• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.1-19
• /
• 2014

Attaching a piezoelectric transducer to a vibrating structure, and shunting it with an electric circuit, gives rise to different passive, semi-passive, and semi-active control techniques. This paper attempts to review the research related to structural vibration control, via passive, semi-passive, and semi-active control methods. First, the existing electromechanical modeling is reviewed, along with the modeling methods. These range from lumped parameters, to distributed parameters modeling of piezostructural systems shunted by electrical networks. Vibration control laws are then discussed, covering passive, semi-passive, and semi-active control techniques, which are classified according to whether external power is supplied to the piezoelectric transducers, or not. Emphasis is placed on recent articles covering semi-passive and semi-active control techniques, based upon switched shunt circuits. This review provides the necessary background material for researchers interested in the growing field of vibration damping and control, via shunted piezostructural systems.

• Journal of the Korea Society for Simulation
• /
• v.13 no.4
• /
• pp.1-16
• /
• 2004

The modelling and simulation of the activation process for the heart system is meaningful to understand special excitatory and conductive system in the heart and to study cardiac functions because the heart activation conducts through this system. This thesis proposes two dimensional cellular automaton(CA) model for the activation process of the myocardium and conducted simulation by means of discrete time and discrete event algorithm. In the model, cells are classified into anatomically similar characteristic parts of the heart and each of cells has a set of cells with preassigned properties. Each cell in this model has state variables to represent the state of the cell and has some state transition rules to change values of state variables executed by state transition function. The state transition rule is simple as follows. First, the myocardium cell at rest stay in passive state. Second, if any one of neighborhood cell in the myocardium cell is active state then the state is change from passive to active state. Third, if cell's state is an active then automatically go to the refractory state after activation phase. Four, if cell's state is refractory then automatically go to the passive state after refractory phase. These state transition is processed repeatedly in all cells through the termination of simulation.

• Journal of the Korean Society of School Health
• /
• v.15 no.1
• /
• pp.93-105
• /
• 2002

This study was aimed at identifying on the state and knowledge toward smoking and passive smoking in middle school students. The data were collected from 6th. to 18th. August, 2001. Subject were 125 middle school students who were participated in the Smoking Cessation Program of S Health Agency in Busan. The collected data were analyzed by SPSS program for frequency, percent, mean, and chi-square test. The smoking related state and attitude of subjects were as follows; the nurmber of the smoking students are 10(8.0 %) at present, 19(15.2 %) at past experience, 53(42.4 %) having at present smoking friends, 73(58.4 %) having at present smoking family. Also the smoking starting time of present or past smoking experience was the middle school; 12(9.6 %) and elementary school; 11(8.8 %). They started because of the peer group members; 12(9.6 %), curiosity; 8(6.4 %), and looking good; 7(5.6 %). The passive smoking related state and attitude of subjects were as follows; the number of the passive smoking aware rates are very well level; 71(56.8 %), well level; 54(43.2 %). The exposed experience to passive smoking was always; 38(30.4 %), sometimes; 86(68.8 %), not experience; 1(0.8 5). The place of exposure to passive smoking was game rooms; 67(53.6 %), house; 30(24.0 %), fast food place or cafeteria; 10(8.0 %), and street or in a vehicle ; 3(2.4 %). The main smoker to passive smoking exposure was unknown person; 61(48.8 %), grand parents or parents; 43(34.4 %), brothers or friends; 8(6.4 %), teachers; 4(3.2 %). The chief complant of passive smoking exposure was dyspnea; 36(28.8 %), coughing; 34(27.2 5), dizziness; 21(16.8 %), no symptom; 18(14.4 %). The mostly affected smoker to passive smoking exposure was parents; 52(41.6 %), brothers or friends; 48(38.4 %). The health affected perception to passive smoking exposure was very affected; 109(87.2 %), not affected; 3(2.4 %). In conclusion, it can be well recognized that considerable number of middle school students is exposed to the passive smoking in their homes and by unknown persons, but, their knowledge and attitude toward the exposure to passive smoking is not effective. Therefore, it is hoped that regular smoking education program at school and restriction campaign in home and the public place is necessary.

• Communications of the Korean Mathematical Society
• /
• v.14 no.2
• /
• pp.405-423
• /
• 1999

We consider a statistical multiplexer model with finite buffer capacity and finite number of independent identical 3-state bursty voice sources. The burstiness of the sources is modeled by describing both two different active periods (at the rate of one packet perslot) and the passive periods during which no packets are generated. Assuming a mixture of two geometric distributions for active period and a geometric distribution for passive period and geometric distribution for passive period, we derive the recursive algorithm for the probability mass function of the buffer contents (in packets). We also obtain loss probability and the distribution of packet delay. Numerical results show that the system performance deteriorates considerably as the variance of the active period increases. Also, we see that the loss probability of 2-state Markov models is less than that of 3-state Markov models.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1991-2000
• /
• 2017

This paper presents a compensative microstepping based position control with passive nonlinear adaptive observer for permanent magnet stepper motor. Due to the resistance uncertainties, a position error exists in the steady-state, and a ripple of position error appears during operation. The compensative microstepping is proposed to remedy this problem. The nonlinear controller guarantees the desired currents. The passive nonlinear adaptive observer is designed to estimate the phase resistances and the velocity. The closed-loop stability is proven using input to state stability. Simulation results show that the position error in the steady-state is removed by the proposed method if the persistent excitation conditions are satisfied. Furthermore, the position ripple is reduced, and the Lissajou curve of the phase currents is a circle.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.125-130
• /
• 2011

This study was performed to improve the corrosion resistance and the stability of passive film on copper tube by potentiostatic polarization method in synthetic tap water. Formation of passive film was carried out by anodic potentiostatic polarization at various passivation potentials and passivation times in 0.1 M NaOH solution. Stability of passive film and corrosion resistance was evaluated by self-activation time, ${\tau}_0$ from passive state to active state on open-circuit state in 0.1 M NaOH solution. Addition of polyphosphate in NaOH solution prolonged the self-activation time and improved the corrosion resistance, and the addition of 5 ppm polyphosphate was most effective. It was also observed that better corrosion resistance was obtained by potentiostatic polarization at 1.0 V (vs. SCE) than at any other passivation potentials. Passivated copper tube showed perfect corrosion resistance for the immersion test in synthetic tap water showing that the anodic potentiostatic polarization treatment in 0.1 M NaOH with 5 ppm polyphosphate solution would be effective in improving the corrosion resistance and preventing the blue water problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.351-354
• /
• 1996

A new target adaptive guidance (TAG) algorithm is proposed to engage the aim point formed by adding a bias to the information from an infrared (IR) seeker for improving passive homing guidance effectiveness. The TAG algorithm utilizes an observability enhancing mid-course guidance algorithm to obtain convergent estimates of state variables involved particularly in range channel otherwise unavailable from passive sensors. Simulation results indicate that the TAG algorithm provides improved terminal effectiveness without computational complexities.

• Geomechanics and Engineering
• /
• v.7 no.3
• /
• pp.263-277
• /
• 2014

In the conventional design of retaining structures in a seismic zone, seismic inertia forces are commonly assumed to act upwards and towards the wall facing to cause a maximum active thrust or act upwards and towards the backfill to cause a minimum passive resistance. However, under certain circumstances this design approach might underestimate the dynamic active thrust or overestimate the dynamic passive resistance acting on a rigid retaining structure. In this study, a new analytical method for dynamic active and passive forces in c-${\phi}$ soils with an infinite slope was proposed based on the Rankine earth pressure theory and the Mohr-Coulomb yield criterion, to investigate the influence of seismic inertia force directions on the total active and passive forces. Four combinations of seismic acceleration with both vertical (upwards or downwards) and horizontal (towards the wall or backfill) directions, were considered. A series of dimensionless dynamic active and passive force charts were developed to evaluate the key influence factors, such as backfill inclination ${\beta}$, dimensionless cohesion $c/{\gamma}H$, friction angle ${\phi}$, horizontal and vertical seismic coefficients, $k _h$ and $k_v$. A comparative study shows that a combination of downward and towards-the-wall seismic inertia forces causes a maximum active thrust while a combination of upward and towards-the-wall seismic inertia forces causes a minimum passive resistance. This finding is recommended for use in the design of retaining structures in a seismic zone.

• Environmental Analysis Health and Toxicology
• /
• v.26
• /
• pp.4.1-4.6
• /
• 2011

Objectives: This study was carried out to determine whether or not pine needles can be used as passive samplers of atmospheric polycyclic aromatic hydrocarbons (PAHs) using the correlation between accumulated PAH concentrations in air (Ca, ng/$m^3$) and those deposited on pine needles (Cp, ng/g dry). Methods: PAHs in ambient air was collected using low volume PUF sampler and pine needles was gathered at same place for 7 months. Results: A good correlation ($R^2$=0.8582, p<0.05) was found between Ca and Cp for PAHs with a higher gaseous state in air (AcPy, Acp, Flu, Phen, Ant, Flt, Pyr, BaA and Chry), but there was a poorer correlation ($R^2$=0.1491, p=0.5123) for the PAHs with a lower gaseous state (BbF, BkF, BaP, DahA, BghiP and Ind123). A positive correlation ($R^2$=0.8542) was revealed between the logarithm of the octanol-air partitioning coefficient ($logK_{oa}$) and Cp/Ca for the PAHs with a higher gaseous state in air, but there was a negative correlation ($R^2$=0.8131) for the PAHs with a lower gaseous state. The Ca-Cp model could not be used to estimate PAHs concentrations in air using deposited PAHs concentrations on pine needles, but the logKoa-Cp/Ca model could be used. Conclusions: It was found that pine needles can be used as passive samplers of atmospheric PAHs.