• KSTLE International Journal
• /
• v.7 no.1
• /
• pp.22-26
• /
• 2006

A simple finite element analysis is performed to simulate the thermal characteristics of a micro sensor package with thin film heater embedded in the glass wall of a micro-channel. In this paper, Electric characteristics of ITO sputtered heater were presented in this study, which can be used as a map of heater design in the range of available system temperature. The effects of thermo-physical properties of materials, geometrical structure and boundary condition on the thermal performance are also investigated. Finally, the design of micro-flow induced thermal sensor that is capable of measuring fluid flow with a lower flow detection limit of approximately 24pL/s is presented.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2014

We have designed and synthesized the colorimetric chemosensor through the reactions of 1,2-anthraquinone and indol-3-carboxaldehyde. Due to its well conjugated D-${\pi}$-A system and the existence of NH-fragment in indole moiety, we expected that the chemosensor can detect target anions with NH-fragment in indole part of the structure. In this regard, UV-Vis absorption spectra were measured to investigate sensing properties of the probe toward different anions in DMSO. This chemosensor shows to detect fluoride anions with absorption change in intensity. These properties are mainly related to the deprotonation effect. ICT system in this molecule was also observed by the computational approach using Material Studio 4.3 package.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.153-158
• /
• 2013

In this study, pyrene based chemosensor was synthesized by two step reaction. The chemosensor showed that high selectivity toward fluoride in DMSO. The fluorescence intensity was drastically increased by binding between chemosensor and fluoride ion. Absorption and fluorescence spectra were obtained by UV-Vis spectrometer and fluorescence spectrophotometer. The binding ratio between chemosensor and fluoride ion was also investigated by job's plot method and Benesi-Hildebrand plot. The HOMO/LUMO energy levels and electron distribution were calculated and simulated by Material studio 6.0 Package.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2017

Background: The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book. Methods and Results: Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and $55^{\circ}C$. Changes in hunter color values and quality under the two studied storage treatments (at $20^{\circ}C$ indoors and at $4^{\circ}C$ in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied. Conclusions: Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and $45^{\circ}C$ after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.418-429
• /
• 2012

In this study we surveyed the packaging preferences of consumers for Korean rice cakes as current commercial products in Korea. The questionnaire was developed from a preliminary investigation of typical rice cake packaging patterns and sent to 2332 residents in Korea by random sampling mail. The questionnaire contained questions on the preferences of interior design in packaging, opening methods, individually separated types, printing position, packaging methods, and packaging materials such as paper and plastic. There were responses from 304 residents. The collected data was analyzed by an SPSS package program. Most of the packaging used for Korean rice cakes was plastic (58.9%) which was used for packaging materials and stretch wrap (42.9%) as packing methods. The results showed the preference was the perforated line type used by hand for opening a packaging and interior packaging design with 2~3 partitions. Most respondents expressed an interest in using individual packaging and having printing directly on the packaging. Also, the respondents preferred the packaging design that let them see the contents of a package. Based on the results of the questionnaire, this paper suggested that most consumers would prefer to choose a packaging system with a partition design in a plastic container, individually separated products, and a transparent container for Korean rice cakes. The results of packaging preferences could provide important information for suitable packaging development for Korean rice cakes. Further research should be conducted to improve the shelf life of Korean rice cakes with functional packaging systems such as modified atmosphere packaging or anti-microbial packaging.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.225-231
• /
• 2016

Glasshouse heating package technologies to improve energy usage efficiency in winter were developed. Heating package was composed of the ground water source heat pump with heating capacity of 105kW, the aluminum multi-layer thermal curtain with six layers of different materials and the root zone local heater with XL pipes of ${\phi}20mm$. Venlo type glasshouse($461m^2$) with the heating package was compared with the same type and area control glasshouse with the light oil boiler, the usual non-woven fabric thermal curtain with respect to the glasshouse inside temperature, relative humidity, crop growth, and heating energy consumption. The results of test in paprika cultivation glasshouses showed that the air temperature inside glasshouse with aluminum multi-layer thermal curtain was maintained $2.2^{\circ}C$ higher than that of control glasshouse in un-heating night time and the temperature in bed with root zone local heating was $4.7^{\circ}C$ higher than that in bed without local heating. Average heating coefficient of performance(COP) of the ground water source heat pump used in paprika cultivation was 3.7 and the glasshouse inside temperature was maintained at $21^{\circ}C$ of heating set up temperature. The heating energy consumptions per 10a were measured at 14,071L of light oil and 364kWh of electric power for the control glasshouse and 35,082kWh for the glasshouse applied heating package. As results, the heating cost of the glasshouse applied heating package was 87 percent lower than that of control glasshouse. The growths of paprika in glasshouses of control and applied heating package did not show any significant difference.

• Journal of the Korean Society of Tobacco Science
• /
• v.32 no.1
• /
• pp.12-18
• /
• 2010

The parcel wrapper for cigarettes has been used as the package and media materials for protection and design of product brands. The design of parcel wrapper has been contributed to the delivery of brand image and motivated consumer to purchase the brand. Therefore, the properties of parcel wrapper have been paid attention to highlight the design image, and increasing opacity of media materials has been one of the effective ways to obtain clear design on the paper surface. This study was carried out to improve the opacity of parcel wrapper for cigarettes. The effects of pulp composition and inorganic fillers in the furnish on the optical and mechanical properties were investigated. The use of hardwood in the stock preparation gave the increased opacity of paper than that of softwood. The application of higher refractive indices of fillers was effective to improve opacity. Brightness, tensile strength and stiffness were affected by the retained filler amount on the paper. Increase of filler contents decrease the tensile strength and stiffness due to the lesser bonding ability of fibers.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.82-90
• /
• 2004

The purpose of this study is to investigate the remodeling of apartments housing unit according to the area type and size in order to provide useful information for future plans for more consumer-friendly dwelling units. To achieve this goal quantitative data analyses were employed. The sample was a total of 100 apartments analysed in previous researches conducting case studies on apartments remodeling. The data were analyzed by SPSS WIN program package in terms of frequency, percentage, and x2-test. The results of the study are as follows: The change of finishing materials were made in almost all of the sample. 6.4, 8.6 and 10.6 categories were altered in the small, medium, and large apartments respectively out of 21 remodeling categories. In the case of communal areas, change of finishing materials and installation, removal, and change of lighting fixtures were most frequent. The most frequent alteration in private areas was also observed In change of finishing materials and installation, removal and change of lighting fixtures.

• Transactions of Materials Processing
• /
• v.17 no.4
• /
• pp.249-256
• /
• 2008

Combined phase transformation and heat transfer was considered on the simulation of hot press forming process, using material properties modeler, $JMatPro^{(R)}$ and a finite element package, $DEFORM^{TM}$-HT. In order to obtain high temperature mechanical properties and flow curves for different phases, a material properties modeler, $JMatPro^{(R)}$ was used, avoiding expensive and extensive high temperature materials tests. The results successfully show that the strength of hot press forming parts may exhibit different strength in the same parts, depending on the contact of blank with tooling. It was also shown effectively that the strength of the parts can be controlled by designing appropriate cooling paths and coolants. This was shown in terms of different heat convection coefficient in the calculation. Overall, current combination of software was shown to be an effective tool for the tool and process design of hot forming process, although the material modeler needs to be additionally verified by an appropriate set of high temperature materials test.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.4
• /
• pp.57-63
• /
• 2006

For chip-stack package applications, Cu filling characteristics into trench vias of $75{\sim}10\;{\mu}m$ width and 3 mm length were investigated with variations of electroplating current density and current mode. At $1.25mA/cm^{2}$ of DC mode, Cu filling ratio higher than 95% was obtained for trench vias of $75{\sim}35{\mu}m$ width. When electroplated at DC $2.5mA/cm^{2}$, Cu filling ratios became inferior to those processed at DC $1.25mA/cm^{2}$. Pulse current mode exhibited Cu filling characteristics superior to DC current mode.