Browse > Article
http://dx.doi.org/10.5781/KWJS.2013.31.1.51

Evaluation of the Stress Occurring Phenomenon for Cold-Rolled Carbon Steel During a Laser Welding Process  

Lee, Chulku (Dept. of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
Lee, Wooram (School of Nano IT Fusion Program, Graduate School of NID Fusion Technology, Seoul National University of Science and Technology)
Publication Information
Journal of Welding and Joining / v.31, no.1, 2013 , pp. 51-57 More about this Journal
Abstract
Residual stress caused in the weldments with high restraint force are often observed during welding in the weldments of Inner and outdoor materials or radial tanks. The reason is that quantitative analysis about thermal stresses during laser welding is lacking for this weldments. To verify Finite Elements Method (FEM) theory, the temperature was measured with thermocouple in a real time in this paper. Also analysis of the thermal stress for welding condition is performed by Comsol program package on various welding condition in SCP1-S butt welding. The principal stress in laser welding process is seen through the width direction. Also, it was confirmed that a change in base metal by thermal expansion made the stress in width direction stronger. Base metal close to the weld bead as the process progresses to the tensile stress in the compressive stress was varied. It was shown that the change of stress was quantitative from the bead at a certain distance.
Keywords
Thermal stress; Laser welding; Thin plate welding; Finite elements method; SCP1-S;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 G. Toker, V. Bulatov, T. Kovalchuk and I. Schechter : Underwater Interaction of 1064 nm Laser radiation with Metal Target, World Academy of Science, Engineering and Technology, 55 (2009), 25-28
2 Jang, H. S : The Handbook of Advanced Aluminum Technology, 1997, Hanlimwon (in Korean)
3 R. Poprawe, W. Schulz and R. Schmitt : Hydrodynamics of Material Removal by Melt Expulsion: Perspectives of Laser Cutting and Drilling, Physics Procedia, 5 (2010), 1-18
4 K. L. Choo, Y. Ogawa, G. Kanbargi, V. Otra, L. M. Raff and R. Komanduri : Micromachining of silicon by short-pulse laser ablation in air and under water, Materials Science and Engineering, A-372 (2004), 145-162   DOI   ScienceOn
5 Muammer, K., John, C. and Taylan, A : Prediction of Residual Stress in Quenched Aluminum Block and Their Reduction through Cold Working Processed, Journal of Materials Processing Technology, 174 (2006), 342-354   DOI   ScienceOn
6 Hossain, S., Truman, C. E., Smith, D. J., Peng, R. L. and Stuhr, U : A Study of the Generation and Creep Relaxation of Triaxial Residual Stresses in Stainless Steel, International Journal of Solid and Structure, 44 (2007), 3004-3020   DOI   ScienceOn
7 Juijerm, P. and Altenberger, I : Residual Stress Relaxation of Deep-Rolled Al-Mg-Si-Cu Alloy during Cyclic Loading at Elevated Temperature, Scripta Materialia, 55 (2006), 1111-1114   DOI   ScienceOn
8 James M. Gere, Barry. Goodno : Mechanics of Material 7th Edition, Cengage Learning, Toronto, (2011), 116-127
9 Simsir, C. and Gur, C. H : 3D FEM Simulation of Steel Quenching and Investigation of the Effect of Asymmetric Geometry on Residual Stress Distribution, Journal of Materials Processing Technology, 207 (2008), 211-221   DOI   ScienceOn
10 Sang-beom Shin, Dong-ju Lee and Joo-sung Lee : Evaluation of Buckling Distortion for the Thin Panel Welded Structure According to Welding Processes, Journal of KWJS, 26-3 (2008), 237-243 (in Korean)   과학기술학회마을   DOI   ScienceOn
11 Ki-bo Kwon, Jae-woong Kim and Cheol-Hee Kim : Analysis of Welding Distortion for Laser Welded Sheet Metal Structures of Aluminum Alloy, Journal of KWJS, 27-3 (2009), 276-283 (in Korean)   과학기술학회마을   DOI   ScienceOn
12 Joo-sung Lee : Welding Deformation Analysis of Plates Using the Inherent Strain-based Equivalent Load Method, Journal of KWJS, 28-2 (2010), 159-166 (in Korean)   과학기술학회마을   DOI   ScienceOn
13 Sang-beom Shin and Joong-geun Youn : A Study on the Angular Distortion Prediction of Double Sided Multi-pass Butt Weldment, Journal of KWJS, 25-1 (2007), 37-41 (in Korean)   과학기술학회마을   DOI   ScienceOn
14 Ill-soo Kim, Hak-hyoung Kim, Han-kee Jang, Hee-jin Kim, Sung-kyu Kwak, Hoi-soo Ryoo and Ji-yeon Shim : A Study about Analysis of Weld Distortion using Genetic Algorithm, Journal of KWJS, 27-4 (2009), 398-403 (in Korean)   과학기술학회마을   DOI   ScienceOn
15 Yun-sok Ha : A Study on Weldment Boundary Condition for Elasto-Plastic Thermal Distortion Analysis of Large Welded Structures, Journal of KWJS, 29-4 (2011), 410-415 (in Korean)   과학기술학회마을   DOI   ScienceOn
16 Yun-sok Ha, and Jin-hyuk Yang : Development of Distortion Analysis Method for Multi-pass Butt welding Based on Shell Element, Journal of KWJS, 28-1 (2010), 54-59 (in Korean)   과학기술학회마을   DOI   ScienceOn
17 Hwan-su Chu, and Sang-myung Cho : A Study on the Buckling in Fillet Welds of Sheets, Journal of KWJS, 27-3 (2009), 292-298 (in Korean)   과학기술학회마을   DOI   ScienceOn
18 Joo-sung Lee, and Cheul-ho Kim : A Study on the Fillet Weld-Induced Deformation Control by Applying the Tensioning Method, Journal of KWJS, 27-4 (2009), 382-387 (in Korean)   과학기술학회마을   DOI   ScienceOn