• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1012-1015
• /
• 2004

There have been several kinds of attempts to actively control the deflected noise behind the noise barrier. Omoto's work in 1993 would be one of the fundamental studies, where he placed the control sources uniformly parallel to the noise barrier. Following this study, Yang pointed that the average distance between the noise source and control sources is more important than the arrangement of control sources such as a straight line or an arc type distribution. In 2004, Baek tried to show optimal arrangement of control sources while keeping the average distance between the noise source and control sources. He used simulated annealing algorithm which is one of the natural algorithms for the selections of optimal control source positions, but the searching technique was a hybrid of the simulated annealing and the sequential searching to adapt to the vast amount of searching time. This study is about the performance comparison between the pure sequential searching and the hybrid one. The simulation results show very similar performance and a pure simulated annealing searching will be more beneficial for the noise reduction performance but at the cost of computing time.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.66-71
• /
• 2021

The resonance characteristics of H-shaped metamaterials, whose widths were varied while keeping the height constant, were investigated in the terahertz (THz) frequency range. The H-shaped metamaterials were numerically analyzed in two modes in which the polarization of the incident THz electric field was either parallel or perpendicular to the width of the H-shaped structure. The resonant frequency of the metamaterial changed stably in each mode, even if only the width of the H shape was changed. The resonant frequency of the metamaterial operating in the two modes increases without significant difference regardless of the polarization of the incident electromagnetic wave as the width of the H-shaped metamaterial increases. The electric field distribution and the surface current density induced in the metamaterial in the two modes were numerically analyzed by varying the structure ratio of the metamaterial. The numerical analysis clearly revealed the cause of the change in the resonance characteristics as the width of the H-shaped metamaterial changed. The efficacy of the numerical analysis was verified experimentally using the THz-TDS (time-domain spectroscopy) system. The experimental results are consistent with the simulations, clearly demonstrating the meaningfulness of the numerical analysis of the metamaterial. The analyzed resonance properties of the H-shaped metamaterial in the THz frequency range can be applied for designing THz-tunable metamaterials and improving the sensitivity of THz sensors.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.31-37
• /
• 2018

Energy Storage System(ESS) is a system that maximizes energy efficiency by selectively storing and using the generated power when needed. Therefore, energy must be able to be charged or supplied at any time, and non-operating time should be minimized even in the case of failure or maintenance. However, current large-capacity energy storage systems must be shut down during maintenance due to structural problems. In this paper, we propose a PCS for 1MW ESS by configuring modular for large capacity ESS in parallel and verified of the hot swap technology that can replace, change, and repair the components that make up the system while keeping the system operating.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.755-764
• /
• 2004

Recently, the rapid development of biotechnology brings the explosion of biological data and biological data host. Moreover, these data are highly distributed and heterogeneous, reflecting the distribution and heterogeneity of the Molecular Biology research community. As a consequence, the integration and interoperability of molecular biology databases are issue of considerable importance. But, up to now, most of the integrated systems such as link based system, data warehouse based system have many problems which are keeping the data up to date when the schema and data of the data source are changed. For this reason, the integrated system using web service technology that allow biological data to be fully exploited have been proposed. In this paper, we built the integrated system if the bio sequence information bated on the web service technology. The developed system allows users to get data with many format such as BSML, GenBank, Fasta to traverse disparate data resources. Also, it has better retrieval performance because the retrieval modules of the external database proceed in parallel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.862-869
• /
• 2000

In a switch routing system, buffers are indispensible to prevent signal collision during routing process. For a photonic switching system, optical buffers are also indispensible if the system requires an active routing rather than a simple optical cross-connect(OXC). To cope with WDM technologies in optical comminication systems in these days, photonic switching system also has to deal with WDM signals. Therefore, optical buffers needed in a switching system has to be routed to the same output. For the receiver to recognize these signals separately, parallel WDM signals during rearrangement process. In this paper, we propose a novel all optical WDM output buffer whose structure, hardware, SNR and BER characteristics are improved a lot comparing with those of previously reported ones. From the analysis of the proposed buffer, the new buffer can hold 255 WDM cells keeping BER of 10-9 as long as a contrast ratio(gain on-off ratio) of optical gate(semiconductor optical amplifier) nside the buffer is 30dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.59-70
• /
• 2007

In this paper, we proposed an effective T&L(Transform & Lighting) Processor architecture for a real time 3D graphics acceleration SoC(System on a Chip) in a mobile system. We designed Floating point arithmetic IPs for a T&L processor. And we verified IPs using a SoC Platform. Designed T&L Processor consists of 24 bit floating point data format and 16 bit fixed point data format, and supports the pipeline keeping the balance between Transform process and Lighting process using a parallel computation of 3D graphics. The delay of pipeline processing only Transform operation is almost same as the delay processing both Transform operation and Lighting operation. Designed T&L Processor is implemented and verified using a SoC Platform. The T&L Processor operates at 80MHz frequency in Xilinx-Virtex4 FPGA. The processing speed is measured at the rate of 20M Vertexes/sec.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.51-59
• /
• 2003

It is effective to be located in the double nodes in the distributed object replication systems, then object which nodes share is the same contents. The nodes store an access information on their local cache as it access to the system. and then the nodes fetch and use it, when it needed. But with time the coherence Problems will happen because a data carl be updated by other nodes. So keeping the coherence of the system we need a mechanism that we managed the to improve to improve the performance and availability of the system effectively. In this paper to keep coherence in the shared memory condition, we can set the limited parallel performance without the additional cost except the coherence cost using it to keep the object at the proposed adaptive duplication object(ADO) algorithms. Also to minimize the coherence maintenance cost which is the bi99est overhead in the duplication method, we must manage the object effectively for the number of replication and location of the object replica which is the most important points, and then it determines the cos. And that we must study the adaptive duplication object management mechanism which will improve the entire run time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.276-279
• /
• 2004

Plasma enhanced chemical vapor deposition (PECVD) of silicon nitride (SiN) is a proven technique for obtaining layers that meet the needs of surface passivation and anti-reflection coating. In addition, the deposition process appears to provoke bulk passivation as well due to diffusion of atomic hydrogen. This bulk passivation is an important advantage of PECVD deposition when compared to the conventional CVD techniques. A further advantage of PECVD is that the process takes place at a relatively low temperature of 300t, keeping the total thermal budget of the cell processing to a minimum. In this work SiN deposition was performed using a horizontal PECVD reactor system consisting of a long horizontal quartz tube that was radiantly heated. Special and long rectangular graphite plates served as both the electrodes to establish the plasma and holders of the wafers. The electrode configuration was designed to provide a uniform plasma environment for each wafer and to ensure the film uniformity. These horizontally oriented graphite electrodes were stacked parallel to one another, side by side, with alternating plates serving as power and ground electrodes for the RF power supply. The plasma was formed in the space between each pair of plates. Also this paper deals with the fabrication of multicrystalline silicon solar cells with PECVD SiN layers combined with high-throughput screen printing and RTP firing. Using this sequence we were able to obtain solar cells with an efficiency of 14% for polished multi crystalline Si wafers of size 125 m square.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.420-425
• /
• 1999

The maximum demand controller is an electrical equipment installed at the consumer side of power system for monitoring the electrical energy consumed during every integrating period and preventing the target maximum demand (MD) being exceeded by disconnecting sheddable loads. By avoiding the peak loads and spreading the energy requirement the controller contributes to maximizing the utility factor of the generator systems. It results in not only saving the energy but also reducing the budget for constructing the natural base facilities by keeping thc number of generating plants ~ninimumT. he conventional MD controllers often bring about the large number of control actions during the every inteyating period and/or undesirable loaddisconnecting operations during the beginning stage of the integrating period. These make the users aviod the MD controllers. In this paper. fuzzy control technique is used to get around the disadvantages of the conventional MD control system. The proposed MD controller consists of the predictor module and the fuzzy MD control module. The proposed forecasting method uses the SOFM neural network model, differently from time series analysis, and thus it has inherent advantages of neural network such as parallel processing, generalization and robustness. The MD fuzzy controller determines the sensitivity of control action based on the time closed to the end of the integrating period and the urgency of the load interrupting action along the predicted demand reaching the target. The experimental results show that the proposed method has more accurate forecastinglcontrol performance than the previous methods.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1183-1194
• /
• 2004

Network partitioning problem is to partition a network into multiple blocks such that the size of cutset is minimized while keeping the block sizes balanced. Among these, iterative algorithms are regarded as simple and efficient which are based on cell move of Fiduccia and Mattheyses algorithm, Sanchis algorithm, or Kernighan and Lin algorithm. All these algorithms stipulate balanced block size as a constraint that should be satisfied, which makes a cell movement be inefficient. Park and Park introduced a balancing coefficient R by which the block size balance is considered as a part of partitioning cost, not as a constraint. However, Park and Park's algorithm has a square time complexity with respect to the number of cells. In this paper, we proposed Bucket algorithm that has a linear time complexity with respect to the number of cells, while taking advantage of the balancing coefficient. Reducing time complexity is made possible by a simple observation that balancing cost does not vary so much when a cell moves. Bucket data structure is used to maintain partitioning cost efficiently. Experimental results for MCNC test sets show that cutset size of proposed algorithm is 63.33% 92.38% of that of Sanchis algorithm while our algorithm satisfies predefined balancing constraints and acceptable execution time.