리트 부재의 보수 후 재열화과정을 Fick's 확산(diffusion) 제1법칙을 이용하여 모델링하였다. 여러 콘크리트 보수재 중 단면복구재에 의해 보수된 콘크리트 부재에 대한 이산화탄소에 재탄산화를 고려한 합리적인 예측식을 제시하였다. 연구결과는 보수재의 이산화탄소 확산 프로파일과 기존 구체콘크리트의 탄산화된 부분의 이산화탄소 확산 프로파일을 효과적으로 모델링할 수 있음을 보여줬다.