• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.145-150
• /
• 2017

This study aims to analyze panel data using OECD Health data of 34 years to examine how significant the inequality of income is to the inequality of health. The data was from OECD's pooled Health data of 32 countries from 1980 to 2013. The process of determining analysis model was as follows; First, through the descriptive statistics, we examined averages and standard deviation of variables. Second, Lagrange multiplier test has done. Third, through the F-test, we compared Least squares method and Fixed effect model. Lastly, by Hausman test, we determined proper model and examined effective factor using the model. As a result, rather than Pooled OLS Model, Fixed Effect Model was shown as effective in order to consider the characteristics of individual in the panel. The results are as follows: First, as relative poverty rate(${\beta}=-19.264$, p<.01) grows, people's life expectancy decreases. Second, as the rate of smoking(${\beta}=-.125$, p<.05) and the rate of unemployment (${\beta}=-.081$, p<.01) grows, people's life expectancy decreases. Third, as health expenditure(${\beta}=.414$, p<.01) shares more amount of GDP and as the number of hospital beds(${\beta}=-.190$, p<.05) grows, people's life expectancy increases.

• 한국지진공학회논문집
• /
• 제17권4호
• /
• pp.151-157
• /
• 2013

In this study, an externally reinforced structural system for SMC(Sheet Molding Compound) panel water tank, designed according to the Japanese design code, is experimented to evaluate its seismic performance. The test tank is 3m long, 2m wide and 3m high, considering the capacity and size of the shaking table. The measured hydrodynamic pressures are found to be approximately 70% of the Japanese design code values. It may be partially due to the convex shape effect of the unit panels. The analytical results of externally reinforced system based on the measured dynamic water pressures are found in good agreement with the test results. If the design hydrodynamic pressures are estimated properly, the proposed analytical model for the externally reinforced water tank becomes a useful design tool and the Japanese design code is found to provide a safe design for the external frames of SMC panel water tank.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.77-88
• /
• 2021

The stock markets in the BRICS (Brazil, Russia, India, China and South Africa) countries are the leading emerging markets globally. Therefore, it is pertinent to ascertain the critical drivers of stock market development in these economies. The currrent study empirically investigates to identify the linkages between stock market development, key macro-economic factors and institutional factors in the BRICS economies. The study covers the time period from 2000 to 2017. The dependent variable is the country's stock market development and the independent variables consist of six macroeconomic variables and five institutional variables. The study employs a panel cointegration test, Fully Modified OLS (FMOLS), a Pooled Mean Group (PMG) approach and a heterogeneous panel non-causality test.The findings of the study indicate co-integration among the selected variables across the BRICS stock markets. Long-run estimations reveal that five macroeconomic variables and four variables related to institutional quality are positive and statistically significant. Further, short-run causalities between stock market capitalization and selected variables are detected through the test of non-causality in a heterogeneous panel setting. The findings suggest that policymakers in the BRICS countries should enhance robust macroeconomic conditions to support their financial markets and should strengthen the institutional quality drivers to stimulate the pace of stock market development in their countries.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.471-476
• /
• 2013

The present study has been carried out to elucidate the optimal method for the performance test of a refrigerator vacuum insulation panel (VIP), by using numerical heat transfer analysis. Three locations of heat flux meter have been tested, for deriving the best test method to clarify the normal or the abnormal condition of the vacuum insulation panel in a refrigerator. The first location of the heat flux sensor is at the same place as the heater, the second one is at the nearby side location of the heater and the third one is at the opposite side location of heater in the refrigerator. The heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$ were calculated for the cases with the normal VIP, and with the abnormal VIP, and their differences analyzed. From the present study, the first and the second method had a mere difference characteristics of heat flux and $1/q^{{\prime}{\prime}^2}$ or $q^{{\prime}{\prime}^4}$, between the cases with the normal or the abnormal VIP. The magnitude of the heat flux after 300sec had a great difference between the cases with the normal or abnormal VIP for the third method, and it could be considered the most optimal method to test the performance of a refrigerator vacuum insulation panel.

• 한국화재소방학회논문지
• /
• 제24권2호
• /
• pp.89-96
• /
• 2010

본 연구에서는 건축외장재로 많이 사용되고 있는 알루미늄복합패널의 화재위험성을 평가하기 위하여 외장재 실물 연소실험을 실시하였다. 그 결과 알루미늄복합패널의 빠른 화재확산을 보였으며, 이는 알루미늄 복합패널에 내장된 폴리에틸렌이 연소되면서 화염의 수직확산이 급격히 일어난 것이다. 본 실험에서 알루미늄복합패널의 최고 열방출률은 1,144kW로 나타났으며, 열전대에 의해 측정된 표면온도는 알루미늄의 용융점인 $660^{\circ}C$를 넘는 최고 $903.3^{\circ}C$ 이상 상승하였다. 그러므로 알루미늄복합패널의 화재는 상층으로의 급격한 연소확대나 개구부를 통한 내부로의 화재확산에 의한 큰 피해를 줄 수 있을 것으로 판단된다. 이러한 실물실험에서 얻어낸 결과는 향후 알루미늄복합패널의 모델링 구현과 비교함으로써 알루미늄복합패널의 화재 확산 예측에 적용 될 수 있을 것이다.

• Composites Research
• /
• 제26권2호
• /
• pp.79-84
• /
• 2013

본 연구에서는 적층판 시편의 피로손상 균열진전 시험결과와 적층보강판 구조의 응력강도 해석결과를 기초로 충격손상을 모사한 원공과 노치손상을 내재한 보강재 본딩접합 적층보강판 구조의 피로손상 균열진전 수명예측에 대하여 고찰하였다. 그리고 적층보강판 구조시편에 대한 손상허용 시험결과와 손상진전 수명예측 해석결과를 비교분석한 결과 손상균열 길이 변화에 따라 최종파단에 대한 잔여강도를 예측하고 손상허용성 평가를 할 수 있었다.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.51-58
• /
• 2012

압출성형 ECC 패널을 활용한 철근콘크리트 복합 슬래브 구조에 대한 비선형 휨 해석 모델을 새롭게 제시하였다. ECC 패널은 직접인장시험 결과로부터 균열 이후에 고인성 인장거동을 하는 재료로 모델링하였다. 개발 모델을 기존 철근콘크리트 슬래브 및 ECC 패널 철근콘크리트 복합슬래브 실험체의 휨 실험결과와 비교하였다. 예측결과는 실험결과와 잘 일치하였으며, ECC 패널 적용 철근콘크리트 복합슬래브는 균열제어, 휨내력 및 휨변형능력 개선에 장점이 있는 것으로 판단되었다.

• 한국디지털건축인테리어학회논문집
• /
• 제13권4호
• /
• pp.25-32
• /
• 2013

The green building is one of biggest factors to go the goal of energy saving and environmental conservation, reduction of energy consumption, friendly energy technology, recycling of resource, and environmental pollution reduction technology. The purpose of these green buildings realized by the energy-saving technology such as the exterior materials or curtain wall system. The curtain wall system is a element that come to insulated portions of building envelope that results in heat loss. The purpose of this paper is to carried out mock-up tests for exterior wall used in autoclaved lightweight concrete panels in green building practices. Mock-up test execute a mixed process between standard test procedure and complex test procedure based on AAMA 501(American Society for Testing and Materials) and ASTM 283, ASTM 330(American Society for Testing and Materials). In results, tests meet the requirements that grant values in steps of procedures provided on ASTM and AAMA. ALC panel is suitable for a exterior wall product to be gratified thermal cycling performance and structural capacity, deflection(H/200) and lateral displacement(H/50), for curtain walls.

• 한국디지털건축인테리어학회논문집
• /
• 제12권3호
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1274-1277
• /
• 2004

The objective of this research work is to investigate into characteristics of bending stiffness and failure for the ISB ultra-lightweight panel with internally structured material. The expanded metal with a pyramid shape and woven metal are employed as an internally structured material. In order to investigate the characteristics, the specific stiffness and failure map are estimated using the results of three-points bending test. From the results of the experiment, the influence of design parameters of ISB panel on the specific stiffness and failure mode has been found. In addition, it has been shown that ISB panel with expanded metal is prefer to that with woven metal from the view point of optimal design for ISB panel.