• The Korean Society of Law and Medicine
• /
• v.12 no.2
• /
• pp.163-187
• /
• 2011

On March 11, 2011, the Korea National Assembly finally passed the bill on the Damage Relief on the Medical Malpractice and Mediation for Medical Dispute. One of the features of this Act is including "The Subrogation Payment System for Damage (abbreviated SPSD)". This System is that 'Korean Medical Dispute Mediation-Arbitration Board' pays the damages, instead of the health care provider, for the patient who isn't paid damages by the health care provider despite of the Mediation or ruling. The purpose of this study is to search the problems and make improvement on SPSD. This System was introduced extreamly to the patients in order to induce them to the mediation. However,there remains several problems. In this articles, I have examined thoroughly the legal issues on SPSD. There are legal issues about the methods and ratio of the financial burden. In this connection, wide discretionary authority has been granted to administrative agencies specifically. On this account, this System clearly contains elements of a violation against the Constitutional Law. Moreover, this System can be broadly applied to the case of court ruling or the Korea Consumer Agency's mediation. But these measures go against the aim of legislation that the medical dispute can be resolved through the mediation or arbitration by this Act. In the end, these problems must be revised through the additional discussion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.553-556
• /
• 2008

We have studied about chloride penetration test by electrical conductance to 10 specimens made from same test batch. The coefficient of variation of total passed charge(Colombs) was about 24% in same specimens, and we draw a conclusion this method has a low reliability. Owing to complicated reaction ; heterogeneous material, mixing error and error of testing method, then we must consider the scope of the error which is introduced. Specially when you trying to get one test result against one spcimen, you can commit a big error, therefore we recommend that you use mean value against 3 specimens at least.

• Electronics and Telecommunications Trends
• /
• v.37 no.4
• /
• pp.19-27
• /
• 2022

The coronavirus disease 2019 (COVID-19) pandemic has significantly changed the Lifeline Program, a telecommunications rate discount program for low-income Americans. As the reliance on online activities such as remote work, distance education, and online shopping grows because of the spread of COVID-19, there is a concern that the digital divide will widen among low-income households that struggle to access internet infrastructure due to the burden of access rates. Accordingly, the US Congress passed a bill to help lower the internet bill for low-income households using the government budget to close the digital divide. The Lifeline Program, which is a part of the universal service obligation, has been in charge of the telecommunications rate discount for low-income households. However, according to the new law, the internet rate discount program based on the government budget was implemented beginning in 2021. As the internet rate discount based on the government budget begins, the US telecommunication rate discount system is transitioning from a system in which telecommunication industry support was borne by operators to one in which public support from the government budget will play a significant role. In this paper, we will look at recent changes in the US telecommunications rate discount program and their implications.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.649-655
• /
• 2015

As a novel water treatment membrane, concept of ceramic-based graphene membrane (CbGM) was suggested, and its mass transport behavior was investigated. The selectivity of CbGM was given by graphene material which is consisting of active layer, only transmitting water, but rejecting salts. Filtration-assisted assembly methods was employed as a facile method to fabricate CbGM. Surface morphology and characteristics of CbGM were analyzed by scanning electron microscopy (SEM) and contact angle. In addition, three different kinds of solutes (i.e., NaCl, $MgCl_2$, $Na_2SO_4$) were tested in batch forward osmosis system to confirm the mass transport behavior. Through surface morphology analysis and mass transport behavior, it was revealed that interlocking between graphene layers is very important, rather than thickness of laminated graphene layers, in terms of selectivity to CbGM. All the anions in each solute showed faster transport than those of cations. In addition, solutes which have high ion valence charge ratio of anion to cation ($Z^-/Z^+$) was easier to be passed through CbGM. It indirectly implied that the surface charge of CbGM appear to be positive. In addition, It showed that surface charge of CbGM has a great role on mass transport, in particular, transport of matter having charges, generally ions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.105-112
• /
• 2009

In this paper, we investigated abnormal ESD failure on guard-rings in the smart power IC fabricated with $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology. Initially, ESD failure occurred below 200 V in the Machine Model (MM) test due to current crowding in the parasitic diode associated with the guard-rings which are generally adopted to prevent latch-up in high voltage devices. Optical Beam Induced Resistance Charge (OBIRCH) and Scanning Electronic Microscope (SEM) were used to find the failure spot and 3-D TCAD was used to verify cause of failure. According to the simulation results, excessive current flows at the comer of the guard-ring isolated by Local Oxidation of Silicon (LOCOS) in the ESD event. Eventually, the ESD failure occurs at that comer of the guard-ring. The modified comer design of the guard-ring is proposed to resolve such ESD failure. The test chips designed by the proposed modification passed MM test over 200 V. Analyzing the test chips statistically, ESD immunity was increased over 20 % in MM mode test. In order to avoid such ESD failure, the automatic method to check the weak point in the guard-ring is also proposed by modifying the Design Rule Check (DRC) used in BCD technology. This DRC was used to check other similar products and 24 errors were found. After correcting the errors, the measured ESD level fulfilled the general industry specification such as HBM 2000 V and MM 200V.

• Korean Security Journal
• /
• no.40
• /
• pp.57-86
• /
• 2014

As the revision of Building Code including applying crime prevention design to buildings passed recently and target hardening ought to be evidence-based, we studied the Modus Operandi (MO) and intrusion tools of domestic burglary to earn basic data for improvement of crime prevention hardware in the future. To be specific, we reviewed related academic literature and police official statistics of domestic burglary critically and interviewed detectives in charge of burglary to specify and categorize MO and tools. We can derive some implications from research findings, including improvement of the statistical system for the MO of burglary, active sharing of the MO of burglary among the criminal justice agencies and related industries and experts. Also, crime prevention advice and education for the local residents focused on MO of burglary can be recommended. Based on this research, to enhance the level of community safety significantly, performance tests of crime prevention hardware such as security doors and windows etc. and the study on related certification system should be vitalized.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.113-119
• /
• 2010

This study presents experimental findings on the performance of cement concrete pavement incorporating mineral admixtures such as ground granulated blastfurnace slag and silica fume. Flexural strength, compressive strength, charge passed, diffusion coefficient of chloride ions and initial surface absorption of cement concrete pavement incorporating mineral admixtures were periodically measured and the corresponding results were compared to those of plain concrete pavement. As a result, strength behaviors of concrete pavement were dependent on the types of mineral admixtures. However, it was true that incorporation of silica fume had a beneficial effect on compressive strength development. Furthermore, the application of mineral admixtures led to a lower diffusion coefficient of chloride ions compared to plain concrete pavement. Based on the experimental results, the present study would be helpful to design high-performance cement concrete pavement.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.2
• /
• pp.43-53
• /
• 1998

The National Health Promotion Law passed in 1995 was a milestone for initiating a national health promotion program in Korea, and government officers and health professionals are working on how to approach health promotion issues. The purpose of this study was to analyse methods and use of constructivist paradigm in health promotion and education. The health promotion area needs community empowerment, building community partnerships, and community capacity. To meet these health promotion requirements health promotion workforce should be trained through professional preparation programs that contains communication skills, group process skills, and management of programs in advanced countries such as the United States and Australia. Skills and responsibilities of those who are in charge of providing health promotion services have not yet been clearly defined in Korea because the area of health promotion is a multi-academic field, and needs a different approach, constructivist approach. Constructivist paradigm requires relativism, reasoning skills, collaborating, and motivation. These components are needed for community empowerment. Constructivism also has been applied to the field of education. Problem-based education, outcome-based education, performance-based education came from the constructivism. These educational methods are student-centered method. As the modernizing society becomes more complicated, traditional or conventional teacher-centered education cannot meet the needs of students. Students need to learn skills necessary to make healthy decisions with individual value system. So these interactive, self-learning methods can serve much more to the learner. Constructivist educational methods can be applied to educational programs in computers, too. To expand and differentiate the area of health education and health promotion from other health related fields, it is crucial to devote efforts in application and development of constructivist methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2009-2014
• /
• 2017

A novel structure of phase locked loop (PLL) with a time constant comparator and a current compensator has been proposed. The proposed PLL uses small capacitors which are impossible for stable operation in a conventional PLL. It is small enough to be integrated into a single chip. The time constant comparator detects the loop filter output voltage variations using signals which are passed through small and large RC time constants. The signal from the large RC time constant node is the average of the loop filter output voltage. The output voltage of another node is approximately equal to the present loop filter voltage. The output of the time constant comparator controls a current compensator and charge/discharge small size loop filter capacitors. It makes the proposed PLL operate stably. It has been simulated and proved by HSPICE in a CMOS $0.18{\mu}m$ 1.8V process.