• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2019

Environmental evaluation of two different oxygen high barrier films were performed using life cycle assessment. One of the films (traditional film) was composed of aluminum oxide coated PET film, ink, LDPE and LLDPE. Another film (new film) was consists of PET, ink, protein based coating material, LDPE, LLDPE. Main layer to achieve the high oxygen barrier for traditional film was aluminum oxide coated PET film, whereas the protein based coating material act as oxygen barrier layer for new film. Functional unit of this study was 1000 pouches made of traditional and new film. System boundary was factory to gate. The results of this study revealed that the new film shows better environmental performance for most of impact indicator than traditional film, except marine eutrophication and fine particulate matter formation due to extra coating process in new film system.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.149-153
• /
• 1999

As VLSI technology advances rapidly, the operating frequency of digital systems becomes very fast. In such a high-speed system, there are many factors that threaten signal integrity. The noise sources in digital system include the noises in power supply, ground bounce and packaging media and distortions on single and multiple transmission lines. This paper will present a technology survey useful in the design of Gigabit interconnection systems. Some case studies have been constructed which show the lossy transmission line effect of skin effect. dielectric loss, with backplane connectors using the theoretical and practical conditions.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.417-423
• /
• 2007

This paper describes how using the XPS Document technologies of Windows Vista support and enhances interactions with the structural design and construction process. It illustrates the document workflows and the document life cycle in a typical construction base knowledge system. It provides engineers and decision makers and implementers with information about this new technology and how they can apply it to their design and construction models. The paper also highlights opportunities for the new format of data exchange in the recent efforts to develop National Management System Standards for Transportation Applications to benefit from these emerging technologies.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2008

This paper is studied on a prevention system for electrical fire and electrical faults by using electrical temperature characteristic of PTC thermistor. The PTC thermistor has characteristic of positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with $BaTiO_3$ ceramics of positive temperature coefficient. Also PTC shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point. This paper is proposed on a protective control system used with temperature sensor of PTC thermistor. The proposed prevention system will prevent electrical fires due to electric short circuit faults or overload faults. And the prevention system will solve the problems that circuit breakers to be commonly used at existing are happened frequently electrical fires and electrical disasters due to incapable operation, weak reliability and low speed response. Some experimental results of the proposed apparatus are confirmed to the validity of the analytical results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.160-170
• /
• 2018

This paper is an exploratory study on the success factors of Defence Quality Management System (DQMS) which is the certification system granted by the military for improving the quality of munitions. DQMS is established by adding military requirements to the ISO standard, thus, we especially focus on the additional requirements to figure out success key factors of DQMS certification. The 51 additional requirements of Korean Defense Specification (KDS) are empirically investigated from 67 companies that acquired DQMS certification. Firstly, we conduct an independent t-tests on 51 additional requirements of KDS 0050-900-3 to determine if there is a difference between an easily certified company and a hard-to-certify company, and obtain 8 requirements such as 'Internal propagation of performance', 'Preparation of documented work instructions', 'Work instructions in the workplace', 'Documentation of equipment management', 'Inventory management', 'Packaging and identification', 'Guarantee of access to internal audit result for customers', 'Notification to the customer for improper product.' Secondly, we carry out an factor analysis to the 51 additional requirements for classification, and figure out that 4 requirements among the 8 requirements above mentioned are grouped together in the same factor. The 4 requirements are 'Preparation of documented work instructions', 'Work instructions in the workplace', 'Packaging and identification', and 'Guarantee of access to internal audit result for customers.' The result of this paper will provide useful information to the company preparing for DQMS.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.109-114
• /
• 2021

We investigated the effects of atmospheric hydrogen plasma treatment on Cu-Cu direct bonding. Hydrogen plasma was effective in reducing the surface oxide layer of Cu thin film, which was confirmed by GIXRD analysis. It was observed that larger plasma input power and longer treatment time were effective in terms of reduction and surface roughness. The interfacial adhesion energy was measured by DCB test and it was observed to decrease as the bonding temperature decreased, resulting in bonding failure at bonding temperature of 200℃. In case of wet treatment, strong Cu-Cu bonding was observed above bonding temperature of 250℃.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.2
• /
• pp.97-102
• /
• 1993

Hospital pharmacy services are divided into dispensing affairs for inpatients and outpatients, pharmaceutical service, stock control, intravenous admixture service, drug information service, pharmacokinetic consultation service, education and research work, etc. But among those affairs, dispensing affair for outpatient is perceived as the most important work in Korea, because it is linked directly with hospital service for patients. Therefore, total computer system for dispensing area was adopted from opening point of hospital in 1989 in Asan Medical Center. Utilization of computer system for outpatient dispensing area is as follows; 1) Order communication system of prescription by Total Hospital Information System, 2) Automatic print-out system of direction for use by sticker connected with on-line net work, 3) Use of automatic tablet counting and packaging machines connected with on-line net work. Those computer system resulted in curtailment of pharmacy manpower and shortening of waiting-time for outpatient.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.750-755
• /
• 2013

In-wheel motor system gets the driving force from direct-driven motor in the wheel of electric vehicle. It is known as good system for vehicles, from an efficiency, packaging, handling and safety. This paper describes motor and inverter technologies, system configuration and control algorithms for in-wheel type electric vehicle. It is necessary to control on an interrelation perspective because this system drives two motors at same time. In system design, IPMSM(Interior Permanent Magnet Synchronous Motor) including a wide operating range and high-speed rpm is used and flux weakening control is performed in constant power range. Under the torque command from the host controller, auto control box, inverter's output torque is calculated with using torque estimation technique and applied to actual vehicle driving system. It is verified that the configuration and the algorithm are suitable for the in-wheel motor system.

• Management & Information Systems Review
• /
• v.24
• /
• pp.155-185
• /
• 2008

This study tries to find out the resonable improvement method of the export logistics system for fresh agriculture products. Export logistics system improvement of fresh agriculture products rationalized the export network covering the export and import of fresh agriculture products from producers to end customers and realized cost reduction and profit maximization. We are also operating our very own comprehensive logistics system that maximizes customer satisfaction. Supporting the entire logistics process starting from the collection, unloading, sorting, packaging, customs clearing, and information up to comprehensive logistics services, the export logistics system of fresh agriculture products realized a comprehensive transport system that uses 12 feet cool container. We have successfully reduced logistics costs through efficient operation in the export logistics system of fresh agriculture products.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.117-123
• /
• 2019

The general Impulse Sealer has a problem of sealing quality because continuously sealing process results in an undesirable temperature rise, which may accumulate the heat during the operation. In order to address such a drawback, the controlled sealing temperature method can be effectively utilized compared with the general controlled time method. As such, a temperature sensor with capability of detecting the sealing temperature was installed, and a separate PCB was manufactured to control the sealing temperature by measuring and calculating the detected temperature. The temperature changes during the temperature rise and maximum temperature after continuously operation were investigated using an Impulse Sealer system. Next, the results obtained from experiment were compared with each other. As such, the maximum temperature was 70.3℃, whereas 8.9℃ was recorded as control temperature. It implies that this controlled temperature system prevented the undesirable temperature rise, thereby causing a consistent sealing quality.