• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.1005-1028
• /
• 2016

Two novel semi-active control methods for a seismically excited nonlinear benchmark building equipped with magnetorheological dampers are presented and evaluated in this paper. While a primary controller is designed to estimate the optimal control force of a magnetorheological (MR) damper, the required voltage input for the damper to produce such desired control force is achieved using two different methods. The first technique uses an optimal compact Takagi-Sugeno-Kang (TSK) fuzzy inverse model of MR damper to predict the required voltage to actuate the MR dampers (TSKFInv). The other voltage regulator introduced here works based on the maximum and minimum capacities of MR damper at each time-step (MaxMin). Both semi-active algorithms developed here, use acceleration feedback only. The results demonstrate that both TSKFInv and MaxMin algorithms are quite effective in seismic response reduction for wide range of motions from moderate to severe seismic events, compared with the passive systems and performs better than original and Modified clipped optimal controller systems, known as COC and MCOC.

• Journal of Mechanical Science and Technology
• /
• v.14 no.8
• /
• pp.807-815
• /
• 2000

In this paper, modified discrete time preview control algorithms for active and semi-active suspension systems are derived based on a simple mathematical 4 DOF half-car model. The discrete time preview control laws for ride comfort are employed in the simulation. The algorithms for MIMO system contain control strategies reacting against body forces that occur at cornering, accelerating, braking, or under payload, in addition to road disturbances. Matlab simulation results for the discrete time case are compared with those for the continuous time case and the appropriateness of the discrete time algorithms are verified by the of simulation results. Passive, active, and semi-active system responses to a sinusoidal input and an asphalt road input are analysed and evaluated. The simulation results show the extent of performance degradation due to numerical errors related to the length of the sampling time and time delay.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.888-891
• /
• 1991

In this paper, we have shown a new approach of neural networks for mobile robot motion control under an indoor refracted environment. The vehicle has two powered wheels and four passive casters which support a free motion. And it also uses sonar sensors, infrared sensors, Internal odometer, and contact sensors. Two experiments were conducted to demonstrate our objectives. The first one is that the vehicle executes a reflexive motor control to maintain a constant distance to the boundary. The second one is that as well as the boundary following, the vehicle makes a block obstacle avoidance during its path. Without prior knowledge of external environment. we have accomplished the tasks by employing a simple, reactive stimulus-response neural network scheme associating sensor data with the vehicle's action.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.22-27
• /
• 2009

Bilateral teleoperation systems, connected to computer networks such as Internet have to deal with the time delay depending on factors such as congestion, bandwidth or distance. And the entire system is easy to become unstable due to irregular time delay. Passivity concept has been using as a framework to solve the stability problem in bilateral control of teleoperation. In this paper, we present a suitable time varying gain inserted in the transmission path that can recover passivity provided a bound on the rate of change of the known delay. Simulation results are presented showing the performance of the resulting control architecture.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.419-434
• /
• 2014

In this paper, the electromagnetic damper (EMD), which is composed of a permanent-magnet rotary DC motor, a ball screw and a nut, is considered to be analyzed as a semi-active damper. The main objective pursued in the paper is to study the two degrees of freedom (DOF) model of the semi-active electromagnetic suspension system (SAEMSS) performance and energy regeneration controlled by on-off and continuous damping control strategies. The nonlinear equations of the SAEMSS must therefore be extracted. The effects of the EMD characteristics on ride comfort, handling performance and road holding for the passive electromagnetic suspension system (PEMSS) are first analyzed and damping control strategies effects on the SAEMSS performance and energy regeneration are investigated next. The results obtained from the simulation show that the SAEMSS provides better performance and more energy regeneration than the PEMSS. Moreover, the results reveal that the on-off hybrid control strategy leads to better performance in comparison with the continuous skyhook control strategy, however, the energy regeneration of the continuous skyhook control strategy is more than that of the on-off hybrid control strategy (except for on-off skyhook control strategy).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.871-875
• /
• 2003

To detect and avoid obstacles is one of the important tasks of mobile navigation. In a real environment, when a mobile robot encounters dynamic obstacles, it is required to simultaneously detect and avoid obstacles for its body safely. In previous vision system, mobile robot has used it as either a passive sensor or an active sensor. This paper proposes a new obstacle detection algorithm that uses a stereo camera as both a passive sensor and an active sensor. Our system estimates the distances from obstacles by both passive-correspondence and active-correspondence using laser slit. The system operates in three steps. First, a far-off obstacle is detected by the disparity from stereo correspondence. Next, a close obstacle is acquired from laser slit beam projected in the same stereo image. Finally, we implement obstacle avoidance algorithm, adopting the modified Dynamic Window Approach (DWA), by using the acquired the obstacle's distance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.59.3-59
• /
• 2002

$\textbullet$ Contents 1: Preliminaries on passivity and feedback passivity $\textbullet$ Contents 2: Assumptions in the paper $\textbullet$ Contents 3: Adaptive output feedback controllers $\textbullet$ Contents 4: Adaptive disturbance attenuation $\textbullet$ Contents 5: Adaptive passification $\textbullet$ Contents 6: An illustrative numerical example

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.301-308
• /
• 2018

This paper presents an optimal design method of a hybrid structural control system considering multi-hazard. Unlike a typical structural control system in which one system is designed for one specific type of hazard, a simultaneous optimal design method for both active and passive control systems is proposed for the mitigation of seismic and wind induced vibration responses of structures. As a numerical example, an optimal design problem is illustrated for a hybrid mass damper(HMD) and 30 viscous dampers which are installed on a 30 story building structure. In order to solve the optimization problem, a self-adaptive Harmony Search(HS) algorithm is adopted. Harmony Search algorithm is one of the meta-heuristic evolutionary methods for the global optimization, which mimics the human player's tuning process of musical instruments. A self-adaptive, dynamic parameter adjustment algorithm is also utilized for the purpose of broad search and fast convergence. The optimization results shows that the performance and effectiveness of the proposed system is superior with respect to a reference hybrid system in which the active and passive systems are independently optimized.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.565-577
• /
• 2019

One of the most effective countermeasures for mitigating cable vibration is to install mechanical dampers near the anchorage of the cable. Most of the dampers used in the field are so-called passive dampers where their parameters cannot be changed once designed. The parameters of passive dampers are usually determined based on the optimal damper force obtained from the universal design curve for linear dampers, which will provide a maximum additional damping for the cable. As the optimal damper force is chosen based on a predetermined principal vibration mode, passive dampers will be most effective if cable undergoes single-mode vibration where the vibration mode is the same as the principal mode used in the design. However, in the actual engineering practice, multi-mode vibrations are often observed for cables. Therefore, it is desirable to have dampers that can suppress different modes of cable vibrations simultaneously. In this paper, MR dampers are proposed for controlling multi-mode cable vibrations, because of its ability to change parameters and its adaptability of active control without inquiring large power resources. Although the highly nonlinear feature of the MR material leads to a relatively complex representation of its mathematical model, effective control strategies can still be derived for suppressing multi-mode cable vibrations based on nonlinear modelling, as proposed in this paper. Firstly, the nonlinear Bouc-wen model is employed to accurately portray the salient characteristics of the MR damper. Then, the desired optimal damper force is determined from the universal design curve of friction dampers. Finally, the input voltage (current) of MR damper corresponding to the desired optimal damper force is calculated from the nonlinear Bouc-wen model of the damper using a piecewise linear interpolation scheme. Numerical simulations are carried out to validate the effectiveness of the proposed control algorithm for mitigating multi-mode cable vibrations induced by different external excitations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.346-352
• /
• 2010

This paper presents an intuitive interface scheme for controlling a hydraulic backhoe, which is a piece of excavating equipment consisting of a digging bucket on the end of a two-part articulated arm, and typically mounted and rotated on the back of a tractor or front loader. The passive levers/joysticks for actuator operations of a hydraulic backhoe are replaced into electric joysticks with a robotic controller, which will generate the end-effecter command trajectories of the backhoe through joystick rate control in cylindrical coordinate. The developed backhoe with the hydraulic control system showed the maxim position error of 3 cm with intuitive coordinate operations, which would be helpful for conveniently performing various excavating tasks with natural and effective ways.