• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.3
• /
• pp.97-104
• /
• 2000

Studies on the principle of traditional moulding techniques of architecture or structure are very important in the point of the work could accomplish succession to modern design. As an attempt of these work, this study tried to examine traditional moulding techniques applied in planes of ancient architecture and structure closely. The major findings of this study are summarized as follows; It was verified that planes of ancient Korean architectures and structures analyzed in this study was moulded by its multiple partitions with the six or eight partitions of circumference as the fundamental form. The well unearthed in kyong-bok palace recently was moulded by a concentric circle assumed form of 4 circle which was extended with equal interval and divided into multiple of 8 partition of circumference. Chon-duk-jung in chang-duk palace also was moulded by a concentric circle assumed form of 3 circle extended with equal interval, but circle were divide by 6 partitions. It was also found that 6$^{\circ}$§8 partitions of circumference(or its multiple partition) was applied to not only above structures but also the moulding planes of ancient architecture, and as a results, figures revealed in architectures analyzed is classified into three classes. And, this study analyzed arrangements of two temples. As a results, it is discovered that the Grid used in moulding planes of each building fixed the arrangement of buildings. Therefore, moulding by equal partition of circumference decided the form of each building and the relation of element at the same time.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1495-1507
• /
• 2022

The improvement of thermal-hydraulic analysis techniques is essential to ensure the safety and reliability of nuclear power plants. The one-dimensional two-fluid model has been adopted in state-of-the-art thermal-hydraulic system codes. Current constitutive equations used in the system codes reach a mature level. Some exceptions are the partition method of wall friction in the momentum equation of the two-fluid model and the interfacial drag force model for a horizontal two-phase flow. This study is focused on deriving the partition method of wall friction in the momentum equation of the two-fluid model and modeling the interfacial drag force model for a horizontal bubbly flow. The one-dimensional momentum equation in the two-fluid model is derived from the local momentum equation. The derived one-dimensional momentum equation demonstrates that total wall friction should be apportioned to gas and liquid phases based on the phasic volume fraction, which is the same as that used in the SPACE code. The constitutive equations for the interfacial drag force are also identified. Based on the assessments, the Rassame-Hibiki correlation, Hibiki-Ishii correlation, Ishii-Zuber correlation, and Rassame-Hibiki correlation are recommended for computing the distribution parameter, interfacial area concentration, drag coefficient, and relative velocity covariance of a horizontal bubbly flow, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.264-268
• /
• 2001

We manipulate properly the partition function of the surface system to evaluate an adsorption isotherm. We explain the dependence of strong interaction on the surface phase transition via analysis of the derived adsorption isotherm. Our theoritical results for adsorption well reflect to the experiments.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.395-406
• /
• 2008

An excavation with the depth of 32.7m will be constructed as a ventilation shaft in Shanghai metro Line 9. The excavation induced effect on a nearby undercrossing road in operation must be properly evaluated. A centrifuge model test was conducted to study the impact of deep excavation on this existing undercrossing. Detail simulation works are described in this paper. The excavation steps could be simulated in the no-stop state of centrifuge machine. And induced settlements of the undercrossing road in both parallel and vertical directions were analyzed. Protective partition cement soil piles were also simulated in the tests. Simulation test shows deep excavation has a great influence on undercrossing road and the partition pile can obviously deduce the influence.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.329-333
• /
• 2011

p-phenylene-2,5-benzobisoxazole (PBO; Zylon$(R)$) fibers as an adsorbent were employed for solid phase extraction of aqueous alkylphenols. The removal ratios for 10 kinds of alkylphenols at initial concentration of $100{\mu}gL^{-1}$ were in the range of 16.8-96.3% and the removals increased with the increase of the phase ratio (fiber weight/solution volume). The plots of the logarithm of partition coefficient (log K) were correlated with the logarithm of the n-octanol/water partition coefficient (log P). The adsorbed alkylphenols were completely desorbed with the mixture of acetonitrile and dichloromethane.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.331-337
• /
• 2001

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaegers formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along ling of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• Tribology and Lubricants
• /
• v.18 no.6
• /
• pp.389-395
• /
• 2002

The surface temperature at the interface of bodies in a sliding contact is one of the most important factors influencing the behavior of machine components. The calculation of the surface temperature at a sliding contact interface has been an interesting and important subject for tribologist. Temperature analyses were usually performed under the consideration contacted two bodies as semi-infinite. But the analysis was difficulty in being applied to finite body and considering the boundary condition. In this study, contact temperature rise of two finite bodies and surfaces due to frictional heating under the rectangular and the circular sliding contact is calculated. Heat partition factor is calculated using semi-infinite solid analysis and the temperature of the finite bodies is calculated using FVM. It will be shown that Most frictional heat in the fore part of contact region for sliding direction is conducted into body that has a moving heat source and the site of the maximum temperature rise moves to the opposite direction of sliding during sliding.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.687-689
• /
• 2014

This paper deals with the optimal muffler model by using acoustic analysis and CFD(computational fluid dynamics) analysis. The complicated muffler model could be better noise reduction performance. However, it could be worse affected to back-pressure performance by pressure drop in working fluid. High back-pressure is caused to low system efficiency. Therefore, it is important for the muffler design to consider the pressure drop. The muffler models are changed their partition plate position. Acoustic power transmission loss(TL) and pressure drop of working fluid are calculated by using computational analysis and used to build database for finding their trends. The optimal muffler model in user-interested frequency range could be selected by analyzing this database.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.71-77
• /
• 2016

The electrolyte of the capacitor in mobile phone chargers leaks to the power input terminal resulting in tracking on the PCB board to form a carbonized conductive path. As a result of structural analysis of the cause of the tracking, It occurred when the power input terminal and the PCB board were connected directly using the connector. The larger the amount of electrolyte leaked from the capacitor into the power input terminal, or the lower the height of the partition provided between the plug pins of the power input terminal, the higher the tracking occurrence rate. Accordingly, to lower the occurrence rate of tracking in the charger, it is necessary to provide a partition on the capacitor or increase the height of the partition provided on the power input terminal so that the leaked electrolyte does not flow to the power input terminal. In addition, the tracking occurrence rate will be reduced further if the shape of the PCB board touching ther power connection terminal is changed to ${\Pi}$.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.525-530
• /
• 2006

This paper presents an efficient input variable selection method using both fixed-point independent component analysis(FP-ICA) and adaptive partition mutual information(AP-MI) estimation. FP-ICA which is based on secant method, is applied to quickly find the independence between input variables. AP-MI estimation is also applied to estimate an accurate dependence information by equally partitioning the samples of input variable for calculating the probability density function(PDF). The proposed method has been applied to 2 problems for selecting the input variables, which are the 7 artificial signals of 500 samples and the 24 environmental pollution signals of 55 samples, respectively The experimental results show that the proposed methods has a fast and accurate selection performance. The proposed method has also respectively better performance than AP-MI estimation without the FP-ICA and regular partition MI estimation.