• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.54-61
• /
• 2008

Warpage, which is one of the molding trouble, acts as possible factor which results in defect in assembly. In this study, a mold was designed to produce specimens with rib parallel to flow direction, specimens with rib perpendicular to flow direction and specimens without rib. This work researched change of warpage according to injection molding condition such as injection pressure, packing pressure, packing time, resin temperature, mold temperature in non-crystalline resins(PC, ABS), crystalline resins(PP, PA66), and 30% glass fiber reinforced-resins(PC, ABS, PP, PA66).Specimens with rib and Crystalline resins show more warpage than specimens without rib and non-crystalline resins, respectively. Glass fiber reinforced-resins and specimens with rib parallel to flow direction show smaller warpage than conventional resins and specimens with rib perpendicular to flow, respectively. Specimens with rib and specimens without rib show reduced warpage as packing time increases. In addition, warpage increase as resin temperature increases. It is found that CAE shows similar tendency with experiment as packing time, resin temperature. when the rib is caused, warpage will reduce and prevent the transformation. product of a irregular form occurs warpage. In the study It'll be basic data that product occurs warpage, preferablity.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.93-99
• /
• 2013

The disease and insect were surveyed locally in greenhouse, fruit packing house and store house of 51 farms in 13 towns having purpose of paprika exportation. By analysis, various disease and insect were not only founded locally but more ones detected in farms having old facilities and no natural enemy. We found 15 pathogens such as Fusarium spp., Alternaria solani, Leveilluila taurica, PepMV (Pepino mosaic virus) and TMV (Tobacco mosaic virus) in greenhouse, Fusarium spp. in fruit packing house and Penicillium spp. in store house. We found 15 insects in greenhouse such as Bemisia tabaci, rialeurodes vaporariorum and Myzus persicae in greenhouse, Hylobitelus haroldi in fruit packing house. However, the problem quarantine disease and insect for importation and exportation were not detected in inspection time.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.130-137
• /
• 1988

This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.278-287
• /
• 2012

In this paper, we propose an allocation scheme for variable message packings to increase efficiency of military operation using Link-16 which is well-known for tactical data link by delivering imagery information rapidly. We propose a variable message packing scheme using COC waveform to support variable data rate under some coverage limitation. Variety of message packing makes Link-16 vary transmission rate appropriately for tactical environment. We also propose a allocation scheme to assign message packing to time slot properly. Finally we verify the performance and superiority of proposed ideas by simulations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.7
• /
• pp.571-577
• /
• 2006

The characteristics of ice packing factor (IPF) at the ice slurry system using one line type are compared with the system using two lines type. The installation space for one transporting line is saved at the one line system. For the one line type, the ice packing factor is reduced along the downstream, but for the two lines type, the ice packing factor is fixed. For the one line system, mass flow rate in the main line is fixed along the down-stream, but for two lines system, the mass flow rate in the main line is reduced along the downstream. For one line system, along the down stream after IPF=0, the temperature at the main steam is increased, and the extracted mass flow is increased. The initial IPF, at which the IPF is not arrived at zero upto the final node, is proposed for the B area.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.305-312
• /
• 2012

This work is to study the variations of adsorption characteristics of binary vapor according to packing system of double-layer bed by fixed bed experiment. Breakthrough curves of single and binary vapor composed of acetone and benzene on single-layer and double-layer adsorption bed composed of activated carbon (AC) and silica-aluminar (SA) were compared. Adsorptions of binary vapor on double-layer bed were influenced by the differences of surface area between adsorbents as well as the polarity difference between adsorbent and adsorbate. The roll-up phenomenon of acetone vapor was happened by replacement with competing adsorption between acetone vapor and benzene vapor on AC bed, but it was not happened on SA bed because acetone vapor and benzene vapor had less difference in affinity with SA bed. The breakthrough times of acetone vapor and benzene vapor on AC/SA double-layer bed were three times and 1.4 times larger respectively than on SA/AC double-layer bed, the differences of breakthrough times were relatively larger than the equilibrium adsorption capacities according to packing system of double-layer bed.

• Journal of the Society of Disaster Information
• /
• v.7 no.1
• /
• pp.12-20
• /
• 2011

This study was performed for identifying the characteristics of mass gathering and human injury in mass gathering based on the literature survey and analysis of mass gathering and crowd packing. The size and density of crowd influenced the characteristics of mass gathering according to type of mass gathering. The variables and causes of human injuries of mass gathering have positive or negative influences based on the weather, attendance, duration, location, mobility, event type, crowd mood, alcohol, drug, crowd density and age. Based on the physical mechanism of crowd packing, the degree of crowd packing was influenced by crowd pressure, crowd density and lasting time. But the magnitude of pressure for pedestrian injury criteria remains for further research.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.59-65
• /
• 2019

In many industries, particle packing is adopted quite frequently. In the particle packing process, the Discrete Element Method (DEM) can analyze the multi-collision of particles efficiently. Two types of contact models are frequently used for the DEM. One is the linear spring model, which has the fastest calculation time, and the other is the Hertz-Mindlin model, which is the most frequently used contact model employing the DEM. Meanwhile, very tiny particles in the micrometer order are used in modern industries. In the micro length order, surface force is important to decreased particle size. To consider the effect of surface force in this study, we performed a simulation with the Hertz-Mindlin model and added the Johnson-Kendall-Roberts (JKR) theory depicting surface force with surface energy. In addition, three contact models were compared with several parameters. As a result, it was found that the JKR model has larger residual stress than the general contact models because of the pull-off force. We also validated that surface force can influence particle behavior if the particles are small.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.51-56
• /
• 2022

Recently, the demand for semiconductors is expanded to various industries, and the use of high-quality and high-performance chips is increasing. With the trend, the diameter magnification and high integration of the semiconductor wafers are mandatory. As a result, there is a growing demand for the productivity improvement and the surface precision. There have been many studies on the stabilization of the wafer manufacturing processes in order to satisfy those specifications. Many complaints have been appealed by the wafer buyers that there are many unacceptable wafers with surface defects and foreign material adhesion which are caused by the vibrations during transportation. This study intends to derive the material improvement of the packing box of the wafers to suppress the vibrations of the box, and eventually to reduce the surface defects and the foreign material adhesion. The result shows that optimal material can substantially decrease the vibration of the packing box.

• Journal of Trauma and Injury
• /
• v.37 no.2
• /
• pp.147-150
• /
• 2024

This case report describes the management of a 51-year-old female patient who arrived at the emergency room with a stab wound to the upper right chest. Immediate medical interventions were undertaken, including blood transfusions and endotracheal intubation. To prevent tension and control bleeding, gauze packing was applied directly through the large open wound. Further surgical exploration identified a laceration in the lung, necessitating a right upper lobe resection. Postoperatively, the patient's vital signs stabilized, and she was subsequently discharged without complications. This case highlights the decision-making process in selecting between an emergency department thoracotomy and an operating room thoracotomy for patients with penetrating chest trauma. It also illustrates the role of gauze packing in managing tension and hemorrhage. In summary, gauze packing can be an effective interim measure for stabilizing patients with traumatic injuries, unstable vital signs, and large open chest wounds, particularly when a chest tube is already in place, to prevent tension and facilitate bleeding control prior to surgical intervention.