This study was conducted to develop soybean paste sauce with walnuts and sesame seeds and apply it to cooked spinach to examine the applicability of the sauce. Two factors of soybean paste sauce, soybean paste and glutinous rice paste, were need to decide the quantity of the ingredients. Nine soybean paste sauces were produced with various compounding ratio of soybean paste and glutinous rice paste, and color, viscosity and sensory evaluations were performed. Sensory evaluations were measured by 7-point Likert scale. Color($4.08{\pm}1.22$), taste($4.72{\pm}1.24$), viscosity($4.96{\pm}1.39$) and overall quality($4.24{\pm}1.51$) of the sample(soybean paste 400 g, glutinous rice paste 400 g) got the highest scores. Therefore, the sample(soybean paste 400 g, glutinous rice paste 400 g) was applied to cooked spinach. Cooked spinach using developed sauce and cooked spinach using general soybean paste were prepared and performed sensory evaluation. As a result, all sensory items score of cooked spinach using developed sauce were higher than that using general soybean paste. Especially, taste($4.96{\pm}1.15$) and overall quality($0{\pm}1.16$) of cooked spinach using developed sauce were significantly higher than taste($4.38{\pm}1.53$) and overall quality($3.56{\pm}1.53$) of cooked spinach using commercial soybean paste(p<0.05). Consequently, the applicability of soybean paste sauce using natural seeds was confirmed.
This study is to determine the optimum amount(0, 3, 6, 9, 12%) of Jerusalem artichoke to powder(JA) addition to rice flour in the preparation of Sulgidduk added JA. The quality characteristics of Sulgidduk added JA were investigated in moisture content, pH, color, texture, and sensory evaluation. The moisture content of control was 44.22%, but Sulgidduk added JA was 36.10~5.89%. In the change of color, L-value was decreased with degree of JA added. In color analysis, lightness, redness and yellowness of the control showed 84.56, -0.66, and 11.50, respectively. Lightness was decreased, but redness and yellowness was increased against the control when ratio of addition was increased. In the texture analysis of Sulgidduk added JA, hardness was the highest in the control($5958.33\;g/cm^3$) while JA added group was $4,702.24{\sim}5,744.44\;g/cm^3$. The adhesiveness of Sulgidduk added JA had lower value than that of the control according to the ratio of addition. In cohesivenss, Sulgidduk added with 3% of JA showed the highest value as 82.72% while the group with 12% added had the lowest value as 26.03%. The springiness showed no significant difference, but the gumminess significantly differs according to the ratio of addition; the group with 3% of JA added showed the highest value, which showed the tendency of decrease according to the ratio of addition. In the sensory evaluation of Sulgidduk added with JA, the addition of 6% of JA had the highest score in color, taste and overall preference. These results suggest that the suitable amount of JA for making Sulgidduk is 6%.
The study started from the point that learners should be basically equipped to quickly respond to changes in demand for future human resources efficiently and effectively, and an attitude to take part in learning voluntarily should thus be cultivated. To this end, the author applied the TAI model based on a module as a class strategy to solve problems related to several classes occurred in specialized high schools. This application of the TAI model was also motivated by the necessity for designing an appropriate teaching-learning method that encourages improvement of self-learning capacity, consistent learning motivation, and willingness rather than external factors. Through this work, the author aims to heighten the interest of learners and improve endurance in learning. The study results are as follows. First, the learning unit was structuralized as a module and then learning stages were proceeded with so that capacity to adapt to learning would improve. The achievement standard (learning goal) was structuralized in a module type by analyzing and reorganizing the textbook considering the link between the actual practice field and a curriculum based on subject characteristics. Through the process of module type learning stages, the student's capacity to ascertain characteristics of units and to adapt to learning both improved. Second, through application of a TAI model based on a module, Self-Directed Learning capacity and capacity to adapt to a new field improved. By applying the module, Self-Directed Learning could be accomplished more effectively than in the existing passive learning environment. By grafting cooperative learning of the TAI model, students had greater interest and achievement in classes, self-confidence and community consciousness, and an opportunity to broaden their thinking. In particular, improvement of self-confidence is effective in cultivating the capacity required in industrial society to transcend the learning of simple functions and knowledge, as well as the capacity to adapt to new environments. Third, by solving tasks focused on fields related to industrial sites, not only actual survey capacity but also additional capacity to identify and solve tasks through various experiences improved. Furthermore, it was helpful for students to have interest and motivation about their own life and learning to cultivate the qualities and capacity to adapt to the working world where new knowledge and technology rapidly change. Fourth, by applying a standard-based assessment system for technical subjects introduced in 2012 to model design for learning plans, clearer and more objective assessment criteria were arranged, and individual learning through instruction at each achievement level could be accomplished. This improved achievement level of individual learners was helpful in reaching achievement goals at specific levels by overcoming the disadvantages of cooperative learning in each group.
This study examined methods for stand density control by using shape ratio (tree height/DBH) and its application for effective management of Pinus thunbergii coastal disaster prevention forests. We analyzed the present conditions (height, DBH, and density) of P. thunbergii coastal disaster prevention forests at 123 study sites on Jeju Island and west, south, and east coasts of South Korea and compared them with results from previous studies. The average shape ratio for P. thunbergii showed positive correlations with stand density and was significantly higher on the west coast (66.32) than on the south (49.57) and east (48.19) coasts and Jeju Island (48.29). Stands with shape ratio higher than 70 accounted for 50% of the total study sites on the west coast, indicating a decrease in their disaster prevention function compared to that of other previous studies. The stand density in most coastal areas, except the east coast, was significantly higher than the standards recommended by the Korea Forest Service and the Forestry and Forest Products Research Institute of Japan, indicating the need for stand density control. According to the growth estimation equation for P. thunbergii in the coastal area of South Korea, density control is required for young stands less than 14 years old, which show drastic increase in the shape ratio, to conserve their disaster prevention function. Particularly, the first thinning of P. thunbergii forests should be implemented before the stand age of 8 years that a shape ratio exceeds 70. For disaster-prone young stands (${\leq}20cm$ DBH) of P. thunbergii, the stand density was higher in the standard of Japan considering shape ratio than in that of Korea aiming timber production. Hence, the standard guidelines employed in Japan, which assign higher importance to disaster prevention function based on field surveys, can be applied effectively for controlling the stand density of P. thunbergii coastal forests in South Korea, to improve their disaster prevention function.
This study was conducted to analyze on the operational time and productivities of logging operations in whole-tree logging operation system by tower-yarder and swing-yarder, and in cut-to-length logging operation system by excavator with grapple in order to establish the efficient logging operation system and to spread logging operation technique. In the analysis of operational time, in case of whole-tree logging operation system, the felling time was 46.6 sec/cycle by chain saw, the yarding time was 480.6 sec/cycle by tower-yarder, the yarding time was 287.4 sec/cycle by swing-yarder and the bucking time was 155.14 sec/cycle by chain saw. In case of the cut-to-length logging operation system, the felling and bucking time was 225.65 sec/cycle by chain saw, the cut-to-length extraction time was 4,972 sec/cycle by excavator with grapple, the branches and leaves extraction time was 3,143 sec/cycle by excavator with grapple. The forwarding time was 4,688 sec/cycle by wheel type mini-forwarder, the forwarding time was 2,118 sec/cycle by excavator with grapple and small forwarding vehicle. In the analysis of operational productivities, in case of whole-tree logging operation system, the average felling performance was $57.89m^3/day$ by chain saw, the average yarding performance was $20.3m^3/day$ by tower-yarder, $31.55m^3/day$ by swing-yarder respectively, the average bucking performance was $20.3m^3/day$ by chain saw. In case of the cut-to-length logging operation system, the average felling and bucking performance was $11.96m^3/day$ by chain saw, the average cut-to-length extraction performance was $34.75m^3/day$ by excavator with grapple, the average branches and leaves extraction performance was $37.66m^3/day$ by excavator with grapple, the average length of operation road construction was 73.8 m/day by excavator with grapple. The average forwarding performance by wheel type mini-forwarder and the average forwarding performance by excavator with grapple and small forwarding vehicle was $15.73m^3/day$ and $65.03m^3/day$, respectively.
Park, Kyung-Seok;Lee, Seong-Youn;Choi, In-Hwa;Kim, Hyun-Sig;Ahn, Young-Sang;An, Ki-Wan
Journal of Korean Society of Forest Science
/
v.101
no.4
/
pp.710-721
/
2012
This study is to find out the search of the desirable tree cutting permit system by investigating and analyzing timber logger's consciousness in Korea. A sample group, including 64 officers in 5 Regional Forest Services and 27 National Forest Stations, 161 local government of 322 officers and team leaders with cutting permits, and 308 tree loggers was surveyed. The survey results showed that the ongoing harvest year plan for national, public and private-type forests, which was applied differently, could be integrated as 3.73 points, which was not significant among the groups. A total of 95.1% of the national forest officers stated that the environmentally friendly harvesting system could be improved and that it is exempted from bad broadleaf trees and renewal of forest type (4.14 points). An environmentally friendly harvesting system including the type of forest and location status (slide, soil, etc) is needed (3.87 points). Additionally, the round timber purchased from tree loggers managed in 2009 was about 10.6% of the domestic timber supply ($3,176,000m^3$) and round timber sales were about 50.1%. A total of 72% of the loggers suggested that a environmentally friendly harvesting system is needed (4.11 points). These results show that a new system for harvesting timber is needed to replace the current environmentally unfriendly harvesting system, and that tree loggers should be registered for management.
It is widely recognized that manipulation of body position takes advantage of the influences of gravity for improving oxygenation. The study aims to determine the effects of positioning(supine, prone, right lateral decubitus and left lateral decubitus positions) applied to the mechanically ventilatory acute respiratory failure patients on arterial oxygen partial pressure($PaO_2$), alveolar arterial oxygen tension difference($AaDO_2$), mean aterial pressure, peak inspiratory pressure and plateau pressure. Thirty two acute respiratory failure patients admitted to the medical intensive care unit at Kangnam St. Mary's Hospital, The Catholic University of Korea from March 1997 to January 1998, were divided into three groups by radiographic evidence of unilateral or bilateral lung disease. In group 1 with dominant right lung disease were twelve subjects, group 2 with dominant left lung disease had eight subjects and group 3 had twelve subjects with bilateral lung disease. The variables were measured in 30 minutes after each position of supine, prone, good lung down lateral decubitus and sick lung down lateral decubitus position. The position order was done at random by Latin squre design. The results are as follows; 1) With group 1 patients, the $PaO_2$ in the left lateral decubitus and prone position were $126.8{\pm}30.8$ mmHg and $106.7{\pm}36.8$ mmHg, respectively(p=0.0001). 2) With group 2 patients, the $PaO_2$ in the prone and the right lateral decubitus position were $121.7{\pm}44.7$ mmHg and $118.5{\pm}31.7$ mmHg, respectively (p=0.0018). 3) With group 3 patients, the $PaO_2$ was $143.6{\pm}36.6$ mmHg in the prone position (p=0.0001). 4) With group 1 patients, the $AaDO_2$ in the left lateral decubitus and the right lateral decubitus position were $178.1{\pm}29.7$ mmHg and $233.1{\pm}24.4$ mmHg, respectively(p=0.0001). 5) With group 2 patients, the $AaDO_2$ in the prone and the left lateral decubitus postion were $184.0{\pm}39.5$ mmHg and $231.0{\pm}23.9$ mmHg, respectively(p=0.0019). 6) With group 3 patients, the $AaDO_2$ in the prone and the supine postion were $377.1{\pm}35.6$ mmHg and $435.7{\pm}13.1$ mmHg, respectively (p=0.0001). 7) There were no differences among the mean arterial pressure, peak inspiratory pressure and plateau pressure for each of the supine, prone, left lateral decubitus and right lateral decubitus position. The results suggest that oxygenation may improve in mechanically ventilatory patients with unilateral lung disease when the position is good lung dependent and prone, and patients with bilateral lung disease when the position is prone without any effects on the mean arterial pressure and airway pressure. It is suggested that body positions improve ventilation/perfusion matching and oxygenation need to be specified in patient care plans.
Yoo, Young Bok;Kong, Won Sik;Oh, Se Jong;Jhune, Chang Sung;Shin, Pyung Gyun;Kim, Beom Gi;Kim, Gyu Hyun;Park, Minsun;Min, Byung Re
Journal of Mushroom
/
v.2
no.3
/
pp.115-126
/
2004
Somatic hybrids of inter-compatible and inter-incompatible strains were obtained by protoplast fusion. The fusion products between compatible strains, Pleurotus ostreatus and P. florida, formed heterokaryons, while fusants between incompatible strains such as P. cornucopiae + P. florida, P. ostreatus + Ganoderma applanatum, P. florida + Ganoderma lucidum, and P. ostreatus + Flammulina velutipes formed synkaryons that retained genes from both parents. The heterokaryons showed the same level of basidioma development. In contrast, the synkaryons showed unique characteristics including clamp connection formation at mitosis, either partner basidioma development, and abnormal segregation and recombination compared with inter-compatible strains. Synkaryons can be classified into homokaryoyic and heterokaryotic type. A comparison of somatic hybrids with compatible and incompatible strains was made using random amplified polymorphic DNA (RAPD) analysis. The heterokaryons between compatible species showed the same level of variability and contained both parental RAPD bands. In contrast, most of the synkaryons between incompatible species showed similarity to those of either parental bands and non-parental RAPD bands. Synkaryons can be classified into microgenome insertion type and macrogenome insertion type. A tetrapolar mating system was found among monospore isolates in somatic hybrids and wild type P. ostreatus. Homokaryons from each somatic hybrid combination were paired with tester homokaryons of the initial wild type of P. ostreatus. The changed mating types were identified in progenies. The pattern of mating type switching in somatic hybrids depends on compatibility of fusion partner. There are several factors related to the mechanism of clamp connection formation and fruiting body development of synkaryons. Of these,the major factor may be associated with self-fertility and mating type switching such as homokaryotic fruiting of wild type P. ostreatus. This review will discuss these aspects.
Research regarding corporate associations in marketing has generally been approached using the association theory. However, limited research investigates the effect of corporate associations on consumer loyalty to individual brands by examining the role of self connectedness with a corporate image. The activation of behavior-related constructs can influence individuals' behaviors without their intention or conscious awareness. A recently developed body of research suggests that self connection can play an important role in affecting subsequent behaviors. Although these effects have received considerable attention, the set of mechanisms involved in self connectedness and loyalty to individual brands is not clear. An active self account in which associative constructs can affect behavior by temporarily altering the active self-concept may lead to behavior or evaluation. If the exposure to a corporate brand can induce consumers' cognitive associations and goal-primed effects through the role of active self accounting, the connectedness between the consumer's self and the corporate brand could be developed and this connectedness could be explained by associative and connection models and the goal priming theory. Therefore, this study investigates the influence of corporate associations on loyalty to individual brands through connections between the corporate and the consumer's self. There are three main purposes of the research. First, theories regarding corporate associations will be explored. Second, theories of self-concept will be investigated and self connectedness with corporate brands will be explored. Third, the effects of the connectedness between the self and the corporation on corporate identification and loyalty to individual brands will be investigated. For the purposes of this research, the types of corporate associations are classified into corporate ability (CA) associations and corporate social responsibility (CSR) associations. Furthermore, the connectedness between the consumer's self and the corporate image are divided into two concepts: the connectedness between the individual self-concept and the corporate identity and the connectedness between social self-concept and the corporate identity. This study suggests the hypotheses that the types of consumer self connections with the corporate image could vary according to the types of corporate associations created and further that the connectedness between the corporate association and the consumer's self-concept have positive effects on loyalty to corporate individual brands. The results of testing these hypotheses are as follows. First, corporate ability associations enhance the connectedness between the consumer's individual self and corporate brands. That is, corporate ability associations influence individual connectedness between the corporate and individual self-concept positively from the viewpoint of the consumer's personal ability and branding success. In addition, corporate social responsibility associations have a positive effect on social connectedness between the corporation and the consumer's social self-concept. Second, the connectedness between the corporate brand and the consumer's self-concept affects identification with the corporation. The consumer's personal self and social self connectedness induces corporate identification. Third, individual self connectedness has a positive effect on loyalty to corporate individual brands, while social self connectedness does not. This also means that individual self connectedness with the corporate image or brand plays a more important role in forming individual brand loyalty than social self connectedness with the corporate does. In addition, social connectedness cannot influence individual brand loyalty until it passes through identification with the corporate. Fourth, consumers who experience identification with a corporate identity also show positive responses to corporate individual brands. That is, consumers also develop loyalties toward individual brands through the corporate identification because self-pursued goals that are induced by corporate associations can be achieved by consuming the individual brands that are sold by the corporate that the consumers identify with.
The purposes of this study were to identify the contents and satisfaction level of the patients received home care service, and to compare the differences of the contents by the characteristics of the patients. Seventy eight patients received home care service from 1st Jan. to 30th Sept., 1996 were data-collected to analyze the contents and outcomes of home care service. Sixty-nine patients currently receiving home care service were participated to evaluate the satisfaction level of home care service. The data were analyzed using mean, standard deviation, $x^2$ test, and ANOVA by SPSS $PC^+$ program. The findings of this study were as follow : 1. The contents & outcomes of home care service 1) The mean age of the subjects was 64.4 years: 58% of them were female. Those who living in Seoul were 83% and the rest of the subjects was living in Kyung-Gi. 2) The subjects who had one diagnosis were 41%. Over 60% of them had the disease of neurologic & sensory system. 3) The mean number of visit was 6. Only one visit was 22%. The mean time of care was 79 minutes. Duration of visit from 31 minutes to 60 minutes were 47 %. The subjects who terminated the visit because of death were 67.3%. 62% of the persons who referred them to the home care service were nurses. 4) The pain after the service was more relieved than before. The amounts of intake, the degree of bed sore, edema & fracture after the service were more improved than before. Health status after the service was improved in general. 5) There were significant differences between initial and last conscious level in tracheostomy care & oxygen inhalation care. There was significant difference between initial and last degree of activity in blood sugar check. 6) There were significant differences on the number of visit in assessment of the status, evaluation & observation, vital sign check, skin care, injection, medication, bed sore care, colostomy care, relaxation therapy for pain relief, patient education, family care, exercise therapy, position change, supply of disinfected equipments and infection control. There were significant differences on visiting time in nasogastric tube care, drainage tube care and oxygen inhalation care. 2. The satisfaction level of home care service 1) 50% were male. Over 60 years of the subjects was 61 %. Those who living in Seoul were 82%. 2) The subjects who had one or two diagnosis were 32% respectively. 55% of the persons who referred them to the home care service were nurses. 3) Total level of satisfaction of home care service was very high. 4) The older the age, the higher the satisfaction level. The larger the number of visit, the higher the satisfaction level. 5) The subjects who were in cloudy state were higher level of satisfaction than in alert or coma state. The subjects whose activity were normal or who needed assistance were higher level of satisfaction than bedridden or immobilized subjects. These findings suggested that the patients had substantial need for posthospital care. They tended to be elderly and to have experienced the wide range of health problems associated with aging, chronicity, including limitations in activities, and other serious health problems. So, the nationwide home care systems beyond the limit of demonstration program by local association and the development of the effective financial system of home based health care are necessary for the clients who are in need of home care.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.