• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.87-97
• /
• 1998

One of good ways to make a ship perform well in rough seas is to reduce its waterplane area and accordingly is subject to a reduced wave exciting forties. However, a great reduction of the waterplane area may create a penalty in speed performance due to the increased ratio of the wetted area to the displacement volume. This paper suggests a new catamaran hull form which compromises the speed and seakeeping quality by increasing the waterplane area somehow compared with that of the conventional SWATH ship. A 350 passenger carrying SWATH ship with a cruising speed of 30 knots in sea state of 4 has been developed and its performance was validated by the model tests. The design concept resistance performance and seakeeping dualities of the design craft are presented together with its comparative performance comparison with other high speed crafts.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.1 s.23
• /
• pp.71-78
• /
• 2007

Stainless steel is very famous for using of industrials structure and joint elements. Stainless steel wire drawing is one of the most ancient crafts. But there's not any standard size of tapered die during tile drawing. This paper was studied die angle and dimension of whole die by using AFDEX drawing simulator. Stress, metal flow and strain rate was analyzed by AFDEX tools during the wire drawing. So optimum data of during dies was taken from them. Simulation data was correspond with experimental data. The results of the optimum dies are shown that (1) Reduction angle is $13.8^{\circ}$ (2) Bark relief angle is $20^{\circ}$ (3) Bearing length is 0.7975mm (4) Bearing dia is 0.2393mm The research of the optimum result when the make dies is connected an enterprise. After researching, I hope that indirection effect creation make development situation of the manufactural technical, practical application of the other die size by the detail data, utility factor and economical efficiency.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.1-8
• /
• 2023

This paper aims to complete the results obtained through various technical experiments in sculptures, not to derive the results through the existing design process. To this end, for the purpose of visually completing the accidental curve, an experiment was conducted to induce accidental curves using hitting on a metal craft, raising, and press techniques in which accidental curves can be obtained. As a result, the accidental curve was visually represented using red copper and brass through various compression methods using the press, which showed the best effect, and was completed with a candlestick. Through this, it was possible to obtain results through a technique-oriented modeling methodology rather than a design method that focuses on the meaning of form. I hope that the metal craft techniques will continue to be experimented with and that various researches using them will continue in the future.

• Advances in nano research
• /
• v.15 no.4
• /
• pp.295-304
• /
• 2023

In this paper, a powerful photocatalyst based on carbon nanocomposite is developed in order to obtain a new material applicable in water treatment and especially for the discoloration of effluents used in the textile industry. For that, TiO₂-graphene nanocomposites have been successfully synthesized by a mixture of Functionalized Graphene Sheet (FGS) and tetrachlorotitanium complexes to form FGS-TiO₂ nanocomposite. In the presence of an anionic surfactant, we used a new chemical process to functionalize graphene sheets in order to make them an excellent medium for blocking and preventing the aggregation of TiO₂ nanoparticles. The components of these nanocomposites are characterized by means of X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), which confirms the successful formation of the FGS-TiO₂ nanocomposite. It was found that the TiO₂ nanoparticles were dispersed uniformly on the graphene plane which possesses better charge separation capability than pure TiO₂. The FGS-TiO₂ nanocomposites exhibited higher photocatalytic activity compared to pure TiO₂ for the removal of three dyes: such as Methylene Blue (MB), Bromophenol Blue (BB) and Alizarin Red-S (AR) in water. The removal process was fast and more efficient with FGS-TiO₂ nanocomposite in daylight (in the absence of UV irradiation) compared to pure TiO₂ nanoparticles without and under UV in all pH range.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.3
• /
• pp.32-53
• /
• 2018

The $Sh{\bar{o}}s{\bar{o}}-in$(正倉院) is the detached storage building for Japanese treasures that belongs to $T{\bar{o}}dai-ji$ in Nara, Japan. The reason why $Sh{\bar{o}}s{\bar{o}}-in$ collections are drawing attention is that Japanese artifacts, sculptures, paintings, and other objects that were introduced through the Silk Road, such as Sasanian Persia and India, and those that were introduced from the Unified Silla and Tang China. In addition, hundreds of well-preserved documents of $Sh{\bar{o}}s{\bar{o}}-in$ collections play an important role as a historical reference material covering not only the social situation of the time but also the history of exchange of cultural diplomacy and the change of Buddhist doctrine. In particular, some of collections of $Sh{\bar{o}}s{\bar{o}}-in$ were made in China and may have been imported or received as gifts, but many of the artifacts made in Baekje and Unified Silla are becoming more and more important. This paper examined the research status of $Sh{\bar{o}}s{\bar{o}}-in$ metal crafts of Korean and foreign scholars, and examined the association with the relics of $Sh{\bar{o}}s{\bar{o}}-in$ through metal crafts excavated from the Korean Peninsula. The research on the future direction of $Sh{\bar{o}}s{\bar{o}}-in$ collections should be summarized as follows. 1. Systematization of state-level support and single window for the research of $Sh{\bar{o}}s{\bar{o}}-in$ collections 2. Accurate listing and database of $Sh{\bar{o}}s{\bar{o}}-in$ collections 3. The positive implementation of joint research with Japan and invitation of researchers related to $Sh{\bar{o}}s{\bar{o}}-in$ collections 4. The exchange exhibition between the Korean National Treasures and the $Sh{\bar{o}}s{\bar{o}}-in$ collections 5. Expansion of the research base through the publication and support of books related to $Sh{\bar{o}}s{\bar{o}}-in$ collections.

• Archives of design research
• /
• v.14 no.4
• /
• pp.117-126
• /
• 2001

A new functional meaning has been given as natural resource to bamboo through reanalysis. Bamboo products contributed to creating added-value of pro-environment. In this study, a potential efficiency and vision of bamboo products and crafts are presented. As bamboo plywood and bamboo decorating paper were developed followed by academic and technological support, an activation of markets has been pursued and bamboo pattern tiles for new furniture was developed. This study examined kinds and characteristics of bamboo and processing of raw material and how to express with the material. Through advanced technology, it identified traditional functions and technological mistakes and analysed domestic and overseas applications to enhance utility of plywood made of bamboo. Bamboo pattern tiles were developed for decorating of furniture doors based on bamboo pattern paper. For patterns, 'tortoise, cranes, and deer'meaning eternity and new millenium among Ten Korean Longevity Animals are simply and lively represented. Series of the sun and mountain use effects of bamboo pieces to present bright images and to maximize quality of bamboo. A pattern of '卍'incorporates mystery of the cosmos and meaning of temples together with traditional patched wrapping cloth, Arirang and Chilgyopannori for beautiful ornamentation. Bamboo decorating tiles are made through accumulation of technologies by a cooperation with industries of bamboo equipment and production of furniture in Damyang Bamboo Products Complex. Processing of raw materials is peformed with equipment of Damyang. Development of samples and production and delivery of bamboo goods are handled in Design Venture of Chosun University Chamber. Developed goods decorating doors of furniture are in sale by an order from furniture industries.

• Archives of design research
• /
• v.14 no.2
• /
• pp.197-207
• /
• 2001

A designed object reveals its meaning and image through form, color and material. Among these three elements, material has more powerful influence with its tactile and visual characteristics. In Korea, traditionally materials itself were mainly used to design artifacts rather than various color or formal decoration. The purpose of this study is to investigate the Korean traditional materials, and to classify them by the characteristics of their texture. For this study, the pictures of Korean traditional artifacts were collected from the national museums and literature. Those are architectural and interior elements, furniture, cloths and textiles, arts and crafts. Total of 533 collected artifacts were classified into seven categories, metal, day, stone, paper, wood, straw, fabric things. : 59 metal things, 115 clay things, 62 stone things, 73 paper things, 80 wood things, 47 straw things, 97 fabric things. Each materials were classified into its forming methods and surface treatment focused on the he characteristics of their surface texture. Throughout this study, the uniqueness of forming method and surface treatment of each materials in Korea has been clarified. And furthermore the classification by this various traditional methods of materials will provide plentiful information and ideas to today's designers of the world.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.506-523
• /
• 2011

Since the 1990s, the handmade shoes industrial agglomeration district has formed in the city center, Hyangchon-dong, Jung-gu in Daegu. This paper aims to examine the formation process, to analyze the viability, and to propose policy implications of manufacturing industrial districts in a city center through studying this industrial district. The district's creation began as the result of the dissolution of local production and marketing system of handmade shoes in the 1980s, the excellent accessibility of the location and an inexpensive rent. The district's core viability lies in the external economies derived from local networks through social divisions of labor of production and marketing systems. Because of the lack of organizers of the social division of labor and 'integrated production system done by single business', the effect of external economies created by the social division of labor is limited. To get over this limitation, the district should to be restructured into a 'cultural street of leather crafts' as a part of 'making modern historical and cultural belt' programs within Daegu downtown regeneration policies. To support the restructuring, public assistant measures such as the establishment of a corporate services center should be strengthened.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.459-468
• /
• 2010

Materials are such an important factor in designing furniture. Wood is the biggest part of furniture materials. While wood is soft, eco-friendly and natural material, it is variable because it is characterized by severe expansion and contraction. Thus, if the changeable characteristic of wood is not considered in furniture design, the good design of furniture cannot be produced. As one of the skills dealing with woods, bending is such a useful way for making various forms of furniture. While it has been used in furniture-making for a long time, wood processing techniques like steaming bending, bending with ammonia and high frequency bending has been advanced. As wood is a viscoelastic material and has some plasticity, beautiful curves can be created when force is applied. Therefore this paper studies the types of bending methods for furniture and each characteristic of them. Furthermore, this study classifies wood process according to suitability for mass production or small-scale production and researches the proper wood process by the forms and the way of furniture production. Also this study aims to help furniture designers and cabinet makers with wood bending.

• Ocean Systems Engineering
• /
• v.6 no.3
• /
• pp.245-264
• /
• 2016

The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.