• 한국광물학회지
• /
• 제16권2호
• /
• pp.161-169
• /
• 2003

한성 비정질 투휘석$(Ca,Mg)SiO_3$에 대한 상변이 연구를 압력은 다이아몬드앤빌기기를 이용하여 ∼30 GPa까지, 온도는 약(YAG) 레이저 가열기기를 이용하여 ∼$1000^{\circ}C$에서 조사(scanning)하여 시행하였다. 비정질 투휘석은 고온-고압 하에서 곧바로 등축정계에 속하는 단상의 $(Ca,Mg)SiO_3$페롭스카이트 결정구조로 상변이 하였다. 이러한 결과는 고온-고압 하에서 사방정계에 속하는 $MgSiO_3$페롭스카이트 상과 등축정계에 속하는 $CaSiO_3$페롭스카이트 상으로 분리되는 상변이를 하는 결정질 투휘석의 상변이 계통과는 큰 차이를 보이고 있다. 이러한 차이는 출발시료의 차이점이나 특히 온도가 상변이에 큰 영향인자로 작용하여 기인한 것으로 판단된다. 이러한 강변이 관계는 맨틀의 온도, 압력 및 산소분압 차이 등에 의해 맨틀전이대나 하부맨틀을 구성하는 광물상의 조합에 영향을 줄 수 있다.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.8-14
• /
• 2010

Fuel processing systems which convert fuel into rich gas (such as stream reforming, partial oxidation, autothermal reforming) need high temperature environment ($600{\sim}1,000^{\circ}$). Generally, anode-off gas or mixture of anode-off gas and LNG is used as input gas of fuel reformer. In order to make efficient and low emission burner system for fuel reformer, it is necessary to elucidate the combustion and emission characteristic of fuel reformer burner. The purpose of this study is to develop a porous premixed flat ceramic burner that can be used for 1~5 kW fuel cell reformer. Ceramic burner experiments using natural gas, hydrogen gas, anode off gas, mixture of natural gas & anode off gas were carried out respectively to investigate the flame characteristics by heating capacity and equivalence ratio. Results show that the stable flat flames can be established for natural gas, hydrogen gas, anode off gas and mixture of natural gas & anode off gas as reformer fuel in the porous ceramic burner. For all of fuels, their burning velocities become smaller as the equivalence ratio goes to the lean mixture ratio, and a lift-off occurs at lean limit. Flame length in hydrogen and anode off gas became longer with increasing the heat capacity. In particular, the blue surface flame is found to be very stable at a very lean equivalence ratio at heat capacity and different fuels. The exhausted NOx and CO measurement shows that the blue surface flame represents the lowest NOx and CO emissions since it remains very stable at a lean equivalence ratio.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.41-51
• /
• 2016

A solar air heater was designed for supplementary domestic heating. The absorber plate had a series of protruding notches which had triangular openings on the front surface of the absorber plate to direct partial air flow to the rear surface and to enhance the convective heat transfer to the flowing air. The height of the opening as well as the opening configuration was determined by preceding numerical simulations. The experimental model had an absorber plate of 0.78-m width and 1.0-m length which was coated with black paint. The air temperature increased as much as $18^{\circ}C$ for $90-m^3/h$ flow rate when the absorber plate was inclined by $45^{\circ}$ for a clear-day solar irradiation of about $906W/m^2$. The collector efficiency ranged from 69 to 74%. Considering the simplicity of the structure and low manufacturing cost, the solar air heater might have competence as an auxiliary heating device for domestic use. On-site experimental results are presented with discussion for various solar irradiations and air flow conditions.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.443-454
• /
• 2020

In recent years, many studies have been done on the performance of concrete containing glass powder (GP). For the purpose of widespread use of GP in concrete mixes, a knowledge of the performance of such a mixture after a fire is essential for the perspective of structural use. This research work was carried out to evaluate the performance of High Performance Concrete (HPC) made with GP after being exposed to elevated temperature. The studied mixtures include partial replacement of cement by GP with up to 30%. The mechanical performance and structural alterations were assessed after high temperature treatment from 200℃ to 800℃. The mechanical performance was evaluated by testing the specimens to the compressive and tensile strength. In addition, the mass loss and the porosity were measured to notice the structural alterations. Changes in microstructure due to temperature was also investigated by the X-ray diffraction (XRD) and thermal gravimetric analyses (TGA) as well as porosity adsorption tests. The results of the concrete strength tests showed a slight difference in compressive strength and the same tensile strength performance when replacing a part of the cement by GP. However, after high temperature exposition, concrete with GP showed better performance than the reference concrete for temperature below 600℃. But, after heating at 800℃, the strength of the concrete with GP drop slightly more than reference concrete. This is accompanied by an important increase in mass loss and water porosity. After the microstructure analysis, no important changes happened differently for concrete with GP at high temperature except a new calcium silica form appears after the 800℃ heating.

• 한국식품과학회지
• /
• 제20권4호
• /
• pp.618-624
• /
• 1988

대체 전분과 hydrocolloids(xanthan gum과 locust bean gum의 혼합물)첨가에 따른 조전분 및 녹두묵의 특징을 평가하기 위해 DSC와 amylograph를 이용하여 전분의 호화양상을 측정하였고, 관능검사 및 IUTM 측정을 통해 묵의 텍스쳐 특성을 조사하였다. 상 전이 엔탈피는 녹두-가교 혼합 전분이 녹두-비 변성혼합 전분보다 녹두 조전분에 더 유사하제 나타났다. Hydrocolloids 첨가는 초기점도 증가에는 크게 영향을 미치지 않았으나 온도가 높아지면서 점도를 현저하게 증가시켰다. $50^{\circ}C$까지 냉각한 후의 점도는 가교혼합 전분과 녹두 조전분이 유사하게 나타났다. 관능검사의 삼점검사 결과에서는 표준묵과의 차이를 감지하지 못하는 농도가 가교전분에서 더 높았다. 또한 혼합전분 사용시 녹두묵의 단단한 정도와 응집력이 hydrocolloids첨가시 그 차이를 감소시키는 것으로 나타났다. IUTM 측정결과, 변형도에 따라 받는 힘의 크기가 다른 것을 알 수 있으며 90% 변형에서 나타난 단단한 정도는 관능검사의 결과와 유사한 경향을 나타냈다. 따라서 본 실험과 같은 조건하에서는 녹두묵 제조시 hydrocolloids를 첨가함으로써 대체 전분의 이용가능성을 더 증가시킬 수 있다고 생각된다.

• 한국농촌건축학회논문집
• /
• 제18권2호
• /
• pp.29-37
• /
• 2016

This study is aimed to suggesting a hypothesis about the process of improvement of houses of the Korean-Chinese, comparing how Han Chinese and Korean-Chinese houses changed in Yanbian Area of China. This draws the conclusion by analyzing the field survey about residence of the Han Chinese and the Korean-Chinese in Yanbian Area of China. First of all, the characteristic of residence style change and the plan of rural houses of the Han Chinese are in the following. The plan of houses has been changed from allocating rooms from side to side with the kitchen as the center to linking each functional spaces through the aisle. And the main bedroom of houses becomes the central space for family members instead of Kang (partial Ondol) by expanding the floor heating system under the whole floor in houses. Next, the feature of residence style changes of the Han Chinese and the Korean-Chinese is as follows. In 1970s barns disappeared from houses of the Korean Chinese, but houses of the Han Chinese were not much changed. From 1980s to 1990s, spaces linking each rooms with aisles had appeared for comfortableness of residence and respecting each individual's privacy. On the other hand, The houses of the Korean-Chinese make a whole big space by getting rid of walls between the rooms. And after 2 thousand years later, Han Chinese houses have a bedroom with floor heating system. Both houses of the Korean-Chinese and the Han Chinese are changed to have a residence style which taking sedentary style and standing style.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2181-2185
• /
• 2008

Fuel processing systems which convert HC fuel into $H_2$ rich gas (such as stream reforming, partial oxidation, auto-thermal reforming) need high temperature environment($600-1000^{\circ}C$). Generally, anode-off gas or mixture of anode-off gas and LNG is used as input gas of fuel reformer. In order to make efficient and low emission burner system for fuel reformer, it is necessary to elucidate the combustion and emission characteristic of fuel reformer burner. The purpose of this study is to develop a porous premixed flat ceramic burner that can be used for 1-5kW fuel cell reformer. Ceramic burner experiments using natural gas, hydrogen gas, anode off gas were carried out respectively to investigate the flame characteristics by heating capacity and equivalence ratio. Results show that the stable flat flames can be established for natural gas, hydrogen gas, anode off gas and mixture of natural & anode off gas as reformer fuel. For all of fuels, their burning velocities become smaller as the equivalence ratio goes to the lean mixture ratio, and a lift-off occurs at lean limit. Flame length in hydrogen and anode off gas became longer with increasing the heat capacity.

• 한국연소학회지
• /
• 제22권4호
• /
• pp.19-26
• /
• 2017

This study investigates the gasification of coal char by $CO_2$ under high pressures in a drop tube furnace(DTF). The rate constants are derived for the shrinking core model using the conventional method based on the set reactor conditions. The computational fluid dynamic(CFD) simulations adopting the rate constants revealed that the carbon conversion was much slower than the experimental results, especially under high temperature and high partial pressure of reactants. Three reasons were identified for the discrepancy: i) shorter reaction time because of the entry region for heating, ii) lower particle temperature by the endothermic reaction, and iii) lower partial pressure of $CO_2$ by its consumption. Therefore, the rate constants were corrected based on the actual reaction conditions of the char. The CFD results updated using the corrected rate constants well matched with the measured values. Such correction of reaction conditions in a DTF is essential in deriving rate constants for any char conversion models by $H_2O$ and $O_2$ as well as $CO_2$.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.111-118
• /
• 2017

Performance factors such as the EER(Energy Efficiency Ratio) and the COP (Coefficient of Performance) are being replaced by seasonal energy efficiency factors, like the SEER (Seasonal EER) and the SCOP (Seasonal COP) to evaluate the performance of a heat pump by the time of the year. Seasonal performance factors, such as the CSPF (Cooling Seasonal Performance Factor) and the HSPF (Heating Seasonal Performance Factor) are used to describe the heat pump's performance during the cool and hot seasons. In this study, the optimization of all heat pump's operating parameters was experimentally conducted to enhance the SEER based on the EU standard (EN 14825). Moreover, the SEER was improved by the compressor frequency, as well as indoor and outdoor fan speeds. In addition, the performance characteristics of the heat pump were studied under partial load conditions. As a result, the SEER was enhanced by 17% when the compressor frequency was optimized. An additional 2% improvement was achievable with the optimization of indoor and outdoor fan speeds.

• 교육시설
• /
• 제13권4호
• /
• pp.15-23
• /
• 2006

The purpose of this study is to establish the objective deterioration grades and evaluation criteria of building equipment system of educational facilities available for reasonable maintenance and remodeling of them. For the purpose of it, the actual conditions of building equipment systems of the 148 buildings of 84 middle and high schools in Seoul 20 years after construction are investigated and surveyed through one-on-one interviews and questionnaires. And, deterioration grades of them are estimated by the evaluation criteria which is proposed in this study. As a result of this study, the 10 deterioration grades and the 4 evaluation criteria of the 6 performances of building equipment system, which are heating and cooling, water supply and drainage, hot water supply and electrical power performance, are suggested. And, as a result of the survey, it showed that 24% of the investigated school buildings were estimated C grade which needs partial remodelling, and 51% of the school buildings were estimated D grade which needs extensive remodelling. And, 25% of the school buildings were estimated E grade which needs overall remodelling or alteration of building equipment system.