• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.1-10
• /
• 2014

Offset paper printing is a promising roll-to-roll technique for color printed materials. Although it is no doubt that understanding ink transfer mechanism in offset printing process is necessary to achieve high printing quality, investing the relationship between inks and substrates at the nip is difficult experimentally due to high printing speed. In this paper, rheological behavior and splitting point of the ink at the nip is studied using package software Ployflow and Flow 3D based on Navier-Stokes equation. Polydimethylsiloxane (PDMS) ink and IGT printability tester were used for an model ink and experiment to compare with that of simulation data, respectively. As a result, higher viscosity at state flow and pressure increased ink transfer due to higher possibility of presence of cavitation at the nip and increase in covering area ratio. These results have shown good agreements with experimental data compared by measuring density of print through.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2013

Residual stress caused in the weldments with high restraint force are often observed during welding in the weldments of Inner and outdoor materials or radial tanks. The reason is that quantitative analysis about thermal stresses during laser welding is lacking for this weldments. To verify Finite Elements Method (FEM) theory, the temperature was measured with thermocouple in a real time in this paper. Also analysis of the thermal stress for welding condition is performed by Comsol program package on various welding condition in SCP1-S butt welding. The principal stress in laser welding process is seen through the width direction. Also, it was confirmed that a change in base metal by thermal expansion made the stress in width direction stronger. Base metal close to the weld bead as the process progresses to the tensile stress in the compressive stress was varied. It was shown that the change of stress was quantitative from the bead at a certain distance.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.1-12
• /
• 2012

This study made an analysis on the relation and influence between outdoor wear benefit, clothing selection criteria and purchasing satisfaction. Survey was conducted targeting 20s-30s males and females who have experience of purchasing outdoor wear and 335 sheets of questionnaire were used for final analysis. And statistics package SPSS16.0 was used for analysis of collected materials. A group seeking the trendy brand turned out to give considerable thought to the brand and trend and purchase less than 100,000won at the discount outlet. A group pursuing functional practicality puts an emphasis on the activity and use, and purchases at the internet shopping mall or department store. Regarding material, function, design, style and color as important, a group pursuing individuality and appearance turned out to purchase clothing at various places such as discount outlet, specialty store and internet. A group that is indifferent to clothing appeared not to care about specific elements when selecting outdoor wear. The result of study showed that consumers of outdoor wear show purchasing satisfaction in respect of design, style, color or trend.

• Journal of Welding and Joining
• /
• v.17 no.6
• /
• pp.84-89
• /
• 1999

Most of ferrous b.c.c weld materials may experience martensitic transformation during rapid cooling after welding. It is well known that volume expansion due to the phase transformation could influence on the relaxation of welding residual stress. To apply this effect practically, it is a prerequisite to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. For this purpose, the analysis is carried out in two regions. i.e., heating and cooling, because the variation of material properties following a phase transformation in cooling is different in comparison with the case in heating, even at the same temperature. The variation of material properties following phase transformation is considered by the adjustment of specific heat and thermal expansion coefficient, and the distribution of residual stress in analysis is compared with that of experiment by previous study. consequently, in this study, simplified numerical procedures considering phase transformation, which based on a commercial finite element package was established through comparing with the experimental data of residual stress distribution by other researcher. To consider the phase transformation effect on residual stress relaxation, the transition of mechanical and thermal property such as thermal expansion coefficient and specific heat capacity was found by try and error method in this analysis.

• Korean Journal of Community Nutrition
• /
• v.5 no.3
• /
• pp.522-528
• /
• 2000

The purpose of this study was to provide basic reference materials for improving the quality of the military foodservice so that they can satisfy the customers needs. The questionnaires employed in this study were developed based on the IPA(Importance Performance Analysis). The questionnaires for the military customers(Group A which is the smaller size then Group B which is larger in size ; a criteria for the classification is the number of soldiers served in the foodservice facilities) consist of demographic variables, concerns about the military foodservice, and service practices. A total of 656 military customers answered the questionnaires. A statistical data analysis was conducted using the SPSS/win package program for descriptive analysis, a $\chi$$^2$-test and t-test. The results of this study could be summarized as follows : The IPA in case of Group A showed the following attributes in Quadrant A(\"focus here\") : (1) availability of the meals that the customers prefer, (4) taste of the food, (16) cooking methods that the customers prefer, (17) the overall quality of the breakfast. The IPA in case of Group B showed the following attributes in Quadrant A(\"focus here\") : (11) cleanliness, (12) kindness of the foodservice personnel, (15) the overall quality of the service, (17) the overall quality of the breakfast. The opinion of the Group A on the improvement of military foodservice was significantly different from that of Group B in the areas of meals/service improvement, problems in military foodservice, improvement in service methods, etc.(p < 0.05).ods, etc.(p < 0.05).

• Korean Journal of Community Nutrition
• /
• v.13 no.6
• /
• pp.890-902
• /
• 2008

The purpose of this study was to develop a standardized job description for dietitians working in the public health nutrition area. Work-oriented job analysis methodology was employed for the study purpose. Subjects of 38 dietitians currently working at health centers in 2002 were recruited. Based on the focus group interview with 7 public health nutritionists and 7 professors, information about task elements was collected. Questionnaires measuring work performance and self-perception of importance of the selected task elements were administered. Reliability and validity of this instrument were tested by Chronbach's alpha and factor analysis. SAS PC package program was used for the statistical analysis. The final developed job description for public health nutritionists included 5 duties, 20 tasks and 93 task elements. The results of this study can be summarized as follows; 1) 5 duty areas are A. plan and evaluation of public health nutrition services, B. developing nutrition education materials, C. implementing nutrition services, D. networking community, and E. self development. 2) Each duty area from A to E was composed with 6, 2, 6, 4, 2 tasks, respectively. 3) Each duty area from A to E was composed with 24, 8, 38, 14, 9, and 2 task elements, respectively.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.283-297
• /
• 1999

Purpose: To compare radiographic images of Digora/sup (R)/ system and Ektaspeed Plus film obtained from normal adults. Materials and methods: Storage phosphor plate(SPP) was placed in a film holder behind Ektaspeed Plus film package without lead foil. The effect of film on SPP was studied in a separate in vitro experiment. Forty-seven sets of images were prepared for the evaluaton. The regions of interest(ROI) for evaluation were designated at seven sites including normal anatomical structures. The image quality for each ROI was evaluated on enhanced and unenhanced storage phosphor(SP) images and Ektaspeed Plus film. Results: Two film-SPP configurations showed significantly different gray levels at each step of the aluminum step wedge(p<0.05). The contrasts were comparable. Enhanced SP images were significantly superior to unenhaned images and film in all anatomical sturctures(p<0.01). The differences between unenhanced SP images and film were significant(p<0.05) except root canal and cortical bone on alveolar crest. For anatomical items. there were statistically significant difference among five observers(p<0.05). Conclusions: The image quality of enhanced SP images were superior to Ektaspeed Plus film. and Digora system is potentially applicable to clinical diagnosis.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.43-51
• /
• 2012

PURPOSE. The objective of this study was to evaluate the effect of sociodemographic factors on quality of satisfaction towards denture treatment. MATERIALS AND METHODS. One hundred subjects (filling inclusion criteria) who were wearing a denture for at least two months were enrolled and divided into five groups on the basis of sociodemographic variables (age, gender, literacy level, socio-economic and marital status). Questionnaires consisting of 38 questions (positive and negative attitude towards denture satisfaction) related to patients' perception of clinical outcome in different domains such as mastication, appearance, speech, comfort, health, denture care and social status were scored by the subjects. Questions reflecting positive attitude were scored as 2, 1, or 0 (yes, uncertain and no, respectively) and reversely for the negative questions. Statistical analysis was done by using Statistical Package for Social Sciences (${\alpha}$= .05). RESULTS. Level of denture satisfaction was higher in age subgroup belonging to 45 - 65 years of age in relation to comfort, health and denture care. Female and male showed significant priority for denture treatment because of esthetic and function respectively. Level of satisfaction was statistically significant with literacy level. Upper high income group showed significantly higher level of satisfaction only in case of social status. Married group showed significantly higher satisfaction level only with comfort. CONCLUSION. Patients' sociodemographic variables were influential factors on denture satisfaction.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.1
• /
• pp.7-16
• /
• 2009

The purpose of this study was to evaluate current packaging modules and design the most acceptable packaging module for domestic and international distribution systems. An optimum packaging module can reduce package costs as well as total distribution costs such as transport, materials handling and warehouse costs. Three different sizes of packaging modules, namely U-type($600{\times}500\;mm$), K -ype($550{\times}366\;mm$) and I-type($600{\times}400\;mm$), were evaluated in terms of the area efficiency and MOEs(measures of effectiveness) for the T-11($1100{\times}1100mm$) and T-12($1,200{\times}1,000\;mm$) pallets. The results showed that the U-type module could fit very well for both pallets and the area efficiency of each module was more than 99 percents. Area efficiency of K-and I-type modules was greatly affected by the pallet footprint dimensions. U-type module also performed better result from MOEs evaluation. Twenty sub-multiple sizes derived from the U-type module were suggested for the future development of the Korean and ISO standards on dimension of transport packages.