• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.842-846
• /
• 2005

A brake disk and a pad are important parts that affect the braking stability of a railway vehicle. Especially, because a brake disk stops the vehicle using conversion of the kinetic energy to frictional energy, thermal fatigue cracks are generated by the cyclic thermal load, as frictional heat, on a frictional surface and these cracks cause the fracture of a brake disk. Therefore, many researches for the thermal stress must be performed to improve the efficiency of brake disk and ensure the braking stability. In this study, we performed the thermal stress analysis for a ventilated brake disk with 3-D analysis model. For that, we simplified the shape of a ventilated hole to minimize problems that could be occurred in analysis process. Thermal stress analysis was performed in case that pressure distributions on a frictional surface is constant and is not. To determine pressure distributions of irregular case, pressure distribution analysis for a frictional surface was carried out. Finally using the results that were obtained through pressure distribution analysis, we carried out thermal stress analysis of each case and investigated the results of thermal stress analysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.195-204
• /
• 2017

Predicting the failure life of automated manufacturing systems can reduce overall downtime, maintenance costs, and total plant operation costs. Therefore, there is a growing interest in fatigue failure mechanisms as the safety or service life assessment of manufacturing systems becomes an important issue. In particular, fretting fatigue is caused by repeated tangential stresses that are generated by friction during small amplitude oscillatory movements or sliding between two surfaces pressed together in intimate contact. Previous studies in fretting fatigue have observed size effects related to contact width such that a critical contact width exists where there is drastic change in the fretting fatigue life. However, most of them are the two-dimensional finite element analyses based on the plane strain assumption. The purpose of this study is to investigate the contact size effects on the three-dimensional finite element model of a finite width of a flat specimen and a cylindrical pad exposed to fretting fatigue. The contact size effects were analyzed by means of the stress and strain averages at the element integration points of three-dimensional finite element model. This study shows that the fretting fatigue life of manufacturing systems can be predicted by three-dimensional finite element analysis based on SWT critical plane model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1283-1287
• /
• 2004

The design rules are being more strict with requirement of operation speed and development of IC industry. For this reason, required minimum line-width has been narrowed under sub-micron region. As the length of minimum line-width is narrowed, local and global planarization are being prominent. CMP(Chemical-Mechanical Polishing), one of the planarizarion technology, is a process which polishes with the ascent of chemical reaction and relative velocity between pad and wafer without surface defects. CMP is performed with a complex interaction among many factors, how CMP has an interaction with such factors is not evident. Accordingly, the studies on this are still carrying out. Therefore, an examination of the CMP phenomena and an accurate understanding of compositive factors are urgently needed. In this paper, we will consider of the relations between the effects of temperature which influences many factors having an effect on polishing results and the characteristics of CMP in order to understand and estimate the influence of temperature. Then, through the interaction of shown temperature and polishing result, we could expect to boost fundamental understanding on complex CMP phenomena.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.525-534
• /
• 2019

Water rocket is a pressurized liquid propellant rocket that shares the same basic principles of space launch vehicles. Water rockets can be used as an engineering educational material for the liquid rocket principles and the launch vehicle systems, far beyond the scope of K-12 level science education. In this paper, the principles and theories of water rocket propulsion and flight dynamics was investigated at the level of undergraduate rocket engineering classes. Also, the system level design and operation of water rocket is summarized by including the components of launch vehicle, launch pad, payload and recovery as well as altitude measurement methods.

• The Journal of Korean Physical Therapy
• /
• v.30 no.6
• /
• pp.224-228
• /
• 2018

Purpose: The most common cause of plantar ulceration is an excessive plantar pressure in patients with peripheral neuropathy. Foot orthosis and therapeutic footwear have been used to decrease the plantar pressure and prevent the plantar ulceration in in diabetes patients. We investigated whether protective sock with functional insoles reduce plantar pressure while walking in 17 diabetes patients. Methods: An in-shoe measurement device was used to measure the peak plantar pressure while walking. Peak plantar pressure data were collected while walking under two conditions: 1) wearing diabetic sock and 2) wearing the protective sock with functional insoles. Each subject walked 3 times in 10-m corridor under three conditions, and data were collected in 3 steps in the middle of corridor with in right and left feet, respectively. Pared t-test was used to compare the peak plantar pressures in three plantar areas under these two conditions. Results: The protective sock with functional insoles significantly reduced the peak plantar pressure on the lateral rearfoot, but significantly increased the peak plantar pressure on the middle forefoot, and medial midfoot (p<0.05). However, there were not significant in medial and lateral forefoot, lateral midfoot, and medial rearfoot between diabetic sock and the protective sock conditions (p>0.05). Conclusion: The protective sock with functional insoles reduced plantar pressures in the rearfoot and supported the medial longitudinal arch. However, it is necessary to change the position of metatarsal pad in the insole design of forefoot area to prevent diabetic foot ulceration.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.443-461
• /
• 2022

This study was conducted to assess the effects of the dietary supplementation of riboflavin (as a bile salt hydrolase [BSH] inhibitor) and Bacillus subtilis on growth performance and woody breast of male broilers challenged with Eimeria spp. Intestinal bacteria, including supplemented probiotics, can produce BSH enzymes that deconjugate conjugated bile salts and reduce fat digestion. A 3 × 2 × 2 (riboflavin × Bacillus subtilis × Eimeria spp. challenge) factorial arrangement of treatments in randomized complete block design was used. On d 14, birds were gavaged with 20× doses of commercial cocci vaccine (Coccivac^R -B52, Merck Animal Health, Omaha, NE). Dietary treatment of riboflavin and B. subtilis did not affect body weight (BW), body weight gain (BWG), and feed conversion (FCR) d 0 to 14 and overall d 0 to 41. Eimeria spp challenge reduced BWG, feed intake (FI), and increased FCR between d 14 to 28, but increased BWG and lowered FCR between d 28 to 35. There were no effects of the Eimeria spp. challenge on the overall d 0 to 41 FCR and FI, but BWG was reduced. Eimeria spp. challenge increased the abdominal fat pad weight and slight woody breast incidences on processed birds on d 42. Dietary inclusion of B. subtilis and riboflavin at tested levels did not help birds to mitigate the negative impact of Eimeria spp. challenge to enhance the growth performance.

• Earthquakes and Structures
• /
• v.24 no.6
• /
• pp.415-428
• /
• 2023

Low-cost techniques with seismic isolation performance and excellent resilience need to be explored in the case of rural low-rise buildings because of the limited buying power of rural residents. As an inexpensive and eco-friendly isolation bearing, scrap tire pads (STPs) have the issue of poor resilience. Thus, a seismic isolation system under a column (SISC) integrated with STP needs to be designed for the seismic protection of low-rise rural buildings. The SISC, which is based on a simple exterior design, maintains excellent seismic performance, while the mechanical behavior of the internal STP provides elastic resilience. The horizontal behaviors of the SISC are studied through load tests, and its mechanical properties and the intrinsic mechanism of the reset ability are discussed. Results indicate that the average residual displacement ratio was 24.59%, and the reset capability was enhanced. Comparative experimental and finite element analysis results also show that the load-displacement relationship of the SISC was essentially consistent. The dynamic characteristics of isolated and fixed-base buildings were compared by numerical assessment of the response control effects, and the SISC was found to have great seismic isolation performance. SISC can be used as a low-cost base isolation device for rural buildings in developing countries.

• The Journal of Information Systems
• /
• v.32 no.2
• /
• pp.63-85
• /
• 2023

Purpose According to a recent survey, more than 90% of customers make purchase or use decisions for their products and services, primarily based on word-of-mouth(WOM) information (reviews, recommendations, ratings, etc.). However, few studies have explored what factors influence user's WOM intention in the context of OTT service. To address this gap, this study investigates the antecedent factors of WOM intention by adopting stimulus-organism-response (SOR) theory and pleasure arousal dominance (PAD) theory as a theoretical basis. Design/methodology/approach The research model consists of stimulus factors (diversity of original content, aesthetics, interactivity, personalization quality), emotional factors (pleasure, excitement, dominance), and behavioral factor (WOM intention). The research hypothesis was tested using the survey data collected from OTT service users of 305. Findings The result reveals that diversity of original content significantly affects on pleasure and arousal whereas it is not associated with dominance. Findings indicate that aesthetics positively influences pleasure, and interactivity is not associated with arousal. It is also proven that personalization quality has a positive effect on dominance. In addition, pleasure, arousal, and domination are proven to be positively and significantly related to WOM intention.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.543-562
• /
• 2024

This study used persimmon juice, shuliang, and mud to develop the color of hanji fabrics. Persimmon juice and shuliang were used to perform single and mixing dyeing with heat treatment using the pad-dry-cure (PDC) method. Next, mud dyeing was performed, and the hanji fabrics dyed with persimmon juice and shuliang were developed into Yellow Red (YR) Munsell colors with very low values and chroma. Through scanning electron microscopy, the persimmon juice and shuliang were observed to be evenly treated on the hanji fabrics using the PDC method. Furthermore, the presence of iron ions in the dyed fabrics was confirmed using inductively coupled plasma-mass spectrometry analysis. The stiffness of the fabrics dyed with persimmon juice was the greatest, while it gradually decreased for the fabrics treated with mixing and mud dyeing. With mixing dyeing, the colorfastness to washing improved to grade 4, whereas with mud dyeing, the colorfastness to alkaline sweat greatly improved to grade 4~4-5. Based on these findings, this study confirmed that it is possible to develop hanji fabrics with differentiated textures and colors while ensuring practical colorfastness through mixing and mud dyeing.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.4
• /
• pp.39-52
• /
• 2021

Objective : This study aimed to identify the characteristics and analyze the quality of studies on memory improvement using a single-subject research design. Methods : Six studies were selected through the Research Information Sharing Service (RISS), Korean Studies Information Service System (KISS), and National Digital Science Library (NDSL). Keywords were memory training, stroke, early dementia, mild cognitive impairment, and single-subject research design. The characteristics and quality levels were analyzed between January 2011 and October 2020. Results : Regarding the quality level, the middle level (7-10 points) was 66.7% of the four articles, and the high level (11-14 points) was 33.3% of the two articles. Reversal designs were used in all studies. Independent variables were errorless learning, smartphone application, cognitive training system (CoTras), spaced retrieval training (SRT) with errorless learning, spaced retrieval training, and iPad applications. The dependent variables included memory, attention, electroencephalogram, instrumental activities of daily living, depression etc., which increased after the intervention. The total session, study period, and intervention time were varied. Conclusion : In single-subject research design related to memory training, occupational therapy intervention was confirmed as an effective method for improving memory and attention. The quality level of single-subject research design was moderate or higher, and high-quality level of studies should be conducted by additional design to increase the validity in the future.