• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.265-267
• /
• 2013

Tire labeling is an important issue to reduce $CO_2$ and to secure the safety of tire/vehicle on wet road. A basic study on the effects of tire basic stiffness design on tire labeling performance has been done through experimental test. The pass-by noise is affected by tire structural design. The tire with lower side part stiffness and lower tread part stiffness has the lowest PBN level and the best wet grip. And the tire with higher tread part stiffness and higher side part stiffness has the better RR performance. Also it is observed that the trade-off between RR and wet grip exists for various tire stiffness design.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.74-84
• /
• 2015

The core activities of a bicycle manufacturer are design, engineering analysis, and manufacturing. Therefore, it is important to develop a configuration design system for bicycles in order to automate the design process and facilitate the use of design data in engineering analysis and manufacturing. In this paper, we present a method to develop a bicycle configuration design system based on the part-shape information model. The proposed method enables the construction of a CAD library using modeling functions with equations and parameters that are common to most 3D mechanical CAD systems. Furthermore, the part-shape information model ensures the independence between the configuration design system and the library, making it possible to extend the CAD library flexibly without changing the system architecture.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.848-851
• /
• 2002

In the field of automobile industry, lightweight problems are very important in terms of reducing fuel and protecting environment. To satisfy these demands, the attempt to substitute aluminum automobile components for cast steel part has been actively carried out. To fabricate the aluminum automobile suspension part that has the same mechanical properties with cast steel part, design conditions such as shape and dimension of part shall be established. Therefore in this study, shape and dimension conditions of suspension part were proposed. Aluminum automobile suspension part was fabricated by semi-solid die-casting process under the obtained design conditions. Moreover to evaluate the possibility of application to the automobile component, stress and fatigue analysis were performed by using ABAQUS S/W and compared with those of conventional automobile suspension part.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.300-305
• /
• 2013

사출성형에서 성형수축은 피할 수 없는 현상이다. 따라서 성형수축을 줄이기 위한 연구가 필요할 뿐만 아니라 성형수축의 특성을 명확히 파악하는 것이 필요하다. 본 연구에서는 유리섬유로 보강된 폴리카보네이트를 이용하여 2.5차원형상인 환상형상의 시편에서 보이는 성형수축 현상을 조사하였다. 환상시편은 외경의 크기와 두께를 달리하여 설계하였다. 성형조건은 수지온도, 보압시간 및 보압크기를 변수로 설정하였다. 여러 성형조건으로 성형된 시편에서 내경과 외경의 크기가 변하는 양상에 대해서 분석하였다. 성형된 시편의 외경과 내경의 치수는 금형의 치수보다 작게 나타났다. 시편의 외경이 클수록, 그리고 시편의 두께가 두꺼울수록 수출율은 작게 나타났다. 또한 게이트의 위치에 따라 수축의 크기가 방향성을 보였다. 따라서 성형된 시편은 원형이 아니라 타원형으로 나타났고 게이트 방향으로 내경과 외경이 가장 큰 수축을 보였다. 수축된 제품의 형상조절을 위해서는 게이트 설계와 같은 금형설계가 중요하다고 판단된다.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.744-752
• /
• 2012

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as an one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problems. In data preprocessing part, Principal Component Analysis(PCA) which is generally used in face recognition, which is useful to express some classes using reduction, since it is effective to maintain the rate of recognition and to reduce the amount of data at the same time. However, because of there of the whole face image, it can not guarantee the detection rate about the change of viewpoint and whole image. Thus, to compensate for the defects, Linear Discriminant Analysis(LDA) is used to enhance the separation of different classes. In this paper, we combine the PCA&LDA algorithm and design the optimized pRBFNNs for recognition module. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as two kinds of polynomials such as constant, and linear. The coefficients of connection weight identified with back-propagation using gradient descent method. The output of the pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to face image(ex Yale, AT&T) datasets and then demonstrated from the viewpoint of the output performance and recognition rate.

• 전산구조공학
• /
• 제9권3호
• /
• pp.97-105
• /
• 1996

본 연구에서는 모티프(Motif), ANCI-C, Fortran 언어를 사용하여 그래픽 입출력과 대화식 입력이 가능하며, 최적설계 수행에 필요한 모든 작업을 같이 병행할 수 있는 최적설계 통합환경을 개발하였다. 최적설계 통합환경은 전처리기(preprocessor), 최적설계부, 후처리기(postprocessor)로 구성하였다. 전처리기에서는 유한요소모형의 구성에 필요한 정보를 입력한 후 사용자가 입력한 정보를 즉시 확인할 수 있도록 하였다. 최적설계부에서는 전처리기에서 입력한 유한요소 정보를 바탕으로 최적설계 매개변수를 정의하고, 해를 구하는 과정으로 구성하였다. 후처리기에서는 구조물의 변형, 응력, 목적함수의 변화 등의 해석 결과를 가시화 함으로써 결과에 대한 비교.검토를 용이하게 하였다.

• 패션비즈니스
• /
• 제9권1호
• /
• pp.79-88
• /
• 2005

The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.

• 한국CDE학회논문집
• /
• 제16권1호
• /
• pp.21-30
• /
• 2011

Similarity assessment of a CAD model is one of important issues from the aspect of model re-using. In real practice, many new mechanical parts are designed by modifying existing ones. The reuse of part enables to save design time and efforts for the designers. Design time would be further reduced if there were an efficient way to search for existing similar designs. This paper proposes an efficient algorithm of similarity assessment for mechanical part model with design history embedded within the CAD model. Since it is possible to retrieve the design history and detailed-feature information using CAD API, we can obtain an accurate and reliable assessment result. For our purpose, our assessment algorithm can be divided by two: (1) we select suitable parts by comparing MSG (Model Signature Graph) extracted from a base feature of the required model; (2) detailed-features' similarities are assessed with their own attributes and reference structures. In addition, we also propose a indexing method for managing a model database in the last part of this article.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.46-50
• /
• 2000

The progressive die are multiple operations performed by means of a die having above two stages, on the each of stages performs a different operation as the sheet metal passes through the die hole. In the field of design and making tool for press working, the progressive die for sheet metal (STS 304, thickness : 0.5mm) is a specific division. In order to prevent the defects, the optimum design of the production part, strip layout, die design, die making and tryout etc. are necessary. They require analysis of many kinds of important factors, I. e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and constructed a progressive die of multi-stage and performed try out. Out of these processes the die development could be taken for advance. Especially the result of tryout and its analysis become the characteristics of this paper (part 1 and part 2) that nothing might be ever seen before such as this type of research method on all the processes. In the part 1 of this study we treated die design mostly.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 2부
• /
• pp.281-289
• /
• 2006

본 연구의 목적은 어린이를 위한 인터랙티브 TV (KidTV)의 개발 사례를 통하여 사용자 인터페이스 디자인에 있어 제품디자인 영역의 특수성이 반영된 보다 적합한 인터랙티브 제품의 디자인 개발 체계를 개발하기 위한 관점을 찾는데 있다. 이를 위하여 본 연구에서는 인터랙션 디자인 프로젝트에서 제품디자인적 문제해결 과제인 물리적 형태부여의 주요 요소인 인터랙션 스타일을 보다 합리적으로 조형요소로써 반영하기 위한 해결안으로써 "Form follows function" 이라는 루이스 설리반의 주장에서 힌트를 얻어 현시적 관점에서 그의 주장을 재해석하여 "Form follows Interaction" 이라는 디자인 키워드를 통하여 사용자 인터페이스 디자인에서의 제품디자인 측면의 인터페이스 개발을 위한 하나의 관점으로 제안하고자 한다. 이를 통하여 다양한 학제가 결합하여 진행할 수 밖에 없는 사용자 인터페이스 디자인에 있어 여러 다른 학제들과 제품디자인 영역간의 이해를 돕고 사용자 인터페이스 전체적인 관점에서 제품디자인 영역의 디자인 개발체계를 확립할 수 있는 하나의 관점을 제공하고자 한다.