• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.7-12
• /
• 2007

Friction welding is a welding method to use frictional heat of a couple of materials. In this paper object is that design the welding part shape with the flow gallery part which there is no effect in flow. Decided the welding part design parameter and doing the friction welding analysis used the rigid-plastic FEM program DEFORM-2D. To do friction welding analysis must input necessary flow stress data, friction coefficient by temperature change, upset pressure and Revolution per minute etc. According to analysis result, it decided the optimal shape of welding part with no effect in flow.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.483-491
• /
• 2008

The filtration characteristics of $CYBAGFILTER^{(R)}$ unit with pleated filter bags were evaluated by comparing the performance of the unit with the lower part of cyclone shape with that of the unit with conventional lower part. Results from the test were also compared with those from the previous research with the $CYBAGFILTER^{(R)}$ in which round filter bags were installed. $CYBAGFILTER^{(R)}$ is the unit which combines the centrifugal separation mechanism and the fabric filtration mechanism in a single unit for efficient removal of particulate matters. The pleated filter bags are made of pleated fabric with an extension of the filtration area about 3 times compared with the conventional round filter bags. The results from the test using pleated filter bags showed an overall collection efficiency of over 99.9% regardless of the shape of lower part installed. When the lower part of cyclone shape was installed, the filter cleaning interval was over 2 times longer compared with that when the conventional lower part was installed. At the same conditions of filtration velocity and filter pressure drop, the $CYBAGFILTER^{(R)}$ with the lower part of cyclone shape, in which the pleated filter bags are installed, can be operated with a flow rate of round 3 times higher than that with conventional round filter bags.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.465-473
• /
• 2008

Type II compressed natural gas(CNG) storage vessels for automobiles have been acknowledged for their excellence and have recently become established in local regions. Their supply is not only to automakers in Korea such as Hyundai Motors but they are being increasingly exported. Although the available products have undergone safety evaluations and are certified by an authorized institution they are still short of the optimal design that is possible for such storage vessels. This research investigates the shape and thickness of the dome with the aim of optimizing the type II CNG storage vessels by using a finite element analysis technique. CNG storage vessels can be largely divided into 3 parts namely, the hear part, the cylinder part and the dome part. The head part is designed by means of a hot spinning process and this method is safer than that used in the design of the dome part even though its shape is similar. The thickness of the liners and reinforcing materials was optimized based on the requirements of the cylinder and dome parts. In addition, the shape of the dome, which is most suitable for Type II CNG storage vessels, is proposed by a process of review and analysis of various existing shape, and then conducting a structural stability evaluation to ensure the optimal design plan.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.34-38
• /
• 2012

Test work is the press die branch at The Korea-China-Japan Grand Prize Contest. This study focuses on strip layout design for test work. A comparison is drawn between product shape and blank deployment line. During the forming analysis of the whole product, shape part of the total forming process is analyzed. As for forming part and flange deployment, forming analysis is carried out in part during the mid process. Material utilization is 42.6 percent and strip layout design is completed in 14 processes that are comprised of hourglass, slotting, embossing, drawing and trimming.

• Research in Mathematical Education
• /
• v.14 no.3
• /
• pp.219-231
• /
• 2010

Mathematically, a proof is to create a convincing argument through logical reasoning towards a given proposition or a given statement. Mathematics educators have been working diligently to create environments that will assist students to perform proofs. One of such environments is the use of dynamic-geometry-software in the classroom. This paper reports on a case study and intends to probe into students' own thinking, patterns they used in completing certain tasks, and the extent to which they have utilized technology. Their tasks were to explore the shape-to-shape, shape-to-part, and part-to-part interrelationships of geometric objects when dealing with certain geometric problem-solving situations utilizing dissection-motion-operation (DMO).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.267-271
• /
• 2000

A part definition must not only provide shape information of a nominal part but also contain non-shape information such as tolerances, surface roughness and material attributes. Although machining features are useful for suitable shape information for process reasoning in the CAPP, they need to be integrated with tolerance information for effective process planning. We develop the tolerance modeler that efficiently integrates machining features with tolerance information for feature-based CAPP It is based on the association of machining features, tolerance features. and tolerances Tolerance features, where tolerances are assigned, are classified into two types; one is the face that is a topological entity on a solid model and the other is the functional geometry that is not referenced to topological entities. The functional geometry is represented by using machining features All the data for representing tolerance information with machining features are stored completely and unambiguously in the independent tolerance structure. The developed tolerance modeler is implemented as a module of a comprehensive feature-based CAPP system.

• Journal of the Korean Society of Costume
• /
• v.11
• /
• pp.5-30
• /
• 1987

This thesis attempts to contribute to analyze the methods of pattern grading which is in common fashion in America and Japan and to make the foundation for the basic technique of pattern grading fitting to Korean body shape. There are two types in pattern grading. The results are as follows: 1) The pattern grading according to body shape contains A, B, C, D, F, and G. A is suitable for the bulging part of a body and F is the most suitable for the general part of a body. 2) The pattern grading not depending on body shape has no relation to the quantity of grading in the size of a body but includes silhouettes or design details. The standards of its methods are as follows: a) by the part of body b) by the balance of whole pattern c) by adjusting to the mutual balance of besign details.

• Korean Journal of Mathematics
• /
• v.25 no.3
• /
• pp.405-435
• /
• 2017

We deal with a sensitivity analysis of an optimal shape control problem for the stationary Navier-Stokes system. A two-dimensional channel flow of an incompressible, viscous fluid is examined to determine the shape of a bump on a part of the boundary that minimizes the viscous drag. By using the material derivative method and adjoint variables for a shape sensitivity analysis, we derive the shape gradient of the design functional for the model problem.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.16-22
• /
• 1996

Two kinds of blank shapes, optimum and square, are adopted to investigate formbility. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose , rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup detph and strain distribution are measured experimetally for the products of the two kinds of blank shapes, which are optimum and square.It is confirmed that deeper cup without severe thickness reduction can be obtained fro the optimum shape.

• Smart Structures and Systems
• /
• v.7 no.5
• /
• pp.417-432
• /
• 2011

The present paper is devoted to vibration canceling and shape control of piezoelastic slender beams. Taking into account the presence of electric networks, an extended electromechanically coupled Bernoulli-Euler beam theory for passive piezoelectric composite structures is shortly introduced in the first part of our contribution. The second part of the paper deals with the concept of passive shape control of beams using shaped piezoelectric layers and tuned inductive networks. It is shown that an impedance matching and a shaping condition must be fulfilled in order to perfectly cancel vibrations due to an arbitrary harmonic load for a specific frequency. As a main result of the present paper, the correctness of the theory of passive shape control is demonstrated for a harmonically excited piezoelelastic cantilever by a finite element calculation based on one-dimensional Bernoulli-Euler beam elements, as well as by the commercial finite element code of ANSYS using three-dimensional solid elements. Finally, an outlook for the practical importance of the passive shape control concept is given: It is shown that harmonic vibrations of a beam with properly shaped layers according to the presented passive shape control theory, which are attached to an resistor-inductive circuit (RL-circuit), can be significantly reduced over a large frequency range compared to a beam with uniformly distributed piezoelectric layers.