• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.195-200
• /
• 2004

Microbial lethal value and nutrient retention of sous vide processed spinach were evaluated with mathematical model prediction and experimental trial for different package sizes and pasteurization temperatures. The package size covers 500 g, 1 kg and 2 kg, while the pasteurization temperature includes 80, 90 and 97$^{\circ}C$. The basic process scheme consists of filling blanched spinach into barrier plastic film pouch, sealing under vacuum, pasteurization in hot water with over pressure and final cooling to 3$^{\circ}C$. Pasteurization condition was designed based on attainment of 6 decimal inactivation of Listeria monocytogenes at geometric center of the pouch package by heating cycle, which was determined by general method. Heat penetration property of the package and thermal destruction kinetics were combined to estimate the retention of ascorbic acid and chlorophyll. Smaller packages with shorter pasteurization time gave better nutrient retention, physical and chemical qualities. Larger package size was estimated and confirmed experimentally to give higher pasteurization value at center, lower ascorbic acid and chlorophyll contents caused by longer heat process time. Lower pasteurization temperature with longer process time was predicted to give lower pasteurization value at center and lower ascorbic acid, while chlorophyll content was affected little by the temperature. Experimental trial showed better retention of ascorbic acid and chlorophyll for smaller package and higher pasteurization temperature with shorter heating time. The beneficial effect of smaller package and higher pasteurization temperature was also observed in texture, color retention and drip production.

• IE interfaces
• /
• v.15 no.2
• /
• pp.209-217
• /
• 2002

Quality of Service(QoS) in the telecommunications can be evaluated by analyzing the opinion data which result from the surveyed opinions of respondents and quantify subjective satisfaction on the QoS from the customers' viewpoints. For analyzing the opinion data, MOS(mean opinion score) method and Cumulative Probability Curve method are often used. The methods are based on the scoring method, and therefore, have the intrinsic deficiency due to the assignment of arbitrary scores. In this paper, we propose an analysis method of the opinion data using logit models which can be used to analyze the ordinal categorical data without assigning arbitrary scores to customers' opinion, and develop an analysis procedure considering the usage of procedures provided by SAS(Statistical Analysis System) statistical package. By the proposed method, we can estimate the relationship between customer satisfaction and network performance parameters, and provide guidelines for network planning. In addition, the proposed method is compared with Cumulative Probability Curve method with respect to prediction errors.

• Journal of the Korean Mathematical Society
• /
• v.54 no.4
• /
• pp.1209-1229
• /
• 2017

We coupled the so-called Sumudu transform with the homotopy perturbation method (HPM) and the homotopy analysis method (HAM), which are called homotopy perturbation Sumudu transform method (HPSTM) and homotopy analysis Sumudu transform method (HASTM), respectively. Then we show how HPSTM and HASTM are more convenient than HPM and HAM by conducting a comparative analytical study for a system of time fractional nonlinear differential equations. A Maple package is also used to enhance the clarity of the involved numerical simulations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.535-539
• /
• 2001

In these days. the finite element method(FEM) is a very common method for not only a simple vibration analysis but also the optimization of structures. Since the finite element model may contain thousands of degree of freedom, the eigensolutions require extreme computing power, which will result in a serious time-consuming problem. Thus, many researchers have challenged to find more improved modeling techniques and calculating methods to overcome such problems. The Guyan reduction method and the substructure synthesis method are typical examples of such methods. Of the substructure synthesis method, the component mode synthesis method (CMS) is widely used for dynamic analysis of structure. In this study. for the efficient analysis of jet loom structure. Component Mode Synthesis was carried out. The results of the finite element program developed are compared with those of the commercial package program ANSYS for the validation of the program. The results obtained by the program showed a good agreement with those of ANSYS. The program will be further refined and verified by test to yield more accurate results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.207-212
• /
• 1999

A computational method based on the three-dimensional finite element method is developed for the deformation analysis of roll forming process. the method approximates the process as a kinematically steady state deformation of strip. For industrial usefulness of the simulation method several rolls with arbitrary shapes in one stand can be considered. The shapes and the thickness distributions of strip after roll forming were examined by comparing computation results with experiments It is concluded that the tool is useful enough to predict the process. The overall simulation method was integrated into a sorftware package to help the industrial roll-design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.897-899
• /
• 2016

In recent years, BLE technology has received extensive attention and has been applied to all aspects of life. The existing BLE device has two methods, one is the connection method, and the other is a non-connection method. The representative profile of the connection method is the proximity file. The most typical example of Non-connection method BLE device is a beacon. However, they are both independent and have their own shortcomings. Connection method device can provide service for only one user, others can't use. Security performance of Non-connection method BLE device is poor and the device can't be controlled by the user. In this paper, a combination-mode BLE device profile design scheme is presented, which combines with the previous two methods, and solves the defaults. And We define a dual purpose advertising package that can be used in a normal environment as well as in a disaster environment. Finally, a unidirectional Control idea is proposed. Through performance evaluation, we found that the device has strong stability and low power consumption.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.191-196
• /
• 2018

Recently, consumers' taste has been diversified, consumption pattern has changed, and product package design has been gradually developed. The product packaging design should be made to be able to know the contents accurately, and it should have the charm that attracts consumers' attention and makes them want to buy the goods. In addition, product design should motivate consumers to buy according to brand naming, package layout, content expression method, taste color, as well as graphic elements that induce visual effects.The graphic elements that express the image of the contents in a package design of the product at a glance are the most essential elements to enhance the value added of the product and to induce the purchase motivation and rationalization of the consumer. This study is a study on visual image symbol image using visual information metadata in livestock products. It examines cases of various livestock packages and presents graphical elements that can visualize livestock images at a glance as metadata elements. We will pursue the premiumization of livestock products, raise brand value, and offer differentiating design strategies for economic benefits as well as potential for revitalizing the livestock market.

• Archives of design research
• /
• v.17 no.2
• /
• pp.373-382
• /
• 2004

The value of Korean ginseng has been known in the world since the 4th century B. C. Red ginseng is hot-steamed, and then dried for the purpose of long-term storing. Through the steaming and drying process, its moisture rate is reduced to 14% and its color becomes citrine or light yellowish brown. Its hardened structure enables long-term storage without any deformation. Especially, Korean red ginseng contains substances that promote micro-physiological activities which are not found in American or Sanchi ginseng. Ginseng is produced in diverse forms for the customer's convenience. In this study, these are classified as sliced, dried, and honeyed ginseng, granulated tea, extract, powder, capsules, tablets, drinks and candy. Package design is one of the most effective method in the marketing fields. However, in this research, we found that red ginseng packages are not variously and properly developed in materials and designs. The research pointed out the problems and discuss ways and means of the package design.