• 한국경영과학회지
• /
• 제30권1호
• /
• pp.95-104
• /
• 2005

A desirability function approach to a multiresponse problem is proposed considering process parameter fluctuation which may amplify the variance of response. It is called POE (propagation of error), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. In order to obtain more robust process parameter setting, a new desirability function is proposed by considering POE as well as distance-to-target of response and response variance. The proposed method is illustrated using a rubber product case in Ribeiro et al. (2000).

• 대한산업공학회지
• /
• 제31권2호
• /
• pp.164-172
• /
• 2005

A loss function approach to a multiresponse problem is considered, when process parameters are regarded as random variables. The variation of each response may be amplified through so called propagation of error (POE), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. The forms of POE for each response and for a pair of responses are proposed and they are reflected in our loss function approach to determine the optimal condition. The proposed method is illustrated using a polymer case. The result is compared with the case where parameter fluctuation is not considered.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.235-244
• /
• 2006

Recently, speed sensorless vector control for synchronous reluctance motors (SYRMs) has deserved attention because of its advantages. Although rotor angle calculation using flux estimation is a straightforward approach, the DC offset can cause an increasing pure integrator error in this estimator. In addition, this method is affected by parameter fluctuation. In this paper, to control the motor at the low speed region, a modified programmable cascaded low pass filter (MPCPLF) with sensorless online parameter identification based on a block pulse function is proposed. The use of the MPCLPF is suggested because in programmable, cascade low pass filters (PCLPF), which previously have been applied to induction motors, the drift increases vastly wl)en motor speed decreases. Parameter identification is also used because it does not depend on estimation accuracy and can solve parameter fluctuation effects. Thus, sensorless speed control in the low speed region is possible. The experimental system includes a PC-based control with real time Linux and an ALTERA Complex Programmable Logic Device (CPLD), to acquire data from sensors and to send commands to the system. The experimental results show the proposed method performs well, speed and angle estimation are correct. Also, parameter identification and sensorless vector control are achieved at low speed, as well as, as at high speed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.535-538
• /
• 2005

We report the influence of the threshold voltage and mobility fluctuation in TFT on current mode digital circuit performance. We found that the threshold voltage showed more serious circuit malfunction. We studied new circuit configuration for improvement.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.397-400
• /
• 2010

동영상은 촬영 당시의 주변의 조명변화에 의해 원치 않는 밝기 변화가 발생한다. 이러한 훼손을 플리커라 하고 시각적으로 불안정한 영상의 흔들림으로 인지된다. 플리커는 동영상 시퀸스로부터 유용한 정보를 추출하기 힘들게 하므로 미리 제거하여 안정된 형태로 만들어야 한다. 본 논문은 플리커의 발생을 감마보정요소를 포함하는 선형모델로 모델링하고 이를 분석하여 제거하는 새로운 알고리즘을 제안한다. 제안하는 알고리즘은 플리커를 유발하는 게인과 오프셋 파라미터를 분리하고 게인 요소를 감마 보정으로 추정한다. 이 과정을 통하여 추정된 게인과 오프셋 플리커 영상 시퀸스에 역으로 적용하여 플리커를 제거한다. 제안하는 방법의 객관적인 성능을 보이기 위해 움직임이 없는 인위적인 테스트 영상 시퀸스에 대해 실험한 결과와 움직임이 있는 실제 영상 시퀸스에 적용한 결과를 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.963-970
• /
• 2012

We review novel chemical kinetics proposed for quantitative description of fluctuations in reaction times and in the number of product molecules in a heterogeneous biological system, and discuss quantitative interpretation of randomness parameter data in enzymatic turnover times of ${\beta}$-galactosidase. We discuss generalization of renewal theory for description of chemical fluctuation in product level in a multistep biopolymer reaction occurring in a dynamically heterogeneous environment. New stochastic simulation results are presented for the chemical fluctuation of a dynamically heterogeneous reaction system, which clearly show the effects of the initial state distribution on the chemical fluctuation. Our stochastic simulation results are found to be in good agreement with predictions of the analytic results obtained from the generalized master equation.

• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.109-120
• /
• 2008

An innovative method of changing a centrifugal low specific speed pump performance and pressure fluctuation by applying outlet flaps to impeller exit has been investigated. The outlet blade edge section corresponds to the trailing edge of wing on the circular-cascade, which dominates the pump performance and pressure fluctuation. Computational fluid dynamics (CFD) analysis of the entire impeller and volute casing and an experimental investigation are conducted. The pressure fluctuation and the vibration of the shaft are measured simultaneously. Kurtosis is applied as a dimensionless parameter with which the unevenness of velocity distribution at impeller outlet is indicated. The influence of the flaps on the pressure fluctuation is explained by the kurtosis. This paper presents a theoretical method of predicting the pump performance related to the attachment of a flap at impeller outlet.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1139-1146
• /
• 1999

Reliability analysis of structures based on fracture mechanics requires knowledge on statistical characteristics of the parameter C and m in the fatigue crack growth law, $da/dN=C({\Delta}K)^m$. The purpose of the present study is to investigate if it is possible to predict fatigue crack growth rate by only the fluctuation of the parameter C. In this study, Paris-Erdogan law is adopted, where the author treat the parameter C as random and m as constant. The fluctuation of crack growth rate is assumed only due to the parameter C. The growth resistance coefficient of material to fatigue crack growth (Z=1/C) was treated as a spatial stochastic process, which varies randomly on the crack path. The theoretical crack growth rates at various stress intensity factor range are discussed. Constant ${\Delta}K$ fatigue crack growth tests were performed on the structural steel, SM45C. The experimental data were analyzed to determine the autocorrelation function and Weibull distributions of the fatigue crack growth resistance. And also, the effect of the parameter m of Paris' law due to variation of fatigue crack growth resistance was discussed.

• 대한토목학회논문집
• /
• 제34권5호
• /
• pp.1409-1420
• /
• 2014

지하수위 변동 해석모델을 이용하여 제주지역의 대수층 수리지질 매개변수인 반응계수와 배수가능공극을 추정하고 고도에 따른 분포특성 및 민감도분석을 실시하였다. 대수층 매질의 특성치인 배수가능공극은 고도에 대해 일정한 경향성을 보이지 않으며 지하수의 흐름 특성치인 반응계수는 고도가 높아질수록 낮아지는 뚜렷한 경향성을 보였다. 매개변수들에 대한 민감도를 알아보기 위해 매개변수의 평균 및 관계식을 이용하여 추정함양량을 비교한 결과, 전 유역(강정천, 외도천, 천미천, 한천)에 대한 매개변수 관계식을 적용하여도 미계측 유역내 매개변수의 추정이 가능할 것으로 판단된다. 따라서 본 연구의 결과를 통해 대표적인 수리지질 매개변수의 분포특성을 파악하여 미계측지역에서 매개변수를 추정함으로써 지하수모델링의 기초자료로도 활용 가능할 것으로 기대한다.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.115-131
• /
• 2007

The electromechanical integrated toroidal drive is a new drive system. For the control of the drive, the torque fluctuation and the steady-state errors should be removed and the fast response to the input change should be achieved. In this paper, the torque fluctuation of the drive system is analyzed and expressed as Fourier series forms. The transfer function of the torque control for the drive system is derived from its electromechanical coupled dynamic equations. A 2-DOF control method is used to control the drive system. Using definite parameter relationship of the 2-DOF control system, the steady errors of the torque control for the drive system is removed. Influences of the drive parameters on the control system are investigated. Using proper drive parameters, the response time of the control system is reduced and the quick torque response of the drive system is realized. Using a compensated input voltage, the torque fluctuation of the drive system is removed as well. The compensated input voltage can be obtained from the torque fluctuation equation and the transfer function. These research results are useful for designing control system of the new drive.