• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.15-23
• /
• 1992

Neural network control has many innovative potentials for fast, accurate and intelligent adaptive control. In this paper, two kinds of neurocontrol architectures for the dynamic control of robot manipulators are developed. One is based on a System Identification and Control scheme and the other is based on the Feedback-Error leaming scheme. Both of the proposed architectures use an inverse dynamic neurocontroller in parallel with a linear neurocontroller. The difference is that the first architecture uses the system identifier to get the signals used for training neurocontrollers, while the second architecture uses a properly defined energy function. Compared with the previous types of neurocontrollers which are using an inverse dynamic neurocontroller and a fixed PD gain controller, the proposed architectures not only eliminate the painful process of the fixed gain tuning but also exhibit superior peformances because the linear neurocontroller can adapt its gains according to the applied task. This superior performance is tested and verified through computer simulation of the dynamic control of the PUMA 560 arm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.668-673
• /
• 2011

This paper presents design and control of a wheelchair robot for handicapped or elderly persons. Novel multi-functional design concepts are introduced. The first function is to balance the chair always parallel to the flat ground so that the driver feels comfortable when he/she drives on the slope. The second function is to help the driver to stand up by pushing the chair so that the driver can get out from the chair with ease. The third design is to make it foldable for easy carrying for automobiles. The last function is an immediate stop and start protection. Experimental studies are conducted to demonstrate the feasibility and functionality of each mechanical design.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.12
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.866-871
• /
• 1991

The multi-layer neural network possesses the desirable characteristics of parallel distributed processing and learning capacity, by which the uncertain variation of the parameters in the dynamically complex system can be handled adoptively. However the error back propagation algorithm that has been utilized popularly in the learning procedure of the mulfi-Jayer neural network has the significant limitations in the real application because of its slow convergence speed. In this paper, an approach to improve the convergence speed is proposed using the fuzzy logic that can effectively handle the uncertain and fuzzy informations by linguistic level. The effectiveness of the proposed algorithm is demonstrated by computer simulation of PUMA 560 robot manipulator.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.54-57
• /
• 2016

In this paper, the method for an effective and intelligent route decision of the automatic ground vehicle (AGV) using a 2D spatial map of the stereo camera system is proposed. The depth information and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the automatic moving robot and the obstacle detected and the 2D spatial map obtained from the location coordinates, and then the relative distance between the obstacle and the other objects obtained from them. The AGV moves automatically by effective and intelligent route decision using the obtained 2D spatial map. From some experiments on robot driving with 480 frames of the stereo images, it is analyzed that error ratio between the calculated and measured values of the distance between the objects is found to be very low value of 1.57% on average, respectably.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.363-363
• /
• 2000

The conventional algorithms which identify and follow a moving target using a camera located at a fixed position are not appropriate for applying to the cases o( using mobile robots, due to their long processing time. This paper proposes a new tracking algorithm based on the sensing system which uses a line light with a single camera. The algorithm categirizes the motion patterns of a pair of mobile objects into parallel, branching, and merging motion, to decide of which objects the trajectories should be calculated to follow the reference object. Kalman Filter is used to estimate the trajectories of selected objects. The proposed algorithm has shown in the experiments that the mobile robot does not miss the target in most cases.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.64-70
• /
• 2002

This paper proposes a new construction method of neural networks. The construction method consists of two fundmental ideas, which are a parallel selection-style evaluation and rules evolution. A new collision avoidance algorithm using genetic and neural network is proposed to avoid moving obstacles such as mobile robots. The input parameters of this algorithm is position of moving obstacles and target. Output is a regenerated direction of mobile robot. This algorithm is very simple and so, it is available to application of real time process. The pattern of collision avoidance is learned through test execution.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.3
• /
• pp.176-181
• /
• 2007

This paper presents evolvable neural networks based on a developmental model for navigation control of autonomous mobile robots in dynamic operating environments. Bio-inspired mechanisms have been applied to autonomous design of artificial neural networks for solving practical problems. The proposed neural network architecture is grown from an initial developmental model by a set of production rules of the L-system that are represented by the DNA coding. The L-system is based on parallel rewriting mechanism motivated by the growth models of plants. DNA coding gives an effective method of expressing general production rules. Experiments show that the evolvable neural network designed by the production rules of the L-system develops into a controller for mobile robot navigation to avoid collisions with the obstacles.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.633-640
• /
• 2022

As service robots are applied to various fields, interest in an image processing processor that can perform an image processing algorithm quickly and accurately suitable for each task is increasing. This paper introduces an image processing processor design method applicable to robots. The proposed processor consists of an AGX board, FPGA board, LiDAR-Vision board, and Backplane board. It enables the operation of CPU, GPU, and FPGA. The proposed method is verified through simulation experiments.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.4
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.