• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.59-62
• /
• 1999

After reported that Styrene dimer and Styrene trimer was Endocrine Disrupter, if it was a fact or not, the sales of PSP noodle cup was rapidly decreased and social responsibilities of the substitution materials development was raised. Therefore we had studied many materials like paper, pulp mold, PP injection molding, PP lamination, etc as substitution materials and selected paper cup which was safe in many sides and easy to recycle. Mainly we had checked the shape, safety, stability and recycling possibility of paper cup and secured many data which could prove them.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2521-2524
• /
• 2002

In this paper, We propose an Image processing algorithm for a paper-cup inner defect inspection. First, we devide a cup image to four sections considering the characteristic of a cup and filter noises limit by using the flood-fill algorithm and median filter. Second, to obtain the clearer inspection result of the edge point inner cup, We apply the sharpening convolution filer to the objected inspect the edge points by using the LOG edge detector. Third, executing sub-pixel operation with the orignal image, we find the defect parts in the cup. Finally, denoting the inspected defect parts as rectangular, we recompose the images of the defected ones.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.430-434
• /
• 2013

In this paper, we have investigated deformation of cup for EFI detonator in high velocity impact test. The experimental result shows that STS cup deformed 0.170 mm with the bulged shape. The numerical simulation result with static/dynamic material properties of SUS304 shows 0.166 mm of deformation. The main parameters to decrease the deformation of cup are stength, thickness and density of cup. The initial condition of SUS304 cup was strength of 215 MPa and thickness of 0.12 mm. As strength increases to 500 MPa, deformation of cup converges to 0 mm, and as thickness increases to 0.18 mm, deformation of cup converges to 0 mm. If the density of cup decreases from 8 to 2.7 g/cc, the deformation of cup decreases to 0.141 mm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.5
• /
• pp.37-47
• /
• 2019

Recently, as demand for various paper containers has rapidly grown, it is inevitable that paper cup-forming machines have increased their manufacturing speed. However, the faster manufacturing speed naturally brings more frequent manufacturing failures, which decreases manufacturing efficiency. As such, it is necessary to develop a system that monitors the failures in real time and diagnoses the failure progress in advance. In this research, a paper cup-forming machine diagnosis system was developed. Three major failure targets, paper deviation, temperature failure, and abnormal vibration, which dominantly affect the manufacturing process when they occur, were monitored and diagnosed. To evaluate the developed diagnosis system, extensive experiments were performed with the actual data gathered from the paper cup-forming machine. Furthermore, the desired system validation was obtained. The proposed system is expected to anticipate and prevent serious promising failures in advance and lower the final defect rate considerably.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.42-47
• /
• 2009

The flash point and the AIT(auto-ignition temperature) are the most important combustible properties used to determine the potential for the fire and explosion hazards of flammable material. In order to know the accuracy of data in MSDS(Material Safety Data Sheet), the flash point of n-acids were measured by using Pensky-Martens closed cup tester(ASTM D93), Setaflash closed cup tester(ASTM D3278), Tag open cup tester(ASTM D1310) and Cleveland open cup tester(ASTM D92). Also, the AIT of n-acids were measured by using ASTM E659-78 tester. The measured the flash points and the AIT were compared with literatures and MSDS in KOSHA. The measured the flash points and the AIT were different from those in literatures and MSDS. Therefore, This paper shows that it is needed to investigate the MSDS compatibility of n-acids for the fire safety objectives.

• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.993-999
• /
• 2002

Waste paper cup was sulfonated to be used as ion exchanger. Removal characteristic of copper and lead ion by prepared ion exchanger was investigated. The sulfonation was conformed by the high intensity band of $SO_3H$ group around 1100~$1160cm^{-1}$. The synthesized ion exchanger had greater removal ability for copper and lead ion than the original waste paper cup. Ion exchange system reached the final equilibrium plateau within 30min. The maximum removal capacities $q_{max}$ were calculated as 9.79mg/g fur copper and 15.95mg/g for lead, respectively. The affinity of lead based on a weight was higher than that of copper. The ion exchange phenomena appeared to follow a typical Freundlich isotherm.

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.4
• /
• pp.791-807
• /
• 1998

The purpose of this paper is to construct a ring with unity under the derived cup product on the cochain groups of the inverse system and an isomorphism which is useful as the computation of a derived group by deleting the suitable terms in the directed set D. Moreover we apply these results to the K-theory.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2007

Sometimes the problem occurs that a paper knob and a thread attached to a tea bag fall into tea water in pouring tea water into a conventional cup to extract bag type tea. A new cup was developed to solve that problem, which was formed with a thread groove(dia. ; about $1.5{\sim}2\;mm$, hight ; about $4{\sim}5\;mm$) in the upper end of the cup. As a result, the new cup with a thread groove is expected that a paper knob with a thread does not fall into tea water. In addition, the size of a paper knob and the length of a thread may be reduced 70%, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.672-675
• /
• 2001

In this paper, we propose that the calculation method for accurate wind speed using interpolation methods, and the finding method for accurate wind direction using interpolation polynomial, so we make better performance for 3-Cup Anemometer by the proposed methods. We embody the 3-Cup Anemometer with photo sensor to measure wind direction and wind speed. In order to more accurate wind speed and wind direction, we present the methods to overcome the limitations of system memory and of the sensor measurement error by 8 bit gray code (as substitute 360 degrees for 256 degrees data).

• Journal of the Korean Institute of Gas
• /
• v.13 no.4
• /
• pp.40-45
• /
• 2009

In order to investigate the compatibility of data in MSDS(Material Safety Data Sheet), the flash point of xylene isomer was measured by using Pensky-Martens closed cup (ASTM D93), Setaflash closed cup(ASTM D3278), Tag open cup(ASTM D1310), and Cleveland open cup (ASTM D92) testers. Also, the AITs(autoignition temperatures) of xylene isomers were measured by using ASTM E659-78 tester. The measured the flash points and the AITs were compared with literatures and MSDS in KOSHA(Korea Occupational Safety and Health Agency). The measured the flash points and the AITs were different from those in literatures and MSDS. As a result, this paper is shown that it is needed to investigate combustion characteristics of xylene isomer for the fire safety objectives.