• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.16.1-16.11
• /
• 2022

Background: Antimony is used in catalysts, pesticides, brake systems, pharmaceuticals, and synthetic fire retardants in the plastic, paint, and rubber industries. Accumulation of trivalent antimony compounds in the body can cause cardiotoxic effects and increase the risk of electrocardiogram (ECG) abnormalities and sudden death. Antimony exposure can result in action potential prolongation, causing a cardiac repolarization delay, which appears as QTc prolongation and T-wave abnormalities on the ECG. There are no studies on antimony-associated cardiac toxicity in Korea. Case presentation: Accordingly, the present study reports cases of ECG abnormalities in workers handling antimony trisulfide at a company located in the Gyeongsangbuk-do region. Nineteen workers employed at an automobile brake lining manufacturer were exposed to antimony trisulfide dust through thermoforming, grinding, and drilling processes. In 2020, the workers were reported to work 12-hour shifts, 5 days a week. The time-weighted average (TWA) of antimony trisulfide exposure measured in workers was 0.0028 mg/m³. Two workers were excluded from the analysis due to pre-existing medical conditions (cardiovascular disease). Of the remaining 17 workers, ECG abnormalities were found in 41% (seven out of 17: four with QTc prolongation and T-wave abnormalities; two with only T-wave abnormalities; and one with only QTc prolongation). Conclusions: This case report outlines the first few cases in Korea in which potential cardiac toxicity caused by occupational exposure to antimony was identified. However, data regarding cardiac toxicity caused by antimony exposure are still lacking in Korea; thus, additional studies are needed to identify causal relationships.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.2
• /
• pp.143-152
• /
• 2006

High performance concrete(HPC) has been widely used in high-rise building. The HPC has several benefits including high strength, high fluidity and high durability. However, spalling is susceptible to occur in HPC and HPC also tends to be deteriorated in the side of fire resistance performance at fire. This paper investigated the spalling prevention of high performance RC column. Control concrete showed severe failure and a case of concrete with fire enduring spraying material exhibited more severe spalling failure than even control concrete. In addition, concrete with fire enduring paint reported the most favorable spalling resistance effect for preventing spall, compared with other concrete covered with finishing materials, such as fire enduring spraying material, gypsum board, marble board and fire enduring PC board. Meanwhile, concrete adding 0.1% of PP fiber demonstrated spalling resistance performance after 3hours load bearing test.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.43-48
• /
• 2020

Fe₂O₃ nanoparticles with the mixed structure of cubic and nanorod were synthesized by precipitation, hydrothermal, sol-gel method, etching process and heat treatment. Fe₂O₃/TiO₂ core-shell (CS) of type Fe₂O₃@TiO₂ composite was fabricated on a 20 nm nanolayer of TiO₂ coated on the surface of Fe₂O₃ nanoparticles. Fe₂O₃/TiO₂ yolk-shell (YS) composite was prepared by chemical etching and heat treatment of Fe₂O₃/TiO₂ CS nanoparticles. Physical properties of Fe₂O₃, Fe₂O₃@TiO₂ CS and Fe₂O₃@TiO₂ YS nanoparticles were characterized by FE-SEM, HR-TEM and X-ray diffraction. The solar reflectance, commission internationale de l'Elcairage (CIE) color coordinate and heat shield temperatures of Fe₂O₃, CS and YS type Fe₂O₃@TiO₂ pigments filled with poly acrylate (PA) paints were investigated by UV-Vis-NIR spectrometer and homemade heat shield temperature measuring device. The Fe₂O₃@TiO₂ YS red pigment filled PA composite exhibited excellent near infrared light reflecting performance and also reduced the heat shield temperature of 13 ℃ than that of Fe₂O₃ filled counterparts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.314-323
• /
• 2006

This study was conducted to identify ingredients of thinners and to confirm reliability of material safety data sheets (MSDS) of thinners for public and workers' health. The 41 thinner products were collected from paint shops located in Busan and Gyeongnam province. The 12 thinner products among them were identified using product MSDS. GC-MSD was used to analyze 41 kinds of thinners qualitatively and quantitatively. The 12 products MSDS were compared with thinner's component through qualitative analysis to confirm MSDS. Chemical ingredients, such as Benzene, Toluene, and Xylene etc., of thinners were analysed in quantity. The 41 thinner products contained 17 disclosed specific, trade name, or generically described chemical solvent ingredients. These 17 ingredients came under 6 classes: alcohols, aromatic hydrocarbons, esters, glycol ethers, ketones, and mixtures. These 17 ingredients were important in the view of industrial hygiene and had occupational exposure limit in the ambient, such as toluene, xylene, acetone, nonane, EGEE, heptane, cumene, MIBK, indene, tri-methyl benzene, etc, were found in 41 kinds of thinners. Aromatic hydrocarbons were the most identified ingredient in thinners. Especially, the benzene, which induces leukemia, was found in 4 kinds of thinners. The content rates of benzene in thinners were 0.25~1.18%. The benzene in enamel thinner, which were 0.39~0.72%, was highest from chemical classification. The contents of toluene, which was found from 27 kinds of thinners, were 5.35~64.16%, which were highest in sobu thinner as 58.80%. Xylene was found from 22 kinds of thinners and contents of xylene were 4.61~72.42%. Acrylic thinner's contents of xylene were 12.06~51.05%, which was most high. It was found that contents of benzene were increased and frequency of detection was decreased through comparison with other study. The MSDS possession rate of paint shops was low as 29.27%. So it did not provide information with public or workers. Mean of agreement rate between MSDS and components of thinners through qualitative analysis was 42.01% and it has wide range from 8.3% to 75%. There are many deficiencies in MSDS about component of thinners. In some case of sample, expecially, despite containing benzene, information was not written it on MSDS.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.249-254
• /
• 2016

This study was carried out to evaluate the efficiency of white shading agent for reduction of greenhouse air temperature and to develop cost-effective cooling strategies for strawberry seedling production during hot seasons. Experiment results showed that solar radiation ($W/m^2$) was reduced by 14~17% and 33~37% for 15% and 35% white wash shading treatments, respectively, in black shading net treatment solar radiation was reduced by 39~44% compared to non-shaded treatment. Measured greenhouse air temperatures in 15% and 35% white wash shading treatments were $38.4^{\circ}C$ and $36.5^{\circ}C$, respectively, whereas in black shading net covered greenhouses air temperature was $35.1^{\circ}C$, thereby 35% and 15% shading treatments showed 3.3 and $1.9^{\circ}C$ higher air temperatures than black net shading treatment. Crown diameter of strawberry plants in black net shading treatment was 7.5mm, and in 15% and 35% white wash shading treatments were 8.6mm and 8.3mm, respectively. Strawberry transplants grown in 35% white wash shading treatment produced the highest above ground fresh weight(7.8g), followed by 15% white wash shading(6.7g) and black net shading treatments(5.8g). Also, both 15% and 35% white wash shading treatments produced higher root fresh weight(4.1g and 4.3g) compare to black net shading treatments(2.7g).

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• The Journal of Korean Society for School & Community Health Education
• /
• v.1 no.2
• /
• pp.29-48
• /
• 2000

This study was designed to diagnose the correlations between health promotion behavior and primary school students' demographic characteristics and their self-concept, and also this study was aimed at representing the basic data of proper instruction method and school health program with the respective to primary school students' health promotion behavior through the above things. For this, author selected as 5th, 6th graders, 400 persons at 5 elementary schools located on Kyonggi province. This data utilized ANOVA, multiple regression analysis and correlation analysis by SPSS program. The findings of this study were as follows; First, there showed meaningful differences concerning their health promotion behavior according to students' demographic traits. There were a birth date, living standard, domestic environments etc. as a factors which influenced on their health promotion behavior. With this, from ex-past-facto verification for these variable factors, as their birth date was faster, living standard was higher, domestic environments was better, as their health promotion behavior was more promotive. Second, students' health promotion behavior marked 3.61 among total 5 paint with the respective to its fulfillment degree, their self-concept marked 3.45 among total 5 paint. Their mental health promotion behavior marked 3.71 with the respective to inferior category of health promotion behavior, which was the highest score. In the other hands, their physical health promotion behavior marked 3.71, social health promotion behavior marked 3.45. contrary the disease prevention, first-aid & safety, oral health, health & nutrition(P>.05). Third, there show meaningful difference, in the level of p-value <.001 with the respective to the correlations between primary school students' health promotion behavior and their self-concept, more their self-concept was positive, more their more their whole health promotion behavior(r=.479), the fulfillment degree of physical health promotion behavior(r=.384), mental health promotion behavior(r=.543), social health promotion behavior(r=.372) were high. Fourth, with the respective to the results of difference verification concerning their fulfillment degree of health promotion behavior according to the upper, middle, inferior group of self-concept, there showed statistically meaningful difference, in the level of p-value<.001. In the long run, more their self-concept was positive, more their whole health promotion behavior was high. With this, from the results of $Scheff\acute{e}$ verification, there showed meaning differences among the upper and middle group, upper and inferior group, middle and inferior group. Fifth, self-concept played the role as the most important prognostic factor with the respective to primary school students' health promotion behavior(23.0%), in the other hands, there showed positive weight of 24.0% concerning the fulfillment of whole health promotion behavior by domestic environments(1.0%). From the above results, primary school students' the fulfillment degree of health promotion behavior didn't reach to middle or inferior level. In the other hands, there showed positive effects in the correlations between self-concept and the fulfillment degree of health promotion behavior, and also high self-concept group was much positive considering inferior group in the fulfillment degree of health promotion behavior. Accordingly, more their self-concept was positive, more their fulfillment degree of health promotion behavior was effective. Eventually, in the future, there have to make an efforts to develope positive, substantial programs through their self-concept enhancement etc. in the adequate planning or operation for primary school students' health education and school health program.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.254-259
• /
• 2001

In order to make clear the resistance of plane nettings u,sed widely in constructing net cages, the resistance R taken by $R=kSU^2$, where S was the wall area of nettings, U the flow velocity, and k the resistance coefficient, was measured in a circulating water channel by using nylon Raschel nettings and PE trawler-knotted nettings coated with anti-fouling paint or not and then the properties of coefficient k were investigated. The mesh size L and the angle $\phi$ between two adjacent bars was given by the function of Reynolds number ${\lambda}U/v$ in the region of ${\lambda}U/v<180$, i. e., $$k=350(\frac{\lambda U}{v})^{-0.25}$$.where $\lambda$ was the representative size of nettings expressed as $$\lambda=\frac{{\pi}d^2}{2L\;sin\;2{\phi}}$$On the other hand, the coefficient k was almost fixed between 92 and 102 ($kg{\cdot}s^2/m^4$) in the region of ${\lambda}U/v{\geq}180$ and varied according to the ratio $S_n/S$ of the total area $S_n$ of nettings projected to the plane perpendicular to the water flow to the wall area S of nettings, i.e., it was given by $$k=98.6(\frac{S_n}{S})^{1.19}$$ regardless of the coating of paint.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.187-191
• /
• 2011

Rising soil temperature was effectively controled by shading net of 50% and cooled water to maintain average $18.8^{\circ}C$ (maximum $23^{\circ}C$), then shading net of 50% and ground water to maintain average $23.2^{\circ}C$ (max. $28.5^{\circ}C$), shading paint of 30% and shading net (50%) to maintain average $24^{\circ}C$ (max. $30^{\circ}C$) in that order. Alstroemeria 'Modena' most affected by shading and cooling water was better in shoot length as 95.9 cm and fresh weight as 67 g than those of other treatments. The production of cut flower was increased more 121% with treatment 50% shading net and cooling water, 59% with 50% shading net and ground water, and 65% with 30% shading paint than that of 50% shading net, respectively. Soil temperature was higher $8^{\circ}C$ with the plot of circulating warm water than untreated control plot. Alstroemeria 'Aspen', 'Modena', and 'Chanel' increased more plant growth such as plant height, fresh weight in warm water than in untreated control plot, but Alstroemeria 'Bordeaux' decreased plant height. Because of increasing plant growth, flower quality such as peduncle length, peduncle diameter, floret number and flower weight of 4 all cultivar was better in the plot of circulating warm water than untreated control plot. Also, the production of cut flower was increased the most in Alstroemeria 'Modena' by 38%, 'Aspen', 'Bordeaux', and 'Chanel' in that order.