• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.379-385
• /
• 2002

In this paper, frequency trifler fur 8 GHz local oscillator was designed and fabricated using MESFET. The third order harmonic was generated by biasing the transistor on A class. The fundamental frequency and the second harmonic were suppressed by using λ$\_$g//2 stub and band pass filter. As results, conversion gain of 2.67 ㏈ at 8.31 GHz, the harmonic suppression of -41.17 ㏈c, the bandwidth of 510 ㎒ were measured.red.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.41-48
• /
• 1998

This paper proposes a new addition algorithm to improve the addition speed which is one of the important factors for data path functions. We have designed a fast 64-bit adder utilizing al dynamic chain architecture based on the proposed Sum-Selector Generation (SSG) algorithm. Proposed adder is designed with pass-transistor logicto achieve a high speed operation in low voltage circumstance. Realized 64-bit adder with 0.8.mu.m CMOS double-metal process technology has been fully tested. it operates at 185 MHz with 5.0V and chip area occupies 3.66mm$^{2}$. It is also demonstrated that designed adder operates even at 2.0V power supply condition.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.67-70
• /
• 2003

In this paper the main topologies of one-bit full adders, including the most interesting of those recently proposed, are analyzed and compared for speed, power consumption, and power-delay product. The comparison has been performed on circuits, optimized transistor dimension to minimize power-delay product. The investigation has been carried out with properly defined simulation runs on a Cadence environment using a 0.25-${\mu}m$ process, also including the parasitics derived from layout. Performance has been also compared for different supply voltage values. Thus design guidelines have been derived to select the most suitable topology for the design features required. This paper also proposes a novel figure of merit to realistically compare n-bit adders implemented as a chain of one-bit full adders. The results differ from those previously published both for the more realistic simulations carried out and the more appropriate figure of merit used. They show that, except for short chains of blocks or for cases where minimum power consumption is desired, topologies with only pass transistors or transmission gates are not attractive.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.51-51
• /
• 2001

본 논문에서는 CMOS 로직과 pass-transistor logic(PTL)의 장점만을 가진 새로운 복합모드로직(Compound Mode Logic)을 제안하였다. 제안된 로직은 VLSI설계에서 중요하게 부각되고 있는 저전력, 고속 동작이 가능하며 실제로 전가산기를 설계하여 측정 한 결과 복합모드 로직의 power-delay 곱은 일반적인 CMOS로직에 비해 약 22% 개선되었다 제안한 복합모드 로직을 이용하여 고성능 32×32-bit 곱셈기를 설계 제작하였다. 본 논문의 곱셈기는 개선된 사인선택(Sign Select) Booth 인코더, 4-2 및 9-2 압축기로 구성된 데이터 압축 블록, 그리고 carry 생성 블록을 분리한 64-bit 조건 합 가산기로 구성되어 있다. 0.6um 1-poly 3-metal CMOS 공정을 이용하여 제작된 32×32-bit 곱셈기는 28,732개의 트랜지스터와 1.59×l.68 ㎜2의 면적을 가졌다. 측정 결과 32×32-bit 곱셈기의 곱셈시간은 9.8㎱ 이었으며, 3.3V 전원 전압에서 186㎽의 전력 소모를 하였다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.573-574
• /
• 2008

In this paper, we propose a mixed driving circuit for the source driver of QVGA-scale TFT-LCD driver IC to reduce the area of the source driver. In the mixed driving circuit, graphic data pass or go through the mixed channel driver whether RGB data are the same or not. The mixed driving circuit has been designed in transistor level using the 0.35um CMOS technology and has been verified using Hspice.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.356-359
• /
• 1999

A high performance 16bit multiplier for asynchronous systems has been designed using asynchronous design methodology. The 4-radix modified Booth algorithm, TSPC (true single phase clocking) registers, and modified 4-2 counters using DPTL (differential pass transistor logic) have been used in our multiplier. It is implemented in 0.65${\mu}{\textrm}{m}$ double-poly/double-metal CMOS technology by using 6616 transistors with core size of 1.4$\times$1.1$\textrm{mm}^2$. And our design results in a computation rate exceeding 60MHz at a supply voltage of 3.3V.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.33-41
• /
• 1998

We have designed a high speed and low power 16bit-ELM adder with variable-sized cells uitlizing the fact that the logic depth of lower bit position is less than that of the higher bit position int he conventional ELM architecture. As a result of HSPICE simulation with 0.8.mu.m single-poly double-metal LG CMOS process parameter, out 16bit-ELM adder with variable-sized cells shows the reduction of power-delay-product, which is less than that of the conventional 16bit-ELM adder with reference-sized cells by 19.3%. We optimized the desin with various logic styles including static CMOs, pass-transistor logic and Wang's XOR/XNOR gate. Maximum delay path of an ELM adder depends on the implementation method of S cells and their logic style.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.175-181
• /
• 2006

A new CMOS voltage-controlled fully-differential transconductor is presented. The basic structure of the proposed transconductor is based on a four-MOS transistor cell operating in the triode or saturation region. It achieves a high linearity range of ${\pm}\;1\;V$ at a 1.5 V supply voltage. The proposed transconductor is used to realize a new fully-differential Gm-C low-pass filter with a minimum number of transconductors and grounded capacitors. PSpice simulation results for the transconductor circuit and its filter application indicating the linearity range and verifying the analytical results using $0.35\;{\mu}m$ technology are also given.