• Current Photovoltaic Research
• /
• v.9 no.4
• /
• pp.128-132
• /
• 2021

Advances in screen printing technology have been led to development of high efficiency silicon solar cells. As a post PERx structure, an n-type wafer-based rear side TOPCon structure has been actively researched for further open-circuit voltage (Voc) improvement. In the case of the metal contact of the TOPCon structure, the poly-Si thickness is very important because the passivation of the substrate will be degraded when the metal paste penetrates until substrate. However, the thin poly-Si layer has advantages in terms of current density due to reduction of parasitic absorption. Therefore, poly-Si thickness and firing temperature must be considered to optimize the metal contact of the TOPCon structure. In this paper, we varied poly-Si thickness and firing peak temperature to evaluate metal induced recombination (Jom) and contact resistivity. Jom was evaluated by using PL imaging technique which does not require both side metal contact. As a results, we realized that the SiN_x deposition conditions can affect the metal contact of the TOPCon structure.

• Current Photovoltaic Research
• /
• v.12 no.2
• /
• pp.31-36
• /
• 2024

Passivating contacts are a promising technology for achieving high efficiency Si solar cells by reducing direct metal/Si contact. Among them, a polysilicon (poly-Si) based passivating contact solar cells achieve high passivation quality through a tunnel oxide (SiO_x) and poly-Si. In poly-Si/SiO_x based solar cells, the passivation quality depends on the amount of dopant in-diffused into the bulk-Si. Therefore, our study fabricated cells by inserting silicon oxide (SiO₂) as a doping barrier before doping and analyzed the barrier effect of SiO₂. In the experiments, p⁺ poly-Si was formed using spin on dopant (SOD) method, and samples ware fabricated by controlling formation conditions such as existence of doping barrier and poly-Si thickness. Completed samples were measured using quasi steady state photoconductance (QSSPC). Based on these results, it was confirmed that possibility of achieving high V_oc by inserting a doping barrier even with thin poly-Si. In conclusion, an improvement in implied V_oc of up to approximately 20 mV was achieved compared to results with thicker poly-Si results.

• Journal of Nutrition and Health
• /
• v.4 no.1
• /
• pp.1-19
• /
• 1971

Nutritional anemia is an important nutritional problem affecting large population groups in most developing countries. Nutritional anemia is caused by the absence of any dietary essential involed in hemoglobin formation or by poor absorption of these dietary components. The most likely causes are lack of dietary iron, and folate, vitamin $B_{12}$ and high qualify protein. Anemia is considered to be a late mainfeastation of nutritional deficiencies, and even mild anemia is not the earilest sign of such a deficiency. Therefore, the object of therapy is to correct underlying deficiency rather than merely its manifestation. Iron deficiency anemia is generally much the most common form of anemia. And it is very prevalent particularly in pregnant women and young children, especially under five year of life. According to the rapid growth rate of infants, dietary iron should he provided for infants over three months of age in adequate amounts for the synthesis of hemoglobin required by the increasing blood volume and for the demands of newly formed cells. The principal causes of iron deficiency anemia are an inadequate dietary iron content, interference with absorption of iron from the intestine, excessive losses of iron from the body, disturbance of iron metabolism by infection, and social and cultural environments. The present study is planned to obtain informations concerning nutritional anemia through anthropometric and biochemical determinations for the assessment of nutriture in pre-school children. Determination was taken in 226 pre-school children in ruraI arae in 1968, 122 pre-school children in 1970, and 1526 hospitalized pre-school children in 1970. The results of this study are as follows; (1) According to Iowa Malnutrition Borderline (85 percentile) for weight, the proportions of underweighed pre-school boys and girls in rural area were 47.2% and 46.2% in1968, and were 36.1% and 51.8% in 1970. According to Iowa Malnutrition Borderline for height, the proportions of underheight boys and girls in rural area were 30.5% and 33.7%, and were 26.2% and 21.8% in 1970. Malnutrition scores of underweight for height values of boys and girls in rural area were 19.3 and 17.3 in 1968, and the scores of boys and girls were 15.6 and 15.5 in 1970. (2) The mean hemoglobin values of boys and girls in rural area were $11.2{\pm}1.8g/100ml\;and\;11.4{\pm}1.6g/100ml$ in 1968. In 1970, the mean values of boys and girls in rural area were $11.3{\pm}1.3g/100ml\;and\;11.7{\pm}2.4g/100ml$. The mean hemoglobin values of hospitalized boys and girls were $11.9{\pm}2.2g/100ml\;and\;11.7{\pm}2.4g/100ml$ in 1970. It is found that 92 of 215 children (42.7%) in rural area had concentrations of hemoglobin less than 11.0g/100ml in 1968. In 1970, 55 of 121 children (45.4%) in rural area and 559 of 1526 hospitalized children (36.6%) had concentrations of hemoglobin less than 11.0g/100ml. (3) The mean hematocrit levels of hospitalized boys and girls were $35{\pm}26.8%\;and\;35.4{\pm}6.4%$ in 1970. And 443 of 1334 hospitalized children (33.2%) had hematocrit values below 33%. (4) The average mean corpuscular hemoglobin concentration levels of hospitalized boys and girls were $32.4{\pm}2.2\;and\;32.3{\pm}2.2$ in 1970. And 1016 of 1352 hospitalized children (75.1%) had the mean corpuscular hemoglobin values below 34. (5) The mean iron values of young children in rural area and hospitalized children were $62.0{\pm}6.3{\mu}g/100ml\;and\;60.7{\pm}22.8{\mu}g/100ml$. The proportions of anemia cases below $50{\mu}g/100ml$ in rural area was 37.9%, and 34.3% in hospitalized children. (6) The mean total iron binding capacity of young children in rural area was $376{\pm}57.88{\mu}g/100ml,\;and\;342.2{\pm}6.15{\mu}g/100ml$ in hospitalized children. (7) The average transferrin saturation percentage of young children in rural area was $16.9{\pm}4.7%,\;and\;18.0{\pm}8.4%$ in hospitalized children. The proportions of anemia cases below 15% of young chi1dren in rural area and hospitalized children were 48.3% and 41.2%. Therefore, authors wish to recommend that the following further studies should be undertaken: (1) Standardization of simplied laboratory examination of nutritional anemia. (2) The prevalence of nutritional anemia and the requirements of iron, folate, and vitamin $B_{12}$ of pre-school children. (3) The content and absorption of iron in Korean food. (4) The pathogenesis of nutritional anemia and prevention of parasitic disease. (5) Maternal health and nutrition education.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.154.2-154.2
• /
• 2016

In this work, we introduce a solution-processed CdS interlayer for use in inverted bulk heterojunction (BHJ) solar cells, and compare this material to a series of standard organic and inorganic cathode interlayers. Different combinations of solution-processed CdS, ZnO and conjugated polyelectrolyte (CPE) layers were compared as cathode interlayers on ITO substrates to construct inverted solar cells based on $PTB7:PC_{71}BM$ and a $P3HT:PC_{61}BM$ as photoactive layers. Introduction of a CdS interlayer significantly improved the power conversion efficiency (PCE) of inverted $PTB7:PC_{71}BM$ devices from 2.0% to 4.9%, however, this efficiency was still fairly low compared to benchmark ZnO or CPE interlayers due to a low open circuit voltage ($V_{OC}$), stemming from the deep conduction band energy of CdS. The $V_{OC}$ was greatly improved by introducing an interfacial dipole (CPE) layer on top of the CdS layer, yielding outstanding diode characteristics and a PCE of 6.8%. The best performing interlayer, however, was a single CPE layer alone, which yielded a $V_{OC}$ of 0.727 V, a FF of 63.2%, and a PCE of 7.89%. Using $P3HT:PC_{61}BM$ as an active layer, similar trends were observed. Solar cells without the cathode interlayer yielded a PCE of 0.46% with a poor $V_{OC}$ of 0.197 V and FF of 34.3%. In contrast, the use of hybrid ZnO/CPE layer as the cathode interlayer considerably improved the $V_{OC}$ of 0.599 V and FF of 53.3%, resulting the PCE of 2.99%. Our results indicate that the CdS layer yields excellent diode characteristics, however, performs slightly worse than benchmark ZnO and CPE layers in solar cell devices due to parasitic absorption below 550 nm. These results suggest that the hybrid inorganic/organic interlayer materials are promising candidates as cathode interlayers for high efficiency inverted solar cells through the modification of interface contacts.

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.9.1-9.11
• /
• 2018

Background: In recent years, with the prohibition of antibiotics used as growth stimulants in the nutrition of farm animals, researchers have searched for alternative natural and reliable products in order to be able to sustain the developments experienced during the use of antibiotics and to overcome the possible inconveniences. In this context, studies on evaluation of essential oils in poultry nutrition have been reported to improve the utilization of feed, stimulate the release of digestive enzymes, increase absorption in the stomach and intestines, antimicrobial and anti-parasitic effects and thus, can be an alternative to antibiotics and improve meat quality as well. Indeed, this study has been carried out to explore the effects of the addition of 150 mg/kg capsicum oleoresin (CAP), carvacrol (CAR), cinnamaldehyde (CIN) or their mixture (CAP+CAR+CIN) into the broilers' ration over sensory, physical and chemical properties in breast meat and leg meat. Methods: Experiments were conducted over 400 male and female broiler chicks (Ross-308) in 5 groups (1 control group and 4 treatment groups), each composed of 80 chicks. The control group was fed without feed additives while the second, third, fourth and the fifth groups were fed with 150 mg CAP/kg feed, 150 mg CAR/kg feed, 150 mg CIN/kg feed, and 150 mg CAP+CAR+CIN/kg feed, respectively. Results: Addition of CAP, CAR, CIN or CAP+CAR+CIN had effects on the sensory (of taste, tenderness, juiciness and overall acceptability); physical properties (of $L^*$ value and toughness), the chemical properties (of DM, CF, CP, linoleic, EPA, behenic, MUFA, PUFA and ${\Sigma}n-6$ of the leg meat), the physical characteristics (of toughness and firmness), and the chemical properties (of CF, CP, linoleic, ecosenic, EPA, lignoseric, MUFA and ${\Sigma}n-3$) of the breast meat in comparison to control group. Furthermore, while the treatments had positive impacts on thawing loss, cooking loss and water holding capacity in both breast and leg meat; no effect was observed on pH value and lipid oxidation on day 1, day 4 and day 8. Conclusion: The results strongly suggested that the addition of CAP, CAR, CIN or CAP+CAR+CIN to the rations of the broiler chicks changed the sensory, physical and chemical properties of breast and leg meat. It was also observed that these compounds were more effective when they were added to the ratio as a mixture rather than adding them individually.