• Journal of Korean Society of Transportation
• /
• v.7 no.2
• /
• pp.5-15
• /
• 1989

The Provision of a Passing lane is strongly recommended When adeguate Passing Sight distance cannot be acguired at a Section of two-lane highway. Passing lanes are usually installed at two-lane highways along the shoulder area to minimize the impact of slow-moving heavy vehicles. The design concepts and specific dimension associated with the Passing lane construction are investigated in This research. In addition a case study was made using the field study data. Currently the level of service at the case study area was analyzed to be "F" based on 1985 Highway Capacity Manual procedure. With the installation of passing lanes, the level of service was improved into "C". A computer Simulation program developed by Australian Road Research Boand was utilized to analyze the effect of passing lanes.

• Journal of Korean Society of Transportation
• /
• v.11 no.3
• /
• pp.67-82
• /
• 1993

The effects of passing lanes on traffic flow on rural two-lane highways have been investigated in this research. Field study results were compared with the computer simulation model, TRARR, TRARR model appears to be in good agreement with field study results except that average speed and distribution of platoon sizes showed a small amount of discrepancy, which is believed to be caused by too large a headway definition of 6 second for a vehicle platoon. Using the TRARR model, 4 situations including the existing condition, installation of passing lanes, improvement of design speed, and expansion to a four lane highway were evaluated. Traffic volume levels of 500,1000, and 1500 vph and truck composition of 20 and 40% were also considered making a total of 24 computer runs. It is concluded in this research that the installation of passing lanes is the most effective method to improve traffic operation on two-lane high ways except the alternative of four lane highway expansion.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.141-151
• /
• 1998

Provision of Passing Sight Distance (PSD) is an important component in two-lane highway design and has a critical impact on capacity of highway and safety of drivers. Many models have been developed to estimate PSD reasonably. However, each of them has a number of shortcomings for reflecting the real traffic conditions. This paper introduces a revised model that reflects the characteristics of the passing maneuver. The changes in passing sight distances under different assumptions about acceleration and vehicle length, which are related to vehicle types, are presented. The results obtained by the revised model are compared with those obtained from the existing models. There is an important link between geometric design decisions which determine the available sight distance and the quality of service which the road provides. In this paper, we examine one aspect of this relationship. That is to determine whether the passing sight distance is provided by improving horizontal alignment for a specific roadway section or passing may be restricted to save the road construction cost. To do so, a simple method for estimating traffic delay in no-passing is introduced.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.131-138
• /
• 2012

PURPOSES : Two-lane highways have one lane in each direction, and lane changing and passing maneuvers take place in the opposing lane depending on the availability of passing sight distance. 2001 Korea Highway Capacity Manual (KHCM) is classified into two classes of two-lane highways (Type I, II), and average travel speed and time-delayed rate are used as measures of effectiveness (MOEs). However, since existing two-lane highways have both uninterrupted and interrupted traffic flow-system elements, a variety of free-flow speeds exhibits in two-lane highways. In addition, it is necessary to check if the linear-relationship between volumes and time-delayed rate is appropriate. Then, this study is to reestablish the relationship between average travel speed, time-delayed rate, and flow. METHODS : TWOPAS model was selected to conduct this study, and the free-flow speeds of passenger cars and the percentage of following vehicles observed in two-lane highways were applied to the model as the input. The revised relationships were developed from the computer simulation. RESULTS : In the revised average travel speed vs. flow relationship, the free-flow speed of 90km/h and 70km/h were added. It shows that the relationship between time delayed-rate and flow appeared to be appropriate with the log-function form and that there was no difference in time-delayed rate between the free flow speeds. In addition to revise the relationships, the speed prediction model and the time-delayed rate prediction model were also developed. CONCLUSIONS : The revised relationships between average travel speed, time-delayed rate, and flow would be useful in estimating the Level of Service(LOS) of a two-lane highway.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2010

This study started from the problem recognition of climbing lane installed in Korea roads. Because design standards of climbing lane installed don't match traffic pattern of korean drivers, coefficient of utilization of climbing lane is low and merging section between climbing lane and main lane has traffic accident possibilities. For this, brand-new design standards developed from the present lane design criterion, taper lenghs, and traffic signs, then field adoption test was carried out to prove the effectiveness. As a result, coefficient of utilization of climbing lane and average traffic velocity in climbing section are improved and the economic analysis also shows that brand-new standards has high feasibility for low cost. In case of broad application to not only expressway but national and local road based on the study, it could be a significant contribution to traffic flow improvement.

• Journal of Korean Society of Transportation
• /
• v.11 no.1
• /
• pp.23-36
• /
• 1993

The two-lane, two-way highway simulation program(TWOPAS) is evaluated for Korean Highway Capacity Manual Study. TWOPAS program input variables, especially related vehicle performance, traffic flow relationship, car-following model and passing logic are examined and modified through the analysis results of our two-lane, two-way highway traffic characteristics. Simulation outputs with and without modification are compared with the field data. The results show that improved TWOPAS program(TWOPAS KI) is well suitable for simulating our two-lane, two-way highway condition.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.187-192
• /
• 2017

Autonomous driving vehicle research demands complex road and lane understanding such as lane departure warning, adaptive cruise control, lane keeping and centering, lane change and turn assist, and driving under complex road conditions. A fast and robust road lane detection subsystem is a basic but important building block for this type of research. In this paper, we propose a method that performs road lane detection from black box input. The proposed system applies Random Sample Consensus to find the best model of road lanes passing through divided regions of the input image under HSV color model. HSV color model is chosen since it explicitly separates chromaticity and luminosity and the narrower hue distribution greatly assists in later segmentation of the frames by limiting color saturation. The implemented method was successful in lane detection on real world on-board testing, exhibiting 86.21% accuracy with 4.3% standard deviation in real time.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.123-132
• /
• 2011

The purpose of this study is to calculate and propose rational multi-lane loading factors for bridge design considering the probability of simultaneous truck passing in adjacent lanes and real truck weights. The probability of simultaneous truck passing is calculated by analyzing video image taken at various locations in highways and national roads. Weigh-In-Motion system data at two locations are used, which is combined with the probability of multiple presence to calculate the multi-lane loading factors for typical 2 lane and 5 lane bridges. Statistical properties of multi-lane loading factors are also calculated assuming that locations for video images and WIM data represent the overall traffic condition in the country. Results are compared with various design codes in the world and they show that the values are between the current Korea Bridge Design Code and AASHTO LRFD specification or Eurocode and are similar to Canadian Code.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.11-24
• /
• 2016

OBJECTIVES : This study aims to review a plan to reduce the shoulder width of a deformed round-trip two-lane highway with low traffic volume. METHODS : Installation of a passing lane on a round-trip two-lane (one-way one-lane) highway, and reduction of a shoulder for a round-trip four-lane highway. RESULTS : It is necessary to establish a design criterion for various highways, because the plan to reduce the lane or shoulder width of a highway with low traffic volume was analyzed to have an economic efficiency of 6.8~7.0%. CONCLUSIONS : It is necessary to seek for a plan to establish a national trunk net early by efficiently using the limited financial resources to cope with the traffic demand elastically.