• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.56-64
• /
• 2009

This paper presents a parallel typed walking robot which can walk in omni-direction and climb from a floor to a wall. We design a six D.O.F leg mechanism composed of three legs, which form a parallel mechanism with a base and a ground to generate arbitrary poses. Optimal design is conducted to maximize the walking space and the dexterity, which are normalized by the stroke of leg. Kinematic parameters are found to maximize the weighted optimal objectives. We design a triple parallel mechanism robot by inserting Stewart platform between the upper leg mechanism and the lower leg mechanism and examine the gaits when the robot walks on the ground and climbs from a floor to a wall. The analysis of walking space and dexterity for each gait shows that the triple parallel walking robot has a large walking space with a large stability region. We explore the possibility that the robot can climb from a floor to a wall. Investigating the gaits for the six steps proves that the robot can lift the foot up to the wall by combining the orientational walking space generated by three parallel mechanisms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.296-301
• /
• 1998

In this experiments of design, vibration evaluation, and test of vehicles, aircraft, and other mechanisms the development of vibration simulator that serves environment similar to real fields takes lots of advantages. Especially, in the real field test of vehicles it possesses the advantages of showing the dynamic characteristics of the vehicle. In this study, to investigate the validity and fitness of proposed 6DOF parallel link mechanism we simulated that mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.396-399
• /
• 1995

This paper presents a new formulation of the kinematics of closed-chain mechanisms and its applications to obtaining the kinematic solutions and analyzing the singularities. Closed-chain mechanisms under consideration may have the redundancy in the number of joints. A closed-chain mechanism can be treated as the parallel connection of two open-chains with respect to a point of interest. The kinematics of a closed-chain mechanism is then obtained by imposing the kinematic constraints of the closed-chain on the kinematics of the two open-chains. First, we formulate the kinematics of a closed-chain mechanism using the kinematic constraint between the controllable active joints and the rest of joints, instead of the kinematic constraint between the two open-chains. The kinematic formulation presented in this paper is valid for closed-chain mechanisms with and without the redundancy. Next, based on the derived kinematics of a closed-chain mechanism, we provide the kinematic solutions which are more physically meaningful and less sensitive to numerical instability, and also suggest an effective way to analyze the singularities. Finally, the computational cost associated with the kinematic formulation is analyzed.

• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.881-889
• /
• 2002

Mobility analysis for various mobile mechanisms including mechanisms with lack of geometric generality is performed. Joint screws are employed to find the sire of feasible joint motion space or each of independent loops of mobile mechanisms. Particularly, the concept of "representative screws" is introduced to represent the feasible motion spaces for subsets of joints belonging to either a loop or a sub-system consisting of several closed loops. Firstly. simplified joint model for each of low different typical wheels popularly employed in mobile robots is described. Then. mobility analysis fir various types of planar mobile robots and the Mars Rover mobile robot for navigation on the rocky road on Mars arc performed. It is confirmed that the obtained results in this study coincide with the previous ones which were obtained by suing imaginary Joints approach(1)pproach(1)

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.769-777
• /
• 2016

This work focuses on current sharing between punch-through insulated gate bipolar transistors (IGBTs) connected in parallel and evaluates the mechanisms that allow overall current balancing. Two different control strategies are presented. These strategies are based on the modification of transistor gate-emitter control voltage V_GE by using an active gate driver circuit. The first strategy relies on the calculation of the average value of the current flowing through all parallel-connected IGBTs. The second strategy is proposed by the authors on the basis of a current cross reference control scheme. Finally, the simulation and experimental results of the application of the two current sharing control algorithms are presented.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.

• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.1-10
• /
• 2004

본 논문에서는 가상 구멍뚫기 작업의 표현을 위한 햅틱 렌더링 시스템을 제안하였다. 가상 모델을 만들기 위하여 영상 처리기법과 Delaunay 삼각형을 이용하였고, 실시간 어플리케이션에 적용하기 위해 간단하면서도 효율적인 후크의 법칙을 이용하여 힘을 생성하였다. 또한, 직렬형 메커니즘으로 표현하기 어려운 큰 힘을 표현하면서, 병렬형 메커니즘의 특이점 문제를 함께 해결하기 위하여 여유구동 6자유도 병렬형 메커니즘을 햅틱장치로 제안하였고 두 종류의 구멍뚫기 실험을 통하여 큰 힘을 표현할 수 있는 능력을 검증하였다.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.253-261
• /
• 2015

A parallel mechanism with redundancy can be regarded as a means for not only maximizing the benefits of parallel mechanisms but also overcoming their drawbacks. We proposed a novel parallel mechanism by eliminating an unnecessary degree of freedom of the configuration space. Because of redundancy, however, the solution for the inverse kinematics of the developed parallel mechanism is infinite. Therefore, we defined a cost function that can minimize the movement time to the target orientation and found the solution for the inverse kinematics by using a numerical method. In addition, we proposed a method for determining the boundary of the geometric singularity in order to avoid singularities.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.324-337
• /
• 1999

In this work, a new 3-PSP type spatial 3-degree-of-freedom parallel mechanism is proposed. And a 6 DOF hybrid manipulator which consists of a 3-PPR type planar 3 DOF parallel mechanism and a new 3-PSP type spatial 3-degree-of-freedom parallel mechanism is proposed. Both 3 DOF mechanism modules have closed-form forward position solutions and particularly, 3-PSP spatial module has unique forward position solution. Firstly, the closed-form position analysis and first-order kinematic analysis for the proposed 3-PSP type module are carried out, and the first-order kinematic characteristics are examined via maximum singular value and the isotropic index of the mechanism. It is shown through these analyses that the mechanism has excellent isotrpic property throughout the workspace. Secondly, position and kinematic analysis of the 3-PPR planar module are briefly described. Thirdly, the forward position analysis for the 3-PPR 3-PSP type 6 degree-of-freedom hybrid mechanism consisting of a 3-PPR planar module and a 3-PSP spatial module is performed along with the analysis of the workspace size and first-order kinematic characteristics. The kinematic characteristics of the proposed hybrid manipulator are compared to those of geometrically similar Stewart manipulator.

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
• /
• pp.241-260
• /
• 1987

The regulatory mechanisms of gene expression in higher plant were not ascertained in detail because the genome size is very large and complex. However, the above-mentioned study is remarkably progressed in parallel with development of DNA recombinant technology and plant vector system. Some research results connected with the mechanisms could be summarized as follows. 1. Many plant genes including chloroplast genes are cloned. 2. The structures of some regulatory regions of gene expression are determined, and it is confirmed that new regulatory units are made by transposable elements. 3. Plant gene expression is regulated not only at transcriptional level but also at translational level. 4. The factors that regulate plant gene expression could be divided as two categorys. One is endogenous elements including the structural change of chromatin during development stage and tissue differentiation. The other is environmental stimulations such as air, water, heat, salts and light. However, some sufficient research-aid fund is essential in order to study the regulatory mechanisms of gene expression more systematically.