• Korean Journal of Poultry Science
• /
• v.15 no.4
• /
• pp.261-268
• /
• 1988

The effect of two particle size ranges (80% of the particles in the ration less than 1.19mm ; and 40% of the particles in the ration less than 1.1mm) and two different levels of protein (18% and 12% ) on the activity of mold inhibitors in commercial ration was determined by measuring mold count, CO$30^{\circ}C$ production and aflatoxin concentration. A commercial fungistat was mixed in the treated diets at the level of 0.1% (W/W). Two types of experimental diets (18% & 12% protein) which contained 12.6 and 12.7% moisture content each were stored under the forced air humidifier at 85% humidity and a controlled-temperature of 29＋1$30^{\circ}C$ for 5 to 40 days. Mold count and CO$30^{\circ}C$ levels in the feed treated with mold inhibitor were significantly higher (P＜0.05 and P＜0.01 respectively) when 40% of the ration's particle size was<1.19mm. The different protein levels in the ration treated with mold inhibitor did not have a significant effect (P＞0.05) on the mold count and $CO_2$ production. Protein level $\times$ particle size range interaction on the $CO_2$ production was significant (P＜0.05). Aflatoxin production in the experimental diet with mold inhibitor was significantly (P＜0.05) affected by the levels of protein and the different particle size ranges. The interaction of protein levels and particle size ranges on the aflatoxin production was significant (P＜0.05) at 40 days of storage.

• Clean Technology
• /
• v.7 no.1
• /
• pp.81-88
• /
• 2001

Limestone has been used as absorbent in the FGD(Flue Gas Desulfurization) system, the DeSOx system of thermal power plant. This study investigated the desulfurization characteristics of the two different limestones, 325mesh and 200mesh particle size. Experimental analysis showed that the dissolving rate of limestone became much slower as the particle size increased. But the desulfurization efficiency depended on the L/G(liquid/gas) ratio and slurry pH regardless of the limestone particle size. The quality of gypsum produced in the FGD process increased as the limestone particle size or the slurry pH decreased. To reduce the cost of absorbent, the mixed limestone which were composed of 200 and 325mesh limestone with 5 different ratios were tested.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.288-296
• /
• 2017

In this study, the effect of spray-drying conditions and surfactant addition on the spray-drying yield, morphological characterization, size distribution and re-dispersity in water of spray-dried lignocellulose nanofibril (LCNF) were investigated. The freeze-dried LCNF after solvent exchange had linear fiber morphology with a diameter of 70-300 nm, and the spray-dried LCNF showed rod-like particle morphology. The spray-drying yield and particle size of spary-dried LCNF at $140^{\circ}C$ was highest and smallest, respectively. As LCNF concentration and blowing rate decreased and increased, respectively, the spray-drying yield and particle size were increased. The highest spray-drying yield was found at distearyl dimethyl ammonium chloride (DDAC) addition of 10 phr at $140^{\circ}C$. As the particle size decreased and the DDAC content increased, filtration time of spray-dried LCNF in water was decreased and increased, respectively.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.332-337
• /
• 2012

The primary objective of this work is to find the properties of sustained release dissolution pattern depending on solubility of drugs, so venlafaxine HCl and carbamazepine tablets were made by using polymer wich various particle size. Hydroxy propyl methyl cellulose (HPMC) has been utilized in this study as an excipient that is one of the most widely used polymers for an oral sustained release formulation, and drug release pattern was strongly influenced by swelling rate depending on particle size of HPMC. Scanning electron microscope (SEM) was employed to investigate the surface of tablets with various HPMC particle size, and differential scanning calorimeter (DSC) was employed to investigate the crystallization of drugs in tablets. The release model equation was applied to analyze the main mechanism of drug release pattern. The results demonstrate that drug release pattern is controlled by the drug solubility and HPMC particle size.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1984

The effect of particle size on adsorption of trihalomethane have been studied. Using mean particle sizes ranging from 0.73 to 2.03 mm, physical properties of carbon and trihalomethane adsorption characteristics have been investigated experimentally. With increasing particle size specific surface area and pore volume decreased, and the mean pore radius increased significantly. Large pores were dominant in large particles, while small particles were composed of small pores. Isotherm studies were conducted using static bottle point technique and the results were well described by the Freundlich isotherm equations. The adsorption capacity increased significantly with decreased particle size. Additionally micro-column tests were carried out, and the results were compared with the model simulation. From the micro-column studies it was found out that the film transfer coefficient were almost constant, and the differences in the trihalomethane removal efficiency was mainly due to the differences in the adsorption capacity of the particles of different size.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.309-315
• /
• 2001

The effects of soaking time of nonwaxy rice and particle size of rice flour on the properties of nonwaxy rice flour after steeping at room temperature were investigated. Nonwaxy rice was soaked at 20$^{\circ}C$ for 0, 1, 12, or 24hr, dried at room temperature and milled. Nonwaxy rice flours were passed through 45 mesh or 100 mesh sieve, and were compared for the properties depending on the particle size and soaking time. The particles of rice flour were separated into 10$\mu\textrm{m}$∼30$\mu\textrm{m}$ and 40$\mu\textrm{m}$∼80$\mu\textrm{m}$ groups, and the amount of large particle size(40$\mu\textrm{m}$∼80$\mu\textrm{m}$) was greater in the flour sieved through 45 mesh than 100 mesh sieve. The protein and ash contents decreased and amylose contents increased as the soaking time increased. The water-binding capacity increased rapidly up to 1 hr of soaking and increased slowly thereafter. The swelling power and the solubility increased with temperature rising in the range of 65$^{\circ}C$∼95$^{\circ}C$, and these two properties increased rapidly up to 12 hr of soaking. Peak viscosity and breakdown of the pastes prepared with 12 hr-soaked nonwaxy rice flour were higher than those with 1 hr-soaked ones, while the setback and viscosity at 95$^{\circ}C$ of 12 hr-soaked ones were lower than 1hr-soaked ones.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.630-637
• /
• 2015

In the dairy industry, natural plant-based powders are widely used to develop flavor and functionality. However, most of these ingredients are water-insoluble; therefore, emulsification is essential. In this study, the efficacy of high pressure homogenization (HPH) on natural plant (chocolate or vanilla)-based model emulsions was investigated. The particle size, electrical conductivity, Brix, pH, and color were analyzed after HPH. HPH significantly decreased the particle size of chocolate-based emulsions as a function of elevated pressures (20-100 MPa). HPH decreased the mean particle size of chocolate-based emulsions from 29.01 μm to 5.12 μm, and that of vanilla-based emulsions from 4.18 μm to 2.44 μm. Electrical conductivity increased as a function of the elevated pressures after HPH, for both chocolate- and vanilla-based model emulsions. HPH at 100 MPa increased the electrical conductivity of chocolate-based model emulsions from 0.570 S/m to 0.680 S/m, and that of vanilla-based model emulsions from 0.573 S/m to 0.601 S/m. Increased electrical conductivity would be attributed to colloidal phase modification and dispersion of oil globules. Brix of both chocolate- and vanilla-based model emulsions gradually increased as a function of the HPH pressure. Thus, HPH increased the solubility of plant-based powders by decreasing the particle size. This study demonstrated the potential use of HPH for enhancing the emulsification process and stability of the natural plant powders for applications with dairy products.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.88-100
• /
• 2003

A change of filtrate flux in Taylor vortex flow filtration was investigated experimentally by rotating speed of inner cellulose ester membrane cylinder (average pore size: 1.2 ${\mu}m$), slurry concentration, and particle size. The filtrate flux was a direct proportion relation with TMP, but an inverse relation with resistances. A change of cake resistance with time was examined by rotating speed, slurry concentration, and particle size. Initial resistance increased dramatically as raising slurry concentration, and the pseudo-steady state was maintained at high resistance value. However, times to reach the pseudo-steady state did not depend on slurry concentration. The resistance was larger as smaller particle size, because possibility of pore blocking inside membrane could be higher and shear effect should be lower as smaller particle size. A model equation suggested in this study was composed of particle deposition and removal terms, and could confirm well experimental data using average values of experimental coefficients.

• Toxicological Research
• /
• v.28 no.4
• /
• pp.209-216
• /
• 2012

The biological activity of particles is largely dependent on their size in biological systems. Dispersion in the aqueous phase has been both a critical impediment to and a prerequisite for particle studies. Carbon black has been used as a surrogate to investigate the biological effects of carbonaceous particles. Here, biocompatible methods were established to disperse carbon black into ultrafine and fine particles which are generally distinguished by the small size of 100 nm. Carbon black with a distinct particle size, N330 and N990 were suspended in blood plasma, cell culture media, Krebs-Ringer's solution (KR), or physiological salt solution (PSS). Large clumps were observed in all dispersion preparations; however, sonication improved dispersion - averaged particle sizes for N330 and N990 were $85.0{\pm}42.9$ and $112.4{\pm}67.9$ nm, respectively, in plasma; the corresponding sizes in culture media were $84.8{\pm}38.4$ and $164.1{\pm}77.8$ nm. However, sonication was not enough to disperse N330 less than 100 nm in either KR or PSS. Application of Tween 80 along with sonication reduced the size of N330 to less than 100 nm, and dispersed N990 larger than 100 nm ($73.6{\pm}28.8$ and $80.1{\pm}30.0$ nm for N330 and $349.5{\pm}161.8$ and $399.8{\pm}181.1$ nm for N990 in KR and PSS, respectively). In contrast, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) exhibited little effect. Electron microscopy confirmed the typical aciniform structure of the carbon arrays; however, zeta potential measurement failed to explain the dispersibility of carbon black. The methods established in this study could disperse carbon black into ultrafine and fine particles, and may serve as a useful model for the study of particle toxicity, particularly size-related effects.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.233-236
• /
• 2012

The driving properties of a particle-insertion method that filters non-moving particles are analyzed, by measuring its optical and electrical properties. An area that is occupied by the moved particles is proposed, as a desirable evaluation method for a reflective display. To compare the driving property of the particle-moving method with that of the reported simple particle-loading method, two panels are fabricated, according to the different particle-insertion methods, in the same panel condition, of which the width of ribs is $30{\mu}m$, the cell size is $220{\mu}m{\times}220{\mu}m$, the cell gap is $116-120{\mu}m$, the q/m value of the black particles is $+1.8{\mu}C/g$ and that for the white particles is $-4.3{\mu}C/g$. The particle-moving method has a filtering effect which excludes the non-moving particles, inserting only movable particles into the respective cell, so that a panel fabricated by the particle-moving method can drive most of the particles in a cell. Also, most of the particles move at the threshold voltage of 40 V, with enhanced reflectivity. The driving property is also verified by measurement of the occupation rate of the moved particles.