• 제목/요약/키워드: passivity controller

검색결과 47건 처리시간 0.034초

A stabilizing control technique for bilateral teleoperation system with time delay

  • Kim, H.W.;Suh, I.H.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.336-341
    • /
    • 2004
  • In this paper, a hybrid stabilization approach involving both passivity observer/passivity controller and wave variables is addressed to stabilize a teleoperation system with fixed time delay. To guarantee the stability of master or slave side, passivity observer/passivity controller are applied. But, passivity observer/passivity controller cannot deal with communication delay, and thus even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to fixed communication delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

  • PDF

시변 시간지연 하에서 안정성을 보장하는 양방향 원격제어기 : 시간영역 수동성 기법 (Bilateral Controller for Time-varying Communication Delay: Time Domain Passivity Approach)

  • 유지환
    • 제어로봇시스템학회논문지
    • /
    • 제13권11호
    • /
    • pp.1099-1105
    • /
    • 2007
  • In this paper, modified two-port time-domain passivity approach is proposed for stable bilateral control of teleoperators under time-varying communication delay. We separate input and output energy at each port of a bilateral controller, and propose a sufficient condition for satisfying the passivity of the bilateral controller including time-delay. Output energy at the master port should be less than the transmitted input energy from the slave port with time-delay, and output energy at the slave port should be less than the transmitted input energy from the master port with time-delay. For satisfying above two conditions, two passivity controllers are attached at each port of the bilateral controller. A packet reflector with wireless internet connection is used to introduce serious time-varying communication delay of teleoperators. Average amount of time-delay was about 190(msec) for round trip, and varying between 175(msec) and 275(msec). Moreover some data packet was lost during the communication due to UDP data communication. Even under the serious time-varying delay and packet loss communication condition, the proposed approach can achieve stable teleoperation in free motion and hard contact as well.

웨이브 변수의 가변 특성 임피던스를 이용한 시간지연을 갖는 양 방향 원격조작시스템의 안정화 제어 방법 (A Stabilizing Control technique for Bilateral Teleoperation System with Time delay using Adjustable Characteristic Impedance of wave Variable)

  • 김형욱;김종복;서일홍;이병주
    • 제어로봇시스템학회논문지
    • /
    • 제9권8호
    • /
    • pp.600-609
    • /
    • 2003
  • A hybrid stabilization approach involving both Passivity Observer/passivity Controller and wave variables is addressed to stabilize the teleoperation system with time delay. To guarantee the stability of master or slave side, Passivity Observer and Passivity Controller are applied. But Passivity Observer and Passivity Controller technique cannot deal with communication delay and even small communication delay cause the system to be unstable. To cope with this problem, wave variables are additionally employed to have robustness to arbitrary delays. To show the validity of our proposed approach, several computer simulation results are illustrated.

변형 가능한 작업환경에 대한 시간영역 수동제어 방법 (Time Domain Passivity Approach for Soft and Deformable Environments)

  • 유지환
    • 제어로봇시스템학회논문지
    • /
    • 제12권5호
    • /
    • pp.457-463
    • /
    • 2006
  • Recently proposed control scheme for a stable teleoperation, which was based on two-port time-domain passivity approach[21], has been successful for a contact with high stiffness environments. However, we found several conservatisms during the contact with deformable environments and unconstrained motion. The two-port time-domain passivity controller was excessively dissipating energy even though it was not necessary for some cases of an unconstrained motion and soft contact. The main reason of those conservatisms was on the fact that the two-port time-domain passivity controller was activated without considering the amount of energy dissipation at the master and slave manipulators. Especially, the exclusion of the slave manipulator from the two-port was the dominant reason of the conservatisms. In this paper, we consider the amount of energy dissipation at slave manipulator for designing the time-domain passivity observer and controller. The measured interaction force between slave manipulator and environment allow the time-domain passivity observer to include the amount of energy dissipation at the slave manipulator. Based on the modified passivity observer, reference energy following method[24] is applied to satisfy the passivity condition in real-time. The feasibility of the developed methods is proved with experiments. Improved performance is obtained for an interaction with deformable environments and an unconstrained motion.

시간영역 수동제어기의 미세떨림현상 제거 (Removing the Noisy Behavior of the Time Domain Passivity Controller)

  • 유지환
    • 제어로봇시스템학회논문지
    • /
    • 제12권4호
    • /
    • pp.380-388
    • /
    • 2006
  • A noisy behavior of the time domain passivity controller during the period of low velocity is analyzed. Main reasons of the noisy behavior are investigated through a simulation with a one-DOF (Degree of Freedom) haptic interface model. It is shown that the PO/PC is ineffective in dissipating the produced energy when the sign of the velocity, which is numerically calculated from the measured position, is suddenly changed, and when this velocity is zero. These cases happen during the period of low velocity due to the limited resolution of the position sensor. New methods, ignoring the produced energy from the velocity sign change, and holding the control force while the velocity is zero, are proposed for removing the noisy behavior. The feasibility of the developed methods is proved with both a simulation and a real experiment.

시스템의 수동성과 신경망을 이용한 전력 시스템의 과도 안정도 제어 (Transient Stability Control of Power System using Passivity and Neural Network)

  • 이정원;이용익;심덕선
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권8호
    • /
    • pp.1004-1013
    • /
    • 1999
  • This paper considers the transient stability problem of power system. The power system model is given as interconnected system consisting of many machines which are described by swing equations. We design a transient stability controller using passivity and neural network. The structure of the neural network controller is derived using a filtered error/passivity approach. In general, a neural network cannot be guaranteed to be passive, but the weight tuning algorithm given here do guarantee desirable passivity properties of the neural network and hence of the closed-loop error system. Moreover proposed controller shows good robustness by simulation for uncertainties in parameters, which can not be shown in the speed gradient method proposed by Fradkov[3,7].

  • PDF

유압 모터 위치 제어를 위한 High gain observer에 기초한 Passivity based Controller (High Gain observer based Passivity based Controller for Position Control of Hydraulic actuator)

  • 김원희;최인덕;강동규;신동훈;원대희;정정주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1652_1653
    • /
    • 2009
  • 본 논문에서는 passivity based controller에 high gain observer를 접목시킨 유압 모터의 위치 제어기를 제시 한다. 본 논문에서는 5차 비선형 동역학 모델을 사용 하였다. Passivity based controller는 유압 모터의 높은 위치 추정능력을 구현하지만 그것을 위해서는 유압 모터의 상태 및 부하의 정보를 알아야 한다. 상태 및 부하의 정보를 추정 하기 위하여 high gain observer를 제안하였다. High gain observer을 사용함으로서 유압 모터와 부하의 동역학의 비선형성을 줄여 상태 및 부하를 효과적으로 추정 하였다. 유압 모터의 위치 제어 성능 및 부하의 관측 능력 평가를 위하여 Matlab/Simulink를 이용하여 모의 실험을 구현 하였다.

  • PDF

시간영역 수동성 기법을 이용하여 시변 시간지연 하에서 안정성을 보장하는 양방향 원격제어기: 리셋 방법 (Bilateral Control with Time Domain Passivity Approach under Time-varying Communication Delay: Resetting Scheme)

  • 유지환
    • 제어로봇시스템학회논문지
    • /
    • 제14권11호
    • /
    • pp.1124-1129
    • /
    • 2008
  • Recently, two-port time-domain passivity approach was modified for time-varying communication delay. The newly proposed approach could achieve stable teleoperation even under the serious time-varying delay and packet loss communication condition. However, after some operation hour, the accumulated energy difference between the input energy from one port and the output energy at the other port caused unstable behavior until the passivity controller is activated. Resetting scheme is introduced for solving this problem, and stable bilateral teleoperation can be guaranteed without worrying about the accumulated energy difference.

Passivity-Based Control System of Permanent Magnet Synchronous Motors Based on Quasi-Z Source Matrix Converter

  • Cheng, Qiming;Wei, Lin
    • Journal of Power Electronics
    • /
    • 제19권6호
    • /
    • pp.1527-1535
    • /
    • 2019
  • Because of the shortcomings of the PID controllers and traditional drive systems of permanent magnet synchronous motors (PMSMs), a PMSM passivity-based control (PBC) drive system based on a quasi-Z source matrix converter (QZMC) is proposed in this paper. The traditional matrix converter is a buck converter with a maximum voltage transmission ratio of only 0.866, which limits the performance of the driven motor. Therefore, in this paper a quasi-Z source circuit is added to the input side of the two-stage matrix converter (TSMC) and its working principle has also been verified. In addition, the controller of the speed loop and current loop in the conventional vector control of a PMSM is a PID controller. The PID controller has the problem since its parameters are difficult to adjust and its anti-interference capability is limited. As a result, a port controlled dissipative Hamiltonian model (PCHD) of a PMSM is established. Thereafter a passivity-based controller based on the interconnection and damping assignment (IDA) of a QZMC-PMSM is designed, and the stability of the equilibrium point is theoretically verified. Simulation and experimental results show that the designed PBC control system of a PMSM based on a QZMC can make the PMSM run stably at the rated speed. In addition, the system has strong robustness, as well as good dynamic and static performances.

Time Domain Passivity Approach for Soft and Deformable Environments

  • Ryu, J.H.;Kim, J.H.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.107-112
    • /
    • 2005
  • Recently proposed stable teleoperation control scheme, base on time domain passivity, is modified to remove several conservatisms. During unconstrained motion and contacting with soft and deformable environments, the two-port time domain passivity approach [21] was excessively dissipating energy even though it was stable without any energy dissipation. The main reason of this conservatism is on the fact that the time domain passivity controller does not include the external energy dissipation elements at the slave manipulator. The measured interaction force between slave and environment allow the time domain passivity observer to include the amount of energy dissipation of the slave manipulator to the monitored energy. With the modified passivity observer, reference energy following idea [24] is applied to satisfy the passivity condition. The feasibility of the developed methods is proved with experiments. Improved performance is obtained in unconstrained motion and contacting with a soft environment.

  • PDF