• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5430-5437
• /
• 2011

The objective of this study is to investigate the cooling performances of the electrical air-conditioning system using electric driven scroll compressor for zero emission passenger vehicles. This air conditioner with air source was used R-134a as a refrigerant and installed in a real zero emission passenger vehicle for tests under various driving conditions. The cooling performance of the electrical air conditioner was affected by driving velocities and conditions of the tested vehicle. The condensing rate of the condenser during driving is better than that of the idle condition. The average cool down temperature in the cabin room decreased on average $5.2^{\circ}C$ with the increase of the outdoor temperature from $20.0^{\circ}C$ to $30.0^{\circ}C$. In addition, the cooling performances were sufficient for cooling loads of the tested passenger car under tested conditions.

• IE interfaces
• /
• v.11 no.3
• /
• pp.143-153
• /
• 1998

Warning control is one of the most important components in driver's cabin for achieving safe driving. The purpose of this study is to suggest ergonomically optimal location and type of passenger car's warning control. An experiment was conducted using driving simulator, in which nine locations and two types of warning controls -push button, rocker switch- were employed as experimental variables, and response time for warning signal and preference for locations and types of warning controls were measured as dependent variables. The results showed that response time for warning signal was the shortest when warning control was located at the middle left corner of the center fascia, and was the second at the middle center of the center fascia. Preference for warning signal was the highest at the middle left comer of the center fascia, and was the second between the steering wheel column and the center fascia. Although push button was not preferred to rocker switch, response time was shorter for push button than for rocker switch. It was suggested from these results that warning control with the type of push button should he located at among the middle left corner of the center fascia, the middle center of the center fascia, and between the steering wheel column and the center fascia.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2009

The aim of this study is to analyse the sensitivity of fire simulation parameters including grid size and solid angle number which affect the performance of subway cabin fire simulation by FDS 4.07 version. The results of sensitivity analysis shows average of $10{\sim}20%$ differences in plume temperature, upper layer temperature, and layer height depending on the change of grid size. The study also shows that simulation with 0.05m grid size produces better resolution than that with coarse one which is 0.1m.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.492-497
• /
• 2021

Smart Security is the global initiative of Airports Council International in collaboration with airports, airlines and governmental agencies. Its main objective is to create a step change in passenger and cabin baggage screening, escalating security costs and constantly evolving threats. Incheon International Airport should adopt and deploy smart security systems not only to strengthen aviation security but also increase passenger's experiences and operational efficiency by way of seamless security screening that it will lead to establish the best security environment to prevent terrorism and acts of unlawful interference.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.3
• /
• pp.7-16
• /
• 2020

Purpose: As communicable disease, COVID-19, pandemic strikes over the world, it is critically bewared that air travel possibly be a major pass way to deliver the infectious disease virus. Especially the airplane could be an unique environment to cultivate the virus spreaders. In order to keep the continuous safe airway as well as the industry, related international associations and organizations have been published the guidelines for the prevention and control the infectious disease through the all aspects of aviation. By reviewing the guidelines, focusing on the in-flight infection prevention and control, this study would not only inform a summary of the international guidelines but also provide an essential and general consideration for related research or guideline study. Methods: Guidelines of 5 major countries are reviewed, which has been seriously influenced by COVID-19 : U.S., Canada, E.U., Australia and China. The items of the guidelines are re-categorized as its similarity and structure by applicable cases. Results: The result of this study shows that each guideline seems to share a major structure and issue such as identifying sick traveler, sick passenger care, and cleaning even though that of China has a different since it used to consider the flight conditions based on 3 levels of infection risk. For sick passenger care, the guidelines includes crew safety, service level, sick passenger isolation, and cleaning. Implications: A published guideline as a public manual could be to prevent and control the in-flight infection efficiently and promptly. It also could provide a confidence of knowledge and educate for all users to prepare the in-flight emergency as well.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.288-294
• /
• 2018

The entertainment system of the aircraft has changed its paradigm in the form of using passenger electronic devices instead of using a fixed monitor. This has simplified the on-board equipment while the risk of safety has increased with the electric charging of portable electronic devices. Unlike personal portable electronic devices that do not have a transmission function, the use of Wi-Fi enabled electronic devices(T-PED) is allowed and the battery is required to be charged in the cabin. In this study, we used the NASA Aviation Safety Reporting System to investigate the effects of changes in wireless environment and entertainment service. Based on this, we analyzed the risks of personal electronic devices by sharing event occurrence cases caused by in-flight electronic equipment or passenger portable electronic devices(especially smart phones) from the viewpoint of aircraft safety management. This analysis includes identification of potential hazards and risk assessment, and finally the strategies for risk mitigation for safe use of portable electronic devices are suggested.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.594-600
• /
• 2011

"The guidelines on the management of indoor air quality of public transportation" was enacted in December 2006 due to the fact that the interest and demand of improving the air quality for citizen using public transportation have been increased. Thus this research has considered what has influenced on the passenger cabin HVAC as well as the improvement of customer service as we proceed the study for better indoor air quality inside of the train by developing the module of cleaning air system for pollutants of a car air.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.177-182
• /
• 2004

Railroad car is one of major public transportation because of an increase in population and heavy traffic problems. We design the concept with air filtration of HVAC system using CFD, select environment-friendly components and compose intellectual HVAC system. For this object, the research to connect HVAC system which control temperature, humidity, air flow with pollutant controlling system which can deal with particular dust, nasty smell. In case of train, fresh air should be provided continuously for pleasant environment of the cabin every season. The air will control outer dust, inner particular dust, $CO_2$ density by air conditioning, heating, humidity regulating, air filtering and ventilating. Ventilation system on passenger cars should be designed for the health and comfort of the passengers.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.883-888
• /
• 2004

Pressure waves are generated when high speed train runs through the tunnels. These pressure waves not only affect passenger's health, but also can cause fatigue failures on the vehicle structure. The current high speed train should run on the conventional lines. In this study, pressure fluctuations by the high speed trains such as G7 Korea High Speed Train and Korea Train eXpress are measured in the cabin and the carbody surface when they pass through the tunnels. The measured results are analyzed and the related parameters are investigated.