• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.37-41
• /
• 2001

Photo catalytic characteristics of nano-sized TiO$_2$ powder with rutile phase produced using homogeneous precipitation process at low temperatures (HPPLT) were compared with those of commercial P-25 powder by Degussa Co. The TiO$_2$ powder by HPPLT showed very higher photoactivity in the removal rate, showing lower pH values in the solution, than the P-25 powder when eliminating metal ions such as Pb and Cu from aqueous metal-EDTA solutions. This can be inferred the more rapid photo-oxidation or -reduction of metal ions from the aqueous solution, together with relatively higher efficiencies in the use of electron-hole pair formed on the surface of TiO$_2$ particle, under UV light irradiation. Also, in the view of the TiO$_2$ particle morphology, compared to the well-dispersed spherical P-25 particle, the agglomerated TiO$_2$ particle by HPPL T consists of acicular typed primary particle with the thickness ranged of 3∼7 nm, which would be more effective to the photocatalytic reactions without electron-hole recombination on the surface of the TiO$_2$ particle under the UV light irradiation. It is, therefore, thought that the higher photo activity of the rutile TiO$_2$ powder by HPPLT in the aqueous solutions resulted from having its higher specific surface area as well as acicular shape primary particle with very thin thickness.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.534-541
• /
• 2003

Membrane processes are now frequently considered for application in drinking water treatment. The biggest impediment for applying membrane processes is fouling that comes from mass flux (such as particle and organic matter) to the membrane surface and its pores due to convection flow through the membrane. Natural organic matter (NOM) has been reported as the most detrimental foulant. Some research also indicated that particles were often the dominant cause of fouling. Therefore, both NOM and particle fouling need to be examined to better understand fouling in ultrafiltration. Two waters from natural sources, Lake Austin water and Missouri River water, were selected. Both waters are relatively hard waters but has significantly different particle concentrations, which will elucidate effects of particles on membrane fouling. Precipitative softening is traditionally designed to remove hardness ions in hard waters but it can also remove particles and organic matter. Therefore, the integrated water treatment with softening and ultrafiltration is proposed as a promising option for hard waters. The three levels of softening were used to represent different degrees of pretreatment to ultrafiltration in terms of organic matter (i.e., NOM fouling) and precipitates (i.e., particle fouling by further precipitation). Results showed that natural particles in Missouri River water was detrimental foulants of ultrafiltration. As the levels of softening were increased, NOM and particle removal was increased, and thus fouling was decreased. Direct images of the surface of the membranes by scanning electron microscopy allowed observation of the different properties of particles caught in fibril networks of natural organic matter.

• Journal of Electrochemical Science and Technology
• /
• 제3권4호
• /
• pp.172-177
• /
• 2012

Mo-doped $LiFePO_4$ was synthesized via co-precipitation method using sucrose as the carbon source. Structure, surface morphology, and the electrochemical properties of the synthesized olivine compounds were investigated using Rietveld refinement of X-ray diffraction data (XRD), scanning electron microscopy (SEM), and electrochemical charge-ischarge tests. Spherical morphology with the particle size of ${\sim}8{\mu}m$ authenticated the enhanced tap density and volumetric energy density of the synthesized materials. Charge-discharge behavior of $LiFePO_4$ and Mo-doped $LiFePO_4$ cells demonstrated a specific capacity of 130 and 145 mAh $g^{-1}$, respectively. Mo-doped $LiFePO_4$ cells exhibited an excellent discharge capacity at 96 mAh $g^{-1}$ at 7 C-rate.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.89-96
• /
• 2004

Hydroxyapatite powder were synthesized by precipitation method, varying pH, and reaction temperature. The powders were heated at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$ for fabrication of dental prosthesis. The results are as follows: Synthesized powder showed the smallest particle in size, under the conditions of pH 11 and reaction temperature 37$^{\circ}{\cdots}$. The hydroxyapatite was partially converted to $\alpha,\;\beta$-TCP at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$. Mechanical strength of sample was affected by such powder preparation conditions as pH and reaction temperature and sintering temperature. The mechanical strength of sample prepared under the same conditions was increased with increasing pH, reaction temperature and sintering temperature.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.207-210
• /
• 2015

Modifications in the structural and magnetic properties of co-precipitated cobalt ferrite nanoparticles can be accomplished by varying the annealing time periods during the synthetic process. Experimental results show that high-purity cobalt ferrite nanoparticles are obtained using a co-precipitation process. The dependence of the crystallite sizes on the annealing time was successfully demonstrated using XRD and SEM. Finally, vibrating sample magnetometer analyses show that the magnetic properties of the cobalt ferrite nanoparticles depend on their relative particle sizes.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.91-102
• /
• 1996

Microstructural control to produce multiphase structure has received much attention to improve the high temperature strength as well as low temperature ductility of intermetallics. Transmission electron microscopic investigation has been carried out concerning the effect of Cr-precipitation on the mechanical properties of B2-ordered NiAl containing 4 to 8 mol% of Cr. By aging at temperatures around 973 K after solution annealing, fine spherical precipitates took place homogeneously in the NiAl matrix and the alloys hardened appreciably. Selected area electron diffraction (SAED) patterns have not revealed any additional extra-spots during aging, because the Cr-particles show cube-cube orientation relationship and keep a perfect coherency with the ordered matrix lattice. Dislocations were confirmed to bypass the particles during deformation. Although the dispersion of Cr-particles increased the yield strength of NiAl at intermediate temperature, the strength decreased appreciably at higher temperatures.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1155-1162
• /
• 2009

To investigate the influence of water area calmness on the red tide development, runoff phenomena due to antecedent precipitation of red tide development day were analyzed. There were examined the water quality variation properties at about the same time of the red tide develop. The red tide was developed when the stage and discharge nearly had not changed. It was estimated that the stability of particle behavior in the mouth of river effected on the red tide develop. Also, the concentrations of $COD_{Mn}$ were increased about 241~629% when the red tide developed.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.511-517
• /
• 2008

We make high-functional inorganic-composite pearlescent pigment material that coated with carmine on the plate-type particle such as mica. In this experiment, we synthesized composite powder using pH control precipitation method. We make an experiment with changing as synthesis factors that are concentrations of starting material and precipitation materials. We analyzed pearlescent powder's shape, and crystallization with FE-SEM, XRD, and EDS. Optimum condition for preparation of carmine coated mica pearlescent pigment is pH $4.5{\sim}5.5$.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5299-5303
• /
• 2013

Poly(butyl methacrylate-co-polyethyleneglycol methacrylate)(Poly(BMA-co-PEGMA)) microsphere은 침전중합법으로 에탄올 용액에서 제조하였으며 마이크로스페어의 입자 크기는 모노머인 BMA와 PEGMA의 농도조건에 따라 140-210nm까지 조절 할 수 있었다. PEGMA의 농도가 증가할 수록 마이크로스페어의 크기가 작아지는 반면 BMA의 농도가 증가하면 마이크로스페어의 입자크기가 증가하였다.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.147-156
• /
• 1989

The effects of starting composition, sintering temperature and porosity on the mechanical properties of hydroxyapatite ceramics were investigated. The hydroxyapatite powder were prepared by precipitation method using Ca(NO3)2.4H2O and (NH4)2.HPO4. The obtained powders were Ca-deficient hydroxyapatites and as the Ca/P mole ration in the initial solution was increased, the particle size of the precipitates was decreased, and the decomposition of hydroxyapatite to $\beta$-TCP was controlled. The porosity, as well as Ca/P mole ratio in starting composition and sintering temperature, plays major role in the mechanical properties of dense hydroxyapatite ceramics.