• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.574-581
• /
• 2000

A vertically-walled auto-body part is one of the most difficult stamping parts because of angle change, wall curl, and twisting of the blank after springback as well as fracture and wrinkle. In this study, computational simulations of the vertically-walled auto-body part are carried out focusing on angle change, wall curl, and twisting after springback. Binderwrap blank shape is used in forming analysis for precise initial contacts between punch and blank. An adaptive mesh method is used in springback analysis for precise calculation of bending moments. In springback analysis, the differences of 2 and 3 dimensional analysis are compared and the effects of blank holdig force and friction coefficient are evaluated. In order to verify the validity of simulation results, they are compared with measured ones. The predicted thickness distribution and formed shape are agreed well with those of the measurement. The Predicted springback amount is less than that of the measurement.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.421-431
• /
• 2005

This paper introduces a new approach for saving build time of hybrid rapid prototyping by decomposing a part into minimum number of layers. In the hybrid rapid prototyping, a part of a complicated shape is realized by adding layers of a simpler shape, each of which is obtained by machining a sheet of constant thickness from its top and bottom surfaces. Thus it is desired to decompose a given part into the minimum number of layers while guaranteeing each layer to be fabricated from the given sheets using a 3-axis milling machine. To satisfy these requirements, a concave edge-based algorithm is proposed to decompose a part into layers by considering the tool accessibility, the total number of layers, and the allowable sheet thickness.

• Journal of the Korean Society of Costume
• /
• v.40
• /
• pp.95-107
• /
• 1998

The purpose of this research paper is to offer basic data for cloth design which is intended to apply appropriate shape and catacity to cloth. Followings are the analyzed result of investigation which was conducted to figure out the character of middle aged from 35 to 59 years old-women body especially in lower half of their body. 177 women took part in this investigation. 1. As a result of analyzed characters for middle aged women body shape, taking a side view of body, there are great variance in thickness coefficient which indicates the size of body. 2. According to a comparison result of early middle aged women body shape with late middle aged women body shape, the value in height items get shorter otherwise the value in thickness items get longer getting older. It means late middle aged women are relatively fat. 3. For the analysis of women body especially in lower half, 8 factors were used. They are as followings. Factor 1. Side thickness of lower half. Factor 2. Width of lower half. Factor 3. Height of lower half Factor 4. Droop of underbelly Factor 5. Salient rate of buttocks. Factor 6. Length of buttocks. Factor 7. Salient rate of underbelly. Factor 8. Droop of buttocks 4. Lower half shapes of middle aged women were divided into three groups and the character of each group are as followings. 〈Group 1〉65.0% of women who took part in this investigation have this type of body shape. They have long value in height items and thickness items. 〈Group 2〉16.4% of women who take part in this investigation were belonged to this group. The value in height items were not so different from group 1 but the thickness value are shorter than group 1. Women of group 2 have slime body shape. 〈Group 3〉18.6% of women were belonged to group 3. They show the shortest value in height items otherwise the longest value in thickness items. Therefore they are the smallest and the fattest group in this investigation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2011

When a vehicle passes through a turnout, it is necessary for the changes in lateral force to be minimized to ensure the safe running of the vehicle. Therefore, the analysis of the interaction between the vehicle and the turnout is crucial for estimating the lateral force and the derailment coefficient on the turnout. In this paper, the effect of the variation of section shape on the running safety of a vehicle was investigated by changing the shape of the point part and the crossing part. The tongue rail length of the point part and nose rail height of the crossing part of an F10/F12 turnout were changed, and the running safety of the vehicle was analyzed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.4
• /
• pp.138-148
• /
• 2024

Multi-resonance wave energy converter can generate efficient power generation by complexly utilizing the resonance phenomenon of waves even when waves propagate normally. As the wave is amplified by resonance, the power generation efficiency of the multi-resonance wave energy converter increases, and the shape of the resonance part needs to be optimized to maximize power generation efficiency. The multi-resonance wave energy converter amplifies waves in the seiche resonance part and the channel resonance part. In this study, CFD numerical experiments were performed under various conditions such as the length and location of the channel resonance part to analyze the sensitivity for each condition and derve the optimal shape of the channel resonance part.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.273-282
• /
• 2011

The ultrastructural characteristics of germ cells during spermatogenesis and mature sperm morphology in male Pinctada martensii were investigated by transmission electron microscope observation. The morphologies of the sperm nucleus and the acrosome of this species are the oval shape and cone shape, respectively. Spermatozoa are approximately $47-50{\mu}m$ in length including a sperm nucleus (about $1.24{\mu}m$ in length), an acrosome (about $0.60{\mu}m$ in length), and tail flagellum (about $45-47{\mu}m$). The axoneme of the sperm tail shows a 9+2 structure. In P. martensii in Pteriidae, a special substructure showing a thick and wide triangular shape which is composed of electron-dense opaque material (occupied about 50% of all, the upper part of the acrosomal vesicle), appeared in the upper region (part) of the acrosomal vesicle, while the lower region (part) of the acrosomal vesicle is composed of electron-lucent material. Thus, this special structure, which exist in the upper part of the acrosomal vesicle in P. martensii, is somewhat different from those of other subacrosomal vesicle in other families in subacrosomal vesicles. Therefore, we assume that the existence of a special substructure showing a thick and wide triangular shape in the acrosomal vesicle of the spermatozoon can be used as a key characteristic for identification of P. martensii or other species in Pteriidae in subclass Pteriomorphia. The number of mitochondria in the midpiece of the sperm of this species are five (exceptionally sometimes four), as one of common characteristics appear the same number of mitochondria in the same families of superfamilyies. This species in Pteriidae does not contain the axial rod and satellite fibres which appear in the species in Ostreidae in subclass Pteriomorphia. These characteristics can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1078-1083
• /
• 1992

Extracting the process planning information from the CAD data is the key issue in integrated CAD/CAM system. In this paper, we develop algorithms for extracting the shape and setup configuration for NC machining of prismatic parts. In determining the workpart shape, the minimum-enclosing condept is applied so that the material waste is minimized. To minimize the number of setups, feature based algorithm is developed considrint the part shape, tool shape, and tool approach direction. The validity and effectiveness of the developed algorithms were tested by computer simulations.

• Clean Technology
• /
• v.20 no.3
• /
• pp.226-231
• /
• 2014

This study presents a micromolding for the synthesis of Janus particles with reconfigurable shape by pH stimuli. First, we use acrylic acid (AA) as pH responsive monomer in the hydrophilic part and trimethylolpropane triacylate (TMPTA) in the hydrophobic part, respectively. The change of acidity in solvent induces the swelling of hydrophilic part in the Janus particles. The pH-responsive Janus particles show different swelling ratio of hydrophilic part in according to composition of acrylic acid in diverse range (0-70% v/v) and pH (3-11). As the concentration of acrylic acid in the hydrophilic part and environmental pH increase, the hydrophilic part in the Janus particles is proportionally swelled. Second, we fabricate novel type of Janus particles with two different hydrophilicities. As a proof of concept, we have applied acrylic acid (AA) and 2-(dimethylamino)ethyl methacrylate (DAEMA) into each part because the monomers provide reverse responsive activity. As expected, these Janus particles show different shape anisotropies with reconfigurable property in accordance with the polarity of each part at same acidity of environmental solvent. We envision that the stimuli responsive Janus particles have a wide application from fundamental science to diagnostic apparatus.

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.840-849
• /
• 2006

Breast volume has been approximately estimated under the assumption that the shape of breast is a corn. However, women's breast is more like a bulged bag in reality. In this paper, three methods of breast volume estimation were compared to find out the more accurate method. The shape of the breast is assumed as a hemisphere in the first estimation method and a corn in the second one. In the third method, arc along the cross sectional shape of breast was utilized in the calculation. Comparisons among the methods were made using the actual 3D volume measurement of thirty seven women's breast. As results, the third method was the best one for the normal breast type, especially for the lower part of the breast ($R^2=0.74$) which is the crucial design parameter of the brassiere. Assumption of the shape of breast as a corn was reasonably acceptable when the breast is sagged. It was expected that when women wore brassiere, the accuracy of the third method would increase more, since the shape of breast becomes more symmetrical.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.124-135
• /
• 2007

To understand tendency of body shapes of Chinese women who reside in Beijing and Shanghai for improving the match of exported clothes to China, this categorizes the bodies by extracting the elements of the objects and understanding body promotion. To categorize the subject by not size factor but form factor, data were compared and analyzed mainly with index based on measurement of the body. This selected specimen as 1381 of Chinese women from 19 to 50 selected in random sampling in Shanghai and Beijing from 23th, June to 7th August in 2004. 1. Chinese women is generally separated in 7.09 parts and upper body including waist shapes round. 2. The elements indicating the women's physical properties are obesity, the size of upper part, front shape, side shape, shoulder and back shape, perpendicular size and lower part length, body shape. 3. The Chinese are categorized by three factors. Normal shape which is not both fat and skinny, records the highest in the ranking.