• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.863-874
• /
• 2009

The engineering characteristics and the reinforcement effect of the elephant foot method were discussed with parametric study. The elephant foot method is adopted to support the loads transferred from tunnel crown and improve bearing capacity of elephant foot in poor ground condition. The evaluation of reinforcement effect, which has the mechanical relationship between ground condition, footing size and reinforcement system, was carried out through the previous research and numerical analysis. In addition, the simple design chart was proposed to estimate the applicability of the elephant foot reinforcement method. It will be practical for the engineer to determine the optimum reinforcement method for safe tunnelling in soft ground condition.

• 국제초고층학회논문집
• /
• 제7권2호
• /
• pp.161-170
• /
• 2018

Rapid urbanization, resource depletion, and limited land are further increasing the need for skyscrapers in city centers; therefore, it is imperative to enhance tall building performance efficiency and energy-generative capability. Potential performance improvements can be explored using parametric multi-objective optimization, aided by evaluation tools, such as computational fluid dynamics and energy analysis software, to visualize and explore skyscrapers' multi-resource, multi-system generative potential. An optimization-centered, software-based design platform can potentially enable the simultaneous exploration of multiple strategies for the decreased consumption and large-scale production of multiple resources. Resource Generative Skyscrapers (RGS) are proposed as a possible solution to further explore and optimize the generative potentials of skyscrapers. RGS can be optimized with waste-energy-harvesting capabilities by capitalizing on passive features of integrated renewable systems. This paper describes various resource-generation technologies suitable for a synergetic integration within the RGS typology, and the software tools that can facilitate exploration of their optimal use.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.223-231
• /
• 2013

최근 구조물의 고층화, 대형화 및 장스팬 활용 등의 요구로 고강도 고성능 재료의 건축물과 교량에의 적용이 증가하는 추세이다. 본 논문은 고성능강(HSA800)의 건축구조용 재료 특성과 고성능강재를 사용한 부재의 설계 기준을 위한 기본적인 연구의 일부이다. 조립각형강관 기둥의 국부좌굴 거동과 현행 폭두께비 설계 제한치를 검토하기 위하여 다양한 폭두께비 변수를 계획하고, 단축압축실험을 실시하였다. 또한, 유한요소결과로 얻어낸 단주의 국부좌굴거동을 실험결과와 비교하였으며 검증된 해석모델을 이용하여 변수연구를 수행하였고 현행 설계기준의 적용성에 대해 검토하였다.

• 한국지진공학회논문집
• /
• 제10권6호
• /
• pp.47-56
• /
• 2006

지진응답 제어를 위하여 사장교 구조물에 장착된 준능동MR 댐퍼의 경제적 효율성 평가기법을 제안하였으며, 다양한 지반운동 특성에 대하여 비용효율성을 극대화하는 MR 댐퍼의 최적용량에 대한 분석을 수행하였다. MR 댐퍼의 비용효율성 평가를 위하여 생애주기비용 개념을 적용하였으며, 생애주기비용을 이루는 비용항목 중 손상비용의 기대값을 평가하기 위하여 지진재해로 인한 사장교의 파괴확률을 추정하였다. 사장교의 파괴로 인한 직 간접 손상비용의 규모를 매개변수로 하여 비용효율성을 평가하였다. 비용효율성 평가지수는 MR 댐퍼의 장착으로 인한 추가 투자비용과 사장교 구조물의 손상비용으로 이루어진 함수로서, 탄성받침이 사용된 기존의 설계에 대한 경제적 효율성을 나타내도록 정의하였다. 사장교의 지진응답 제어를 위하여 장착된 MR 댐퍼는 경제적으로 효율적인 대안인 것으로 나타났다. 지반운동의 특성과 손상비용 규모에 대한 MR 댐퍼의 최적 용량을 분석한 결과, 지진위험도 및 손상비용 규모가 커짐에 따라 가장 높은 비용효율성을 가지는 MR 댐퍼용량이 증가하는 것을 확인할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2061-2078
• /
• 2006

The main purpose of this paper is to establish the high temperature structural integrity evaluating procedures for the next generation reactors, which are to be operated at over 500$^{\circ}C$ and for 60 years. To do this, comparison studies of the high temperature structural design codes and assessment procedures such as the ASME-NH (USA), RCC-MR (France), DDS (Japan), and R5 (UK) are carried out in view of the accumulated inelastic strain and the creep-fatigue damage evaluations. Also the application procedures of the ASME-NH rules with the actual thermal and structural analysis results are described in detail. To overcome the complexity and the engineering costs arising from a real application of the ASME-NH rules by hand, all the procedures established in this study such as the time-dependent primary stress limits, total accumulated creep ratcheting strain limits, and the creep-fatigue damage limits are computerized and implemented into the SIE ASME-NH program. Using this program, the selected high temperature structures subjected to two cycle types are evaluated and the parametric studies for the effects of the time step size, primary load, number of cycles, normal temperature for the creep damage evaluations and the effects of the load history on the creep ratcheting strain calculations are investigated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.1001-1008
• /
• 2006

The main objective of this paper is to compare economical effectiveness of typical methods for checking stability in principal components of steel cable-stayed bridges. Elastic and inelastic buckling analyses are carried out for frame-like numerical models of cable-stayed bridges. The axial-flexural interaction equations prescribed in AASHTO Allowable Stress Design (ASD) and AASHTO Load and Resistance Factor Design (LRFD) are used in order to check the stability of principal components. Parametric studies are performed for numerical models which have the center span length of 300m, 600m, 900m and l200m with different girder depths. Peak values of the interaction equations are calculated at the intersection point between girders and towers. These peak values are considered as a major factor to design of principal components of cable-stayed bridges. As a result, more economical design for girders and towers can be feasible using the inelastic buckling analysis. In addition, LRFD codes are more economical about 20% on the average than ASD codes for all numerical models of cable-stayed bridges.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.3-9
• /
• 2005

Venetian blinds are used with windows to improve the uniformity ratio of illuminance and interior daylighting distribution under direct sunlit conditions. The main objective of Venetian blinds shading system is to obstruct direct sunlight and at the same time allow daylight to penetrate into the room. Venetian blinds would have greater effect on the interior daylighting condition under clear sky which has both skylight and sunlight than overcast sky which has only skylight. However, due to the lack of data, design and evaluation tools, it is difficult for architects to choose or install venetian blinds during the building design stages. The purpose of this study was to develop an analysis method for shading and daylighting effects of Venetian blinds using the RADIANCE program. The major variables related to the venetian blinds included blinds's slat angle and the ratio of slat width to window height, the radius slat of curvature and the building azimuth. In this study, a series of parametric physical mock-up model measurements and genblinds command in the RADIANCE simulations. The results of this study will provide building designers with the design data at early design stages.

• 부모자녀건강학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2011

Purpose: This study was aimed to classify the major subjects and theme and to analyze the data collection and analysis method in research papers published in the Korean Parent-Child Health Journal of the Academic Society of Parent-Child Health since 1998. Methods: A total 152 studies published from the first edition to volume 12, number 2 were reviewed using structured analysis criteria developed by researchers; research type, research design, research subjects, research theme, data collection and analysis method. Research theme was founded 4 nursing domains. Data collection and analysis method of papers were limited to quantitative and qualitative researches. Results: One hundred papers conducted quantitative research; 79.0% used survey design. Most of the data collection and analysis method in quantitative research were self-reported questionnaire (69.4%) and parametric statistics respectively. The research subjects of sixty three papers were parent with well or child. The common domain studies was human related concepts such as raring. Conclusion: The findings of this study suggest that published studies have been improved and diversified, however, detailed and clear evaluation tool that assess study process and method should be developed as a way to further improve the quality of published papers in the Korean Parent-Child Health Journal.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.347-359
• /
• 2019

Modular construction has been increasingly used for mid-to-high rise buildings attributable to the high construction speed, improved quality and low environmental pollution. The individual and repetitive room-sized module unit is usually fully finished in the factory and installed on-site to constitute an integrated construction. However, there is a lack of design guidance on modular structures. This paper mainly focuses on the evaluation of the initial stiffness of corrugated steel plate shears walls (CSPSWs) in container-like modular construction. A finite element model was firstly developed and verified against the existing cyclic tests. The theoretical formulas predicting the initial stiffness of CSPSWs were then derived. The accuracy of the theoretical formulas was verified by the related numerical and test results. Furthermore, parametric analysis was conducted and the influence of the geometrical parameters on the initial stiffness of CSPSWs was discussed and evaluated in detail. The present study provides practical design formulas and recommendations for CSPSWs in modular construction, which are useful to broaden the application of modular construction in high-rise buildings and seismic area.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.651-664
• /
• 2022

A precise prediction of the ultimate bond strength between rebar and surrounding concrete plays a major role in structural design, as it effects the load-carrying capacity and serviceability of a member significantly. In the present study, Gaussian models are employed for modelling bond strength of ribbed steel bars embedded in concrete. Gaussian models offer a non-parametric method based on Bayesian framework which is powerful, versatile, robust and accurate. Five different Gaussian models are explored in this paper-Gaussian Process (GP), Variational Heteroscedastic Gaussian Process (VHGP), Warped Gaussian Process (WGP), Sparse Spectrum Gaussian Process (SSGP), and Twin Gaussian Process (TGP). The effectiveness of the models is also evaluated in comparison to the numerous design formulae provided by the codes. The predictions from the Gaussian models are found to be closer to the experiments than those predicted using the design equations provided in various codes. The sensitivity of the models to various parameters, input feature space and sampling is also presented. It is found that GP, VHGP and SSGP are effective in prediction of the bond strength. For large data set, GP, VHGP, WGP and TGP can be computationally expensive. In such cases, SSGP can be utilized.