• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.3
• /
• pp.281-287
• /
• 1995

A study was conducted to investigate the effect of different inclusion levels of urea treated whole-crop wheat silage (UWCWS) in grass silage based rations on the performance of growing beef cattle. The winter wheat (variety, Riband) was harvested (in the summer of 1991) at a dry matter proportion of 520 g/kg and treated with feed grade urea at the rate of 37 kg/tonne crop dry matter and preserved in a heavy duty plastic bag using a silo press. The urea treated whole crop wheat silage (UWCWS) was mixed with grass silage to replace 0.00 (S100), 0.33 (S33) and 0.67 (S67) parts of the forage dry matter and fed ad libitum in a cross over design to 18 Simmental X Holstein Friesian growing beef animals. Two energy sources {one high in starch, rolled barley (RB) and one high in digestible fibre, sugar beet pulp (SBP)} were fed to supply sufficient energy for the efficient use of nitrogen by the rumen micro-organisms. The data on DMIF (dry matter intake of forage), TDMI (total dry matter intake), DLWG (daily live weight gain), FCR (feed conversion ratio) were recorded and faecal samples were collected to determine the digestibility coefficients. Results revealed that with the inclusion of UWCW in the animals' diets the DMI of the forage was significantly increased (p < 0.05). The highest DMIF was found in the treatment "S33" ($6.28{\pm}0.25kg$) where 67% of the silage dry matter was replaced with the UWCW and the lowest value for DMIF was observed in the control treatment ($5.03{\pm}0.23kg$). The DLWG did not differ significantly between the treatments. However, treatment "S100" showed a trend towards a superior DLWG. Feed conversion ratio in the control treatment differed significantly from "S67" and "S33". The addition of the UWCW in the animals' diet resulted in the lower FCR There was no effect of type of energy supplement on any aspect of performance either overall or in interaction with grass silage: UWCWS ratio. The regression and correlation coefficients for DMIF (r = 5.22 + 0.0184x*), DLWG (r = $1.04-0.00086x^{NS}$) and FCR (r = 4.78 = 0.022x*) on the inclusion of UWCW in the diet were calculated. The effect of the inclusion of UWCW on the overall digestibility coefficients was significant (p < 0.05). The addition of the UWCWS in the diet decreased the digestibility of the DM, OM, ADF and NFE but effect on the protein digestibility was non significant. The results of present study suggests that a DLWG slightly over 1 kg can be achieved with UWCW during the store period (period in which animal performance targets are low especially during winter) and the prediction of ME was overestimated as the high intake of DM did not reflect in improved animal performance.

• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.79-85
• /
• 1984

The ionic association constant(K) of 2,4,6, N-tetramethyl pyridinium iodide (TeMPI) in 95 volume percentage ethanol-water mixture were determined by a modified UV and conductance method at $25^{\circ}C$ to $50^{\circ}C$ under 1 to 2,000 bars. The K values increase with increasing pressure and have maximum value at $40^{\circ}C$. The partial molar volume hange (${\Delta}V$) has relatively small negative value and the absolute values of ${\Delta}$ are minimum at $40^{\circ}C$. The ion size parameter(a) of TeMPI have maximum value at $40^{\circ}C$. {\Delta}H^{\circ}$ values are zero, positive and negative at 40^{\circ}C$, $25^{\circ}C$ and $50^{\circ}C$ respectively. Other thermodynamic parameters such as the changes of standard entropy ({\Delta}S^{\circ}$) and free energy {\Delta}G^{\circ}$ were evaluated. From these experimental results, we came to conclusion that TeMPI is stabilized by the elevation of pressure and that of temperature below $40^{\circ}C$ but weakly dimerized at $40^{\circ}C$ because of the intermolecular hydrophobic interaction of eight methyl groups of two molecules. And it thermally decomposed above $50^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.331-347
• /
• 2020

In the modern economic area of service-based logic, the importance of the service industry continues to increase. Yet in spite of the various promotional policies of the government, growth remains at a standstill. It is now time to turn away from the outwardly visible form of the issue and to contemplate its root cause. This study thus investigated the service essentials based on philosophical thought in order to secure the continuous growth and competitive advantage of a service industry with an unshakable foundation. The effect of service essentials on job performance by service industry was also empirically analyzed. To conduct the study, a research hypothesis was verified by using the final 900 copies of survey data for service industry workers for data analysis. The results of the study on service essentials showed that interaction and harmony were found to have a positive effect on job performance in the transportation industry, while it verified the positive effects on job performance for interactivity and horizontality in the finance and insurance industry, and interactivity, horizontality and harmony in the hotel and resort industries. As a result, it was confirmed that service essentials had a partial effect on performance in the service industry. Various and in-depth studies on service essentials are thus required in the future, and it is also necessary to expand the parameters or adjustment variables that are capable of affecting performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.1
• /
• pp.24-29
• /
• 1984

Seedling yield of panax ginseng depended on soil water in a modified Yang-jig seedbed with rice hull mulch and peat application which increased soil water content. Water dependency tended to increase with the increase of potassium in soil. Effect of potassium on water dependency seemed to be constant in certain range of soil water which might be the optimum water for seedling growth. Partial correlation coefficient between seedling yield and water was significant in relation to organic matter (OM), Mg and Ca. The best multiple regression of seedling yield was with $H_2O$, K and Ca. Available phosphorus (P) in soil increased with low level of peat but decreased with high level or with mulching. There was interaction between mulching and peat for P. There was significant linear relation between two of pH, $H_2O$, Ca, Mg, K, OM except between K and $H_2O$ or pH. Ammonium nitrogen negatively correlated with Mg Quadratic relation held between $NO_3-N$ and K or $NH_4-N$ and between P and K+Ca+Mg. Quadratic relation was more significant than linearity between soil factors. Mulching increased stem length. Leaf area index ranged from 1.06 to 1.67. Leaf area per plant ranged $16.0-18.8cm^2$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.217-222
• /
• 1985

The yield responses of three isogenic lines in plant type of paddy rice(open-, spread- and broom-type) as affected by combined treatments of transplanting densities (47.62, 22.22, 15.15, 11.11 and 8.33 hills per sq. meter) and rates of fertilizer application (0, 0.5, 1.0 and 1.5 folds of standard rate) were studied by using of the partial differentiations by planting density(D):df(D,F)/dD, fertilizer rate(F):df(D,F)/dF, and their interaction(DXF):d$^2$ f(D,F)/dDdF from the multiple regression polynominal equations. Under the condition of wider planting, the broom-type showed most prominent and sensitive responses in yield among others. Also the action of transplanting density in the broom-type were positive both at lower and higher densities. Under the lower densities, the broom-type represented positive actions both at lower and higher rates of fertilizer application. Whereas the interactions between the density and fertilizer rate under the lower densities were rather negative. To achieve the labor-saving by lower transplanting density(11-14 hills per sq. meter), the amount of fertilizer rates were estimated as 1.3-1.5 folds much of the standard in the open-type, whereas more than 1.5 folds in the broom-type. Thus, the potentials to absorb more amounts of fertilizer may explain the compensating function of the broom-type for equivalent yields of the standards at reduced transplanting densities.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.125-130
• /
• 1995

Observations on the seedling growth of red pepper responding to different temperature(10, 20, 3$0^{\circ}C$) and light intensity(5, 15, 25 klux) were made in the growth Chamber during 7 weeks. The results obtained were as follows; 1. Best results of the combinations of temperature and light intensity were obtained from the combinated treatment of 3$0^{\circ}C$ and 25klux. At all of the temperature levels in this experiment, the more the light intensity is high, the more the growth is favor, but at low temperature below 2$0^{\circ}C$ and low light intensity below 15 klux, the growth of red pepper seedlings was decreased markedly. 2. Multiple regression polynomial equations of the characteristics of red pepper seedlings grown in the different combinations of temperature and light intensity fitted well in the plant height, number of leaves, leaf area, stem dry weight and shoot dry weight. 3. Multiple regression polynomial equation to the shoot dry weight was partial differentiated and diagrammatized the response surface using its theoretical value. Light intensity affected more to the shoot dry weight in the temperature below 2$0^{\circ}C$ but above 2$0^{\circ}C$ the role of the temperature showed greatly influence however, interaction effects of light intensity and temperature showed strongly.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.737-747
• /
• 2005

The connection of the slab with the steel beam and thus, the transmission of shear force at the interface of the steel-concrete composite beams is achieved with shear connectors, in general, with shear studs. The composite action through these shear studs has a significant influence on the load carrying behavior of the composite beams. The load carrying capacity of studs is determined through push-out tests. At present, the transferability of this load carrying capacity of studs to composite beams, especially in cases of partial interaction, is being questioned by experimental and theoretical investigations. In this study, a finite element model for the simulation of the behavior of the standard push-out specimen and the composite beams without the implementation of the load-slip curve of the stud connectors from the push-out test is developed. The load carrying behavior of the studs in the composite beams is estimated and compared with the results of the push-out test. The reason for the difference in the load carrying behavior of the studs in the push-out test specimen and in the composite beams is found.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.715-725
• /
• 1995

This study was done for identifying the factors which affect psychologic symptoms of low back(LBP) patients. The study subjects were 43 work-related low back pain patients, 28 work-related non-low back pain patients and 47 general low back injury patients. The study materialis SCL 90-R for checking psychologic symptoms and questionnaire for obtaining general information about the subjects. The data were analyzed by model of analysis of covariance adjusted by several variables such as gender, age, education and marital status and then compared the least square means of symptom score between groups. To identify the factors that affect psychologic symptom, duration of suspension, return to work and interaction factor of these two variables were analyzed by multivariate model and we calcuated partial correlation coefficient of these variables. As a result, work-related LBP patients showed higher score of symptoms in somatization, depression and psychosis than work-related non-LBP and non-work-related LBP. Duration of suspension and return to work were significant explanatory variables for psychologic symptom score of work-related LBP. Then, we may conclude that the treatment and rehabilitation programe for work-related LBP should cover the strategy of early return to work.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.337-365
• /
• 2015

The objective of this study proposes the new user's addiction model in 'Social Network Games' (SNGs). Research model is derived from the separation of two characteristics. First one is logical characteristics that includes 'Functional' (F), 'Keystroke' (K), and 'Goal' (G). Second one is feeling characteristics that consists a few factors such as 'Emotion' (E), 'Social' (S), and 'Affection' (A). For the pre-test, a total of 30 participants responded to survey in order to inspect the fitness of research questionnaire, roughly validity of the proposed model, and the direction of this reseach. After that for the main test, a total 300 users participated in this research. The final number of effective participants were 261 because 39 were insincere respondents and without playing SNGs who were excluded. Then we examined the measurement model by performing 'Partial Least Squares - Structural Equation Modeling' (PLS-SEM) analysis to test the research hypothesis empirically. The results of the measurement and structural model test lend support to the proposed research model by providing a good fit to the construct data. Interestingly, the model showed the significant effects of the interaction between eleven hypothesis(H1,H2,H3,H4,H5,H6,H7,H8,H9,H10, H12). Only one hypothesis decision t-value not supported that is involved the relationship between SNGs Addiction and Keystroke, H11(1.193). This research expect to contributes to an exploratory SNGs research to clarify the base of addition and will aids understanding of users' behavior associated with SNGs development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4048-4057
• /
• 2013

In the composite beam subjected to the hogging moment it is very difficult to evaluate the influence of the reduction of slab stiffness due to cracks and their development on the horizontal shear behavior of shear connection. In this study, a 3D FE model is developed by which one can analyze the composite action in the composite beam subjected to the hogging moment. In this FE model, each structural member and shear connection are modeled as similar as possible to details of the composite beam. Bending behaviour, and composite action which could not be analyzed using the existing 1D or 2D FE model are investigated by the 3D model. Analysis results show that the reinforcement ratio and crack behaviour of the slab are main factors which exert a strong influence on the composite action. According to the analysis results about load-slip behavior, initial crack of slab and yielding of rebars have a influence on the slip stiffness of shear connection. The existing experimental results, that the design of partial interaction can be more efficient in designing of shear connection of the composite beams, are indirectly verified by the FE analysis.