• 한국응용곤충학회지
• /
• 제24권1호
• /
• pp.39-44
• /
• 1985

토양(土壤) 중(中)의 식물기주선충(植物寄株線蟲)을 체법(法)과 깔대기법(法)을 병용(竝用)하여 분리(分離)할 때 사용(使用)되는 선충분리용(線蟲分離用) 여과지(據過紙)를 선발(選拔)키 위(爲)하여 시판(市販)되고 있는 화장지(化粧紙) 중(中)에서 국내(國內) 5개(個) 회사(會社) 10개(個) 제품(製品)과 화란에서 선충분리용(線蟲分離用)으로 제작(製作)된 Cotton-wool Nematode Filter와 비교(比較)하여 분리율(分離率)을 조사(調査)하였고 온도(溫度) 및 시간(時間) 별(別)로 선충분리율(線蟲分離率)을 조사(調査)하였던 바 다음과 같은 결과(結果)를 얻었기에 보고(報告)한다. 1. 시판(市販) 화장지(化粧紙)의 선충분리율(線蟲分離率)은 2매(枚) 사용(使用) 시(時)는 Champ Sapphire, Crown Hankie, Scotties Bird 등(等) 3종(種)은 토양(土壤) 200ml당(當) 선충분리수(線蟲分離數)가 453, 419, 312마리로 Nematode Filter의 227마리에 비(比)하여 분리율(分離率)이 월등(越等)히 높았으며 1% 수준(水準)에서 유의성(有意性)이 인정(認定)되었으나 Clarity가 E급(級)으로 흐려서 검경(檢鏡)이 곤란(困難)하였다. 그리고 Monaliza Finely Soft와 Crown Table Napkin은 선충분리수(線蟲分離數)가 175, 193마리로 Nematode Filter에 비(比)하여 약간 낮았으나 Clarity는 C급(級)으로 나타났고 Kleenex New Softness는 240마리로 분리율(分離率)은 높게 나타났으나 Clarity가 C급(級)이며 강도(强度)가 약(弱)하였다. 4매(枚) 사용(使用) 시(時)는 Champ Sapphire, Crown Hankie, Scotties Bird. Beau Clean Silvia, Kleenex New Softness, Monaliza Finely Soft등(等) 6종(種)이 비교적(比較的) 분리율(分離率)이 높았다. 그 중(中)에서 Champ Sapphire는 219마리로 Nematode Filter와 분리율(分離率)이 비슷하였으나 Clarity가 C급(級)이며 강도(强度)가 약(弱)하여 잘 찢어지므로 사용(使用)이 불편(不便)하였고 Crown Hankie는 198마리로 Nematode Filter에 비(比)하여 분리율(分離率)이 다소(多少) 낮게 나타났으나 Clarity가 B급(級)이며 강도(强度)도 강(强)하게 나타났으므로 국내(國內)에 시판(市販) 중(中)인 화장지(化粧紙) 중(中)에서 선충분리용(線蟲分離用) 여과지(濾過紙)로는 Crown Hankie 4매(枚) 사용(使用)이 가장 적합(適合)한 것으로 사료(思料)된다. 2. 토성(土性)에 따른 선충분리율(線蟲分離率)은 Loamy sand, Sandy loam, Clay loam 공(共)히 Champ Sapphire가 가장 분리율(分離率)이 높았고 Crown Hankie, Beau Clean Silvia 등(等)의 순(順)이었다. 3. 향수(香水) 처리(處理)되지 않은 화장지(化粧紙)는 향수(香水) 처리(處理)된 화장지(化粧紙)에 비(比)하여 Kleenex New Softness는 53% 더 높은 분리율(分離率)을 보였고 Monaliza Finely Soft는 23% 더 높은 분리율을 나타냈으므로 선충분리용(線蟲分離用)으로는 향수처리(香水處理)되지 않은 것이 더 좋은 것으로 사료(思料)된다. 4. 온도별(溫度別) 선충분리율(線蟲分離率)을 $15^{\circ},\;25^{\circ}\;and\;35^{\circ}C$에서 조사(調査)한 결과(結果) 전체적(全體的)으로 $35^{\circ}C$에서 분리율(分離率)이 가장 높게 나타났다. 5. 시간경과(時間經過)에 따른 선충분리율(線蟲分離率)은 12시간(時間) 후(後)가 35.3 %이고 24시간(時間) 후(後)가 40.3%로 가장 높게 나다났다가 36시간(時間) 이후(以後)부터는 분리율(分離率)이 급격(急激)히 감소(減少)되었다. 그러므로 선충분리(線蟲分離) 시간(時間)은 $12{\sim}24$시간(時間)이 가장 적합(適合)한 것으로 사료(思料)된다.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.191-200
• /
• 2017

적정포장설계는 포장 원자재 사용량 및 폐기물 발생량뿐만 아니라 재료비 및 물류비 절감이 가능하여 포장재의 환경성과 경제성을 모두 충족시킨다. 유한요소해석은 구조해석, 열전달, 유체운동, 전자기 등 다양한 분야에 유용한 도구로 적용되고 있지만, 포장분야에서는 그 적용이 미비하다. 이에 따라 포장분야에 유한요소해석 적용은 컴퓨터 시뮬레이션으로 포장 설계가 가능하기 때문에 향후 연구에 있어 비용과 시간 절약이 가능하며 적정포장설계를 통해 포장 폐기물과 물류비 절감이 가능할 것으로 판단된다. 따라서 본 연구에서는 향후 포장분야에서 유한요소해석(FEM) 프로그램을 활용한 연구 설계에 도움이 되고자 하는 목적으로 국내에서 발표된 유한요소해석 관련 논문을 조사하였다. 1991년부터 2017년까지의 국내 학술지 및 학위논문에 게재된 유한요소해석 관련 논문 중 포장과 직접적인 연관성이 있다고 판단된 32편의 논문을 분석하여 연구의 동향을 살펴보았다. 그 결과 각 논문을 사용한 연구주제 및 내용, 유한요소해석 프로그램, 해석방법 등으로 분석하고 향후 포장분야에 활용할 수 있는 방향에 대하여 제시하였다. 포장 영역에 유한요소해석의 적용은 포장재에 가해지는 응력 및 진동해석을 통해 구조변경 및 두께 감량을 가능하게 하고 이에 따라 기계적 강도 향상 및 포장소재 사용량 감소를 통해 적정포장설계로 원가 절감이 가능할 것으로 판단된다. 따라서 향후 포장 분야의 연구에 있어, 유한요소해석을 함께 병행한다면 경제적이고 합리적인 포장 설계를 할 수 있을 것으로 판단된다.

• 한국통신학회논문지
• /
• 제28권6C호
• /
• pp.648-658
• /
• 2003

영상/비디오 컨텐츠의 사용이 급증함에 따라 유료 및 비밀유지를 필요로 하는 영상데이터에 대한 보안문제가 크게 대두되고 있다. 본 논문에서는 영상데이터를 숨기기 위한 영상 암호화 방식을 제안하였다. 이 방법은 웨이블릿 영역에서 양자화과정을 마친 영상 데이터를 대상으로 한다. 본 논문은 영상의 전체데이터가 아닌 부분데이터를 암호화하는 방식을 사용하는데, 세 가지 형태의 부분데이터 추출방식을 사용하였다. 먼저, 웨이블릿 변환이 원영상을 주파수 대역으로 재편성함을 이용하여 영상정보 중 특정 주파수를 숨김으로서 전체 영상을 인식할 수 없도록 하였다. 각 화소를 나타내는 데이터에서도 모든 데이터를 사용하지 않고 MSB만을 선택하여 암호화 대상에 포함시켰다. 마지막으로 특정 부대역의 화소들을 무작위로 선택하였으며, 이 때 선형귀환 시프트 레지스터(Linear Feedback Shift Register, LFSR)를 사용하였다. LFSR의 초기값과 출력비트의 선택에 있어서 암호화키의 일부분을 사용함으로써 암호화 강도를 더욱 높였다. 제안한 방법을 소프트웨어로 구현하여 약 500개의 영상을 대상으로 실험한 결과 원영상 데이터의 약 1/1000의 데이터 양을 암호화함으로써 원영상을 인식할 수 없을 정도의 암호화효과를 얻을 수 있음을 알 수 있었다. 따라서 제안한 방법은 작은 양의 암호화로 효과적으로 영상을 숨기는 방법임을 확인할 수 있었다. 본 논문에서는 부대역의 선택과 LFSR 출력 중 사용비트의 양에 따른 여러 방식을 제안하였으며, 이들의 암호화 수행시간과 암호화효과 사이에 상보적인 관계가 있음을 보여, 적용분야에 따라 선택적으로 사용할 수 있음을 보였다. 또한 본 논문의 방식들은 응용계층에서 수행되는 것으로, 현재 유·무선 통합 네트워크의 중요한 문제로 대두되고 있는 끝과 끝 (end-to-end)의 보안에 대한 좋은 해결방법으로 사용될 수 있으리라 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 동의생리병리학회지
• /
• 제16권1호
• /
• pp.32-44
• /
• 2002

Gu-Chang is a disorder characterized by recurring ulcers confined to the oral mucosa. Despite much clinical and research attention, the causes remain poorly understood. In this paper, we will compare Gu-Chang with Recurrent Aphthous Stomatitis(RAS) in order to know what is the similiarity between Gu-Chang and RAS. So we will arrange various oriental and western medical literatures which are important. As a result of arrangement of the causes, symptoms and therapys of Gu-Chang, we can conclude through the studies as follows. 1. The etiologies of Gu-chang are following. In the Sthenia syndrome, there are evil heat of external factor, heat of heart and spleen, insomnia, heat of upper warmer, stress and diet, heat of lung and heart, excessive heat of upper warmer, inappropriate food intake, heat conveyance of organ, heat of stomach merdian, moistured heat of spleen and stomach and stasis of liver energy. In the Asthenia syndrome, there are deficiency of stomach energy, deficiency of upper warmer leading to heat, deficiency of middle warmer leading to cold, deficiency of lower warmer leading to heat, deficiency of middle energy, deficiency of blood, decreased fire and deficiency of soil, yin fire of lower warmer, deficiency of heart yin, deficiency of spleen yin and deficiency of qi and blood. 2. In western medicine the causes of RAS is presumed as local, microbial, systemic, nutritional, genetic, immunologic factors. 3. Once Gu-chang is compared with RAS, in the deficiency of yin leading to hyperactivity of fire, deficiency of yin leading to floating of fire and stasis of liver energy, recurring of Gu-chang is similar to RAS. Although recurring of Gu-chang due to tripple warmer of excessive fire has no recurrance, since there are the degree of Pain, site of lesion, dysphagia etc, it is similar to major RAS. It is may be believed that Sthenia Gu-chang is similar to major RAS, shape of recurring, site of lesion, degrree of Pain and white color of Asthenia Gu-chang are similar to minor RAS, but there is no similarity concerning herpes RAS in the literatures that describe the symptoms. 4. Generally, the treatment of Gu-chang is divided into Asthenia and Sthenia Syndrome. The method of cure to Sthenia syndrome is heat cleaning and purge fire, Asthenia syndrome is nourish yin to lower and adverse rising energy and strength the middle warmer and benefit vital energy. 5. Following is the medication for Sthenia syndrome. Heat of heart and spleen is Do Jok San, Yang Gyek San, Juk Yup Suk Go Tang, evil heat of external factor is Yang Gyek San Ga Gam, Stasis of liver energy is Chong Wi Fae Dok Yum, moistured heat of spleen and stomach is Chong Gi Sam Syep Tang. The medication for Asthenia Syndrome is following. Deficiency of upper warmer leading to heat is Bo Jung Ik Gi Tang, deficiency of middle warmer leading to cold is Bu Ja Lee Jung Tang, deficiency of lower warmer leading to heat is Yuk Mi Ji Hwang Tang, deficiency of yin leading to hyperactivity of fire is Ji Baek Ji Hwang Hwan, deficiency of yin leading to floating of fire is Lee Jung Tang Ga Bu Ja Medicine for external use were Yang Suk San, Boo Wyen San, Rok Po San, Yoo Hwa San ate. 6. In western medicine, there is no specific treatment for RAS, and management strategies depend on dinical presentation and symptoms and includes antibiotics, oral rinses, glucocorticoids, immunomodulatory drugs, vitamines, analgesics, laser and antiviral agents.

• 한국과학교육학회지
• /
• 제22권1호
• /
• pp.190-203
• /
• 2002

이 연구의 목적은 포트폴리오 평가의 내용 타당도를 검증하고 학생 포트폴리오에서 파악할 수 있는 정보의 유형을 조사하는 것이다. 내용 타당도를 각 차시의 목적과 교육과정의 중점에 비추어 검증하였으며, 학생 포트폴리오를 분석하여 어떤 정보를 파악할 수 있는지 분석하였다. 분석에 사용한 학생 포트폴리오는 경기도 평택시 A 초등학교 4학년 한 학급에서 실시한 것이다. 포트폴리오에는 4학년 2학기 지층과 화석, 열과 물체의 변화단원 내용이 포함되어 있다. 4학년 교과서, 실험관찰, 교사용 지도서 역시 분석되었으며, 그 결과는 학생 포트폴리오에서 파악한 정보와 비교하였다. 과학교육전문가 2인과 10명의 현직 초등 교사가 분석에 참여하였다. 연구 결과 포트폴리오 평가 양식과 교육과정 및 교과서 내용은 $70\sim100%$ 범위의 일치도를 보였다 교육과정 중점과 비교할 때는 90% 이상의 일치도를 나타냈다. 학생 포트폴리오는 이해, 관찰, 의욕, 학습의 과정에 대한 정보를 많이 포함하고 있었으며, 결론도출, 의사소통, 자기 주도, 학습의 진전, 자기 개념, 상호작용, 학습의 과정에 대한 정보도 상당히 포함하고 있는 것으로 나타났다. 전체적으로 볼 때 학생 포트폴리오와 교과서의 정보는 거의 비슷한 수준을 보였다. 다만 예상, 의욕, 자기 주도, 상호 작용과 같은 정보는 학생 포트폴리오에 더 많이 포함되어 있었으며, 관찰이나 실험 계획에 대한 정보는 과학교과서에서 상대적으로 더 많이 포함하고 있는 것으로 나타났다. 연구 대상 포트폴리오 평가 양식은 타당도가 높으며, 지필 검사로는 얻을 수 없는 다양하고 풍부한 정보를 포함하고 있었다. 학생 포트폴리오에서 얻은 정보를 잘 활용하면 학생들의 학습과 장점에 대한 깊은 이해를 할 수 있고, 이를 바탕으로 학생들의 과학 학습을 크게 향상시킬 수 있을 것으로 기대된다.

• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.11-21
• /
• 2015

Human-Computer Interaction(HCI)에 대한 관심도가 높이지면서, HCI에 대한 연구도 활발히 진행되고 있다. 이와 더불어 사용자의 몸짓이나 음성을 이용하는 Natural User Interface/Natural User eXperience(NUI/NUX)에 대한 연구도 활발히 진행되고 있다. NUI/NUX의 경우, 제스처 인식이나 음성 인식 등의 인식 알고리즘이 필요하다. 하지만 이러한 인식 알고리즘은 전처리, 정규화, 특징 추출과 같은 단계를 거쳐야하기 때문에 구현이 복잡하고, 트레이닝에 많은 시간을 투자해야 한다는 단점이 있다. 최근에는 NUI/NUX 개발 도구로 Microsoft 사의 Kinect가 개발되어 개발자와 일반인들에게 많은 관심을 받고 있고, 이를 이용한 다양한 연구가 진행 중에 있다. 본 저자들의 이전 연구에서도 사용자의 신체적 특징을 이용하여 뛰어난 직관성을 가진 핸드 마우스를 구현하였다. 하지만 마우스의 움직임이 부자연스럽고 정확도가 낮아 사용자가 사용하기 다소 어려웠다는 단점이 있다. 본 연구에서는 Kinect를 통해 사용자의 신체적 특징을 실시간으로 추출하고, 이를 이용해 가상 모니터라는 새로운 개념을 추가한 핸드 마우스 인터페이스를 설계하고 구현하였다. 가상 모니터는 사용자의 손으로 마우스를 제어할 수 있는 가상의 공간을 의미한다. 이를 통해 가상 모니터 상의 손의 좌표를 실제 모니터 상의 좌표로 정확하게 매핑(mapping)이 가능하다. 가상 모니터를 사용함으로써 이전 연구의 장점인 직관성을 유지하고, 단점인 정확도를 높일 수 있다. 추가적으로 뇌파 집중 지표를 이용해 사용자의 불필요한 행동을 인식하여 핸드 마우스 인터페이스의 정확도를 높였다. 제안하는 핸드 마우스의 직관성과 정확성을 평가하기 위하여 10대부터 50대까지 50명에게 실험을 하였다. 직관성 실험 결과로 84%가 1분 이내에 사용방법을 터득하였다. 또한 동일한 피실험자에게 일반적인 마우스 기능(드래그, 클릭, 더블클릭)에 대해 정확성 실험을 한 결과로 드래그 80.9%, 클릭 80%, 더블 클릭 76.7%의 정확성을 보였다. 실험 결과를 통해 제안하는 핸드 마우스 인터페이스의 직관성과 정확성을 확인하였으며, 미래에 손으로 시스템이나 소프트웨어를 제어하는 인터페이스의 좋은 예시가 될 것으로 기대된다.

• 한국강구조학회 논문집
• /
• 제29권2호
• /
• pp.111-122
• /
• 2017

본 연구에서는 1900mm급의 춤이 깊은 콘크리트 채움 U형 메가 합성보의 합성보통모멘트골조에 대한 적용성을 검토하였다. 대형 합성보의 실물대 내진성능실험에 대한 현실적 제약으로 인하여 작은 규모의 실험체에 대해 수행된 기존 실험결과의 분석과 수치해석연구의 보완을 통해 연구를 수행하였다. 이러한 형태의 합성보는 부모멘트 작용시의 웨브국부좌굴이 가장 중요하므로 선행 실물대 실험결과로부터 웨브의 판폭두께비와 층간변형능력 사이의 관계를 분석하였다. 그 결과, 25mm 두께의 U형 강재단면을 지닌 1900mm급의 대형 합성보라 하더라도 층간변위각 2% 이후 웨브국부좌굴을 경험하고 3% 이후 최대변형에 도달하는 것으로 확인되었다. 이는 합성보통모멘트골조의 요구조건을 상회하는 것으로 AISC 기준에 따른 웨브 판폭두께비 제한이 본 연구의 U형 단면에는 보수적임을 시사하기도 한다. 유한요소해석을 통해서는 합성보의 휨성능 및 웨브국부좌굴에 대한 수평스티프너의 영향을 분석하였다. 대형 합성보는 스티프너 보강과 관련없이 부모멘트 방향으로 공칭소성모멘트 이상의 휨성능을 발휘하였으며, 스티프너를 보강할 경우에는 웨브국부좌굴이 상당히 지연되는 긍정적인 효과가 있었다. 이상의 실험결과 분석 및 해석연구에 의하면 1900mm급의 춤이 깊은 콘크리트 채움 U형 메가 합성보는 합성보통모멘트골조에 보수적으로 적용가능한 것으로 판단된다.

• 수산해양기술연구
• /
• 제38권3호
• /
• pp.181-189
• /
• 2002

한국의 DGPS 측위정도와 복수 기준국을 이용하였을 때의 측위정도를 연구하기 위하여 2001년 1월부터 10 월까지 해상용 DGPS수신기(MGP-100D, GP-36) 를 이용하여 여수, 부산의 고정점에서 정점관측을 행하였으며, 측위정도의 변화를 조사하기 위해 부경대학교 내의 회류 수조에서 2001년 10월 15일~22 일까지 일주일 동안 관측을 행하였다. 또한 DGPS 기준국의 유효 이용범위에 대해 조사하기 위해 2001년 1월 9일~18일 사이에 한국남해안을 항해, 정박하면서 실험을 행하였으며, 그 결과를 요약하면 다음과 같다. (1) 단일 기준국을 이용하였을 때의 2drms 와 기준점으로부터 평균위치까지의 편위거리는 각각 5.6m, 7.3m 이었고, 실제 위치로부터 한쪽 방향으로 편향되어 나타났다. (2) 복수 기준국을 이용하여 산술평균하였을 때의 2drms와 기준점으로부터 평균위치까지의 편위거리는 각각 5.5m, 3.2m 이었고, 가중평균 하였을 때의 2drms와 기준점으로부터 평균위치까지의 편위거리는 각각 5.3m. 3.8m 이었다. 또한 사용자가 기준국으로부터 멀어질수록 복수 기준국을 이용하는 쪽이 측위정도가 더 향상되는 것으로 나타났다. (3) 측위오차 일변화는 16~22시 사이에 증가하였고, 관측된 평균 위성 수와 HDOP는 각각 7.lm, 0.49이었다. (4) 한국 남해안을 항해하며 DGPS 기준국의 유효범위를 조사한 결과. 1l0nm인 것으로 나타났으며, 신호강도는 19㏈ 이하, 신호 대 잡음비 8㏈ 이하에서는 기준국 보정정보를 이용할 수 없었다. 이와 같이 한국 남해안 일대에서의 측위 실험결과 복수 기준국을 이용하는 것이 단일 기준국을 이용하는 것보다 측위정도가 더 개선되는 것으로 나타났으며, 기선장이 길수록 복수 기준국을 이용하는 쪽이 더 양호한 정도를 나타내었다.