• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1481-1484
• /
• 1997

The vehicle driving simulator expects vehicle motion with real-time simulation arise from driver's steering, accelerating, stopping and simulates motion of vehicl with visula, audio and washout algorithm. And it gives a vivid feeling to driver in reality. Vehicle driving simulator with vehicle integration control system is used for analysis of analysis of vehicle controllaility, steering capacity and safety in various pseudo environment alike. basides, it analyzeds vehicle safety factor dirver's reaction and promotes traffic safety without driver's own risks. The main proceduress of development of the vehicle driving simulator are classified by 3 parts. first the motion base system which can be generated by the motion queues, should be developed. Secondly, real-time vehicle software which can afford the vehicle dynamics, might be constructed. The third procedure is the integration of vehicle driing simulator which can be interconnected between visual systems with motion base. In this study, we are to study of the motion base for a vehicle driving simulator design and that of its real time control and using an extra gyro sensor and accelerometers to find a position and an orientatiion of the moving platform except for calculating forward kinematics. To drive the motion base, we use National Instruments corp's Labview software. Furthemore, we use analysis module for the vehicle motionand the washout algorithm module to consummate driving simulator, which can be driven by human in reality, so we are doing experimentally process about various vehicle motion conditon.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.1
• /
• pp.39-49
• /
• 2018

Purpose - This present aims to analyze the effect of export modes on initial export amount and time to export by selecting export modes among various success strategies and factors. Research design, data, and methodology - It surveyed 980 small and mid-sized venture enterprises across Korea. The export modes and its impact on exports through frequency analysis and cross analysis, and validated through a PPML(regression analysis applied the enterprise growth model) analysis. Results - Five export modes were investigated : direct export, indirect export, transfer from direct export to indirect export, transfer from direct export to indirect export, and parallel export to indirect export. It was found that SMVEs that exported directly from establishment to initial export had the shortest period, and also had the highest export price Conclusions - From a marketing point of view, it took an average of 1.6 years to switch from export directly to indirect export or directly export, and the reason for the export modes conversion was to supplement export specialists and improve export competitiveness. And the export amount and time period that SMVEs establishes and export is a significant factor in export success strategy and there has been few prior study in export modes.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.210-220
• /
• 2002

We analysised the effect of harmonics on electric machines of substation power system barred on quantitatively measured harmonics and proposed the methods for prevention of harmonics through checking on transformer, rectifier and cable's capacities against harmonics with reference to KEPCO's electricity service standard. In order to analysis harmoninics of silicon rectifier that is power source in DC substation, computer simulations for a substation with TR of high voltage distribution switchboard are performed. Simulation results show that the total harmonic distortion factor becomes smaller for TR primary and receiving points in order rather than silicon rectifier which is harmonic generation source so that the harmonics generated frets each rectifier are outflowed to power supply and high voltage distribution switchboard The result of higher distortion factors of voltage and current for rectifier with 100% load than those with 50 % and 30% indicates that the waveform of voltage and current for the real substation power system at the office-going and the closing hours with heavy loads might be more distorted. As proposed methods for harmonic reduction, the conventional 6 pulse-type for substation is required to be replaced by 12 pulse-type for reduction of 5th and 7th harmonics. The active filter rather than the passive filter is more effective due to severe variance of rectifier loads, but the high cost is price to be paid. In view of installation area and costs, the use of 12 pulse-type transformer is desirable and then the parallel transformer and the rectifier within the substation must be replaced at the same time. Other substations with parallel feeder can use 6 pulse-type transformer.

• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.19-25
• /
• 1980

The Occupational Job Stress Indicies Questionnaire is a selfadministered instrument consisting of 48 questions which are designed to collect the perceived Job stress about individual. This questionnaire was translated into Korean and applied to the selected groups of 300 blue collar workers musical manufacture industy for the purpose of assessing the it's reliability from April 1. to July 30, 1980. The results obtained were as follows; 1. The range of reliability coefficients for all indices was. 45-.75 which was lower than .54-.87 of original. 2. The inter-item correlation matrix for all items comprising an index along with the intercorrelation of these items with the items comprising closely related indices. 3. The reliability of JOB SATISFACTION, INTRINSIC REWARDS and IMPORTANCE REWARDS revealed .14-.20 lower than that of original. On the point of view, some items should be adjusted in parallel with acutual situation of Korea through making a cultural comparative study and item factor analysis.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2011

The hydraulic part in reactor coolant pump consists of suction nozzle, impeller, diffuser, and discharge nozzle. Among them, impeller is required to be designed to satisfy performance requirements such as head, NPSHR, and head curve slope at design point. Present study is intended to suggest the preliminary design method sizing the impeller size to satisfy the design requirement particularly including head curve slope at design point. On a basis of preliminary design result, hydraulic components have been designed in detail by CFD and then manufactured in a reduced scale. Experiment in parallel with computational analysis has been executed in order to confirm the hydraulic performance. Comparison results show good agreement with design result, confirming the validity of design method suggested in this study.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.3
• /
• pp.30-34
• /
• 2006

We investigated fatigue crack growth behavior in laser-welded sheet metal caused by a single applied overload The fatigue specimens were made using butt jointed cold rolled sheet metal that was welded with a $CO_2$ laser, The effects of the specimen thickness and overload ratio were determined from fatigue crack propagation tests, These tests were performed in such a way that the fatigue loading was aligned parallel to the weld line while the crack propagated perpendicular to the weld line, Overload ratios of 1.0, 1.5, and 2. 0 were applied near the tip of the fatigue crack at points located 6, 4, and 2 mm from the weld line. The specimens were either 0.9 or 2.0 mm thick. The size of the plastic zone at the crack tip due to the single applied overload was also determined using finite element analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2843-2853
• /
• 1996

The multi-point procedure is developed to predict the shape change of a semi-elliptical surface crack during stable fatigue crack growth. 3-D stress intensity factors along a crack front are calculated using the simplified 3-D J-intergral. Crack growth rate coefficient in the Paris law is assumed to be constant along the crack growth. Crack growth rate is set to be the distance between the two parallel tangent lines on the two semi-elliptic crack fronts before and after crack growth.

• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.378-390
• /
• 2010

From the perspective of employees working for public service agencies, we analyzed the causal relationship between service quality, relationship quality, design quality, customer satisfaction, and trust in public services. We conduct statistical analyses on the quality attributes we derived from a critical incident technique(CIT) analysis and build a measurement model, which has a second-order hierarchical structure. Survey data was collected from social work, childcare, and healthcare services. Using a structural equation modeling method, we identify a causal model and simultaneously estimate factor loadings and path coefficients. We find that all the quality dimensions are antecedents to satisfaction and then satisfaction precedes trust. The results show that service quality and design quality mediate in parallel the effect of relationship quality on satisfaction and both relationship and design qualities have stronger effects on satisfaction rather than service quality.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.625-635
• /
• 1989

Mixed mode fracture problem is analyzed for the finite orthotropic plate where an inclined crack parallel to the fiber direction is centrally placed. Modified mapping collocation method with both uniform stress and uniform displacement boundary conditions is utilized to calculate stress intensity correction factors for glass/epoxy and graphite/epoxy composites. Computed results are presented for selected combinations of crack length to width ratio L/W and plate aspect ratio H/W with various fiber orientations.