• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.246.1-246
• /
• 1979

A glucose-limited “pH-stat” continuous culture study of Lactobacillus bulgaricus NLS-4 in an anaerobic condition showed the marked effects of environmental pH on end products, fermentation blances and bioenergetic aspects of the organism. Lactic acid was the major end product of fermentation with minor products, such as acetic acid, formic acid and ethanol throughout the pH range tested. In acidic conditions below pH 6.5, a typi-cal pattern of homofermentation was revealed whereas in alkaline conditions, the metabolic pattern was changed from homofermentation to heterofermentation and led to acquire much energy. This metabolic change was likely due to the pH-dependent lactate dehydrogenase activity. Molar growth yields (Yglc=35.5-44.4) and YATP, $18.5\pm2.5$ in average which was 80％ higher than the value ever postulated seemed to be accounted for less requirement of maintenance energy of the organism in the culture conditions.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.554-561
• /
• 1999

A novel estimation method was investigated for determining the concentrations of residual biomass, poly-3-hydroxybutyrate (PHB), and main nutrients including carbon and nitrogen sources, phosphate, and mineral ions from the supplied amount of ammonia solution used for a pH-control solution and nitrogen source in a PHB fermentation. The estimation equations for a batch culture and a fed-batch culture were derived from the relationship between the growth rate of residual biomass and the feed rate of the pH-control solution, and then were applied to the batch culture and the fed-batch cultures of Alcaligenes latus. This method was successfully applied to estimate the concentrations of residual biomass, PHB, and nutrients.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.343-347
• /
• 1997

Effect of culture conditions on the fermentation of wheat flour solution by mixed lactic acid bacteria of Lactobacillus brevis, L. fermentum and L. plantarum was investigated. The optimum temperature for the fermentation of wheat flour solution was $35^{\circ}C$ because pH decreased the lowest value and TTA (total titrable acidity) increased the highest value at this temperature. In aerobic condition, fermentor was purged with air at 1.0 vvm and was purged with nitrogen gas at 1.0 vvm in anaerobic condition. The decrease of pH and the increase of TTA in aerobic condition were higher than those in anaerobic condition. In aerobic condition, the optimum condition of oxygen supply was found to be oxygen transfer rate coefficient of $60\;hr^{-1}$ which corresponded to agitation speed of 250 rpm in a 5 L fermentor. Repeated fed-batch cultures were performed using pH-stat in order to increase the productivity of fermented wheat flour. With increasing the repeated fraction of culture volume, mean cycle time increased but maximum operation time decreased. However, the volume of produced broth per culture volume per time and total volume of produced broth per culture volume were maximum at the repeated fraction of culture volume of 20%. In a repeated fed-batch fermentation of wheat flour solution using mixed lactic acid bacteria, the culture condition was optimum at temerature of $35^{\circ}C$, aeration rate of 1.0 vvm, oxygen transfer rate coefficient of $60\;hr^{-1}$, and repeated fraction of culture volume of 20%.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.268-273
• /
• 1990

In order to elucidate the acid tolerance mechanism of Clostridium acetobutylicum against organic acid, the maintenance energy with added butyrate at different pH was determined. Maintenance coeffecient in acidogenic chemostat was higher at pH 6.5 than at pH 5.5 showing that this organism is an acidophile. The addition of butyrate at pH 5.5 and different dilution rate caused linear decrease of the cell concentration though $Y_{ATP}$ did not decrease with increasing undissociated organic acid. $Y_{ATP}$ decreased by increasing the concentration of undissociated organic acid at pH 5.0 by the addition of butyrate. From these results it is hypothesized that the ATP conaumption for pH stat of acidophile C. acetobutylicum is increased at the circumstance with over 30mM of undissociated organic acid.cid.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.356-359
• /
• 2000

A two-stage fed-batch fermentation was carried out to increase xylitol productivity by Candida tropicalis. The first stage for cell growth was performed in the pH-stat and continuous fed-batch modes. The higher cell growth and lower ethanol production obtained in the fed-batch mode where the growth medium was fed when pH of culture broth increased over 5.7. And also the effect of oxygen transfer on xylitol production was investigated by changing agitation speed under 0.5 vvm of aeration. The maximum xylitol productivity and yield were obtained at 500 rpm of agitation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1125-1132
• /
• 2013

In the kimchi manufacturing process, the starter is cultured on a large-scale and needs to be supplied at a low price to kimchi factories. However, current high costs associated with the culture of lactic acid bacteria for the starter, have led to rising kimchi prices. To solve this problem, the development of a new medium for culturing lactic acid bacteria was studied. The base materials of a this novel medium consisted of Chinese cabbage extract, a carbon source, a nitrogen source, and inorganic salts. The optimal composition of this medium was determined to be 30% Chinese cabbage extract, 2% maltose, 0.25% yeast extract, and $2{\times}$ salt stock (2% sodium acetate trihydrate, 0.8% disodium hydrogen phosphate, 0.8% sodium citrate, 0.8% ammonium sulfate, 0.04% magnesium sulfate, 0.02% manganese sulfate). The newly developed medium was named MFL (medium for lactic acid bacteria). After culture for 24 hr at $30^{\circ}C$, the CFU/mL of Leuconostoc (Leuc.) citreum GR1 in MRS and MFL was $3.41{\times}10^9$ and $7.49{\times}10^9$, respectively. The number of cells in the MFL medium was 2.2 times higher than their number in the MRS media. In a scale-up process using this optimized medium, the fermentation conditions for Leuc. citreum GR1 were tested in a 2 L working volume using a 5 L jar fermentor at $30^{\circ}C$. At an impeller speed of 50 rpm (without pH control), the viable cell count was $8.60{\times}10^9$ CFU/mL. From studies on pH-stat control fermentation, the optimal pH and regulating agent was determined to be 6.8 and NaOH, respectively. At an impeller speed of 50 rpm with pH control, the viable cell count was $11.42{\times}10^9(1.14{\times}10^{10})$ CFU/mL after cultivation for 20 hr - a value was 3.34 times higher than that obtained using the MRS media in biomass production. This MFL media is expected to have economic advantages for the cultivation of Leuc. citreum GR1 as a starter for kimchi production.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.6-11
• /
• 1995

In order to screen microorganism producing lactic acid with high productivity from nature, we used a medium containing 100 g/l glucose and selected several microorganisms producing more than 80 g/l L-lactic acid. We investigated their physiological characteristics and compared them. The best microorganism was identified as Lactobacillus casei subsp. rhamnosus. The optimum pH for growth and production of lactic acid was 6.0 and this strain showed the highest growth rate at around 30$\circ$C , but the optimum temperature for lactic acid production was 45$\circ$C . The growth was inhibited proportionally from 50 g/l to 300 g/l of glucose and the maximal cell mass increased according to increasing the concentration of corn steep liquor (CSL) protein up to 30 g/l. In batch fermentation for lactic acid production, we produced 128 g/l L-lactic acid with 20 g/l CSL protein and 150 g/l glucose in 35 hours. In pH-stat fed-batch fermentation, we were able to produce 183 g/l L-lactic acid.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.59-69
• /
• 2014

One of the major challenges in metabolic engineering for enhanced synthesis of value-added chemicals is to design and develop new strains that can be translated into well-controlled fermentation processes using bioreactors. The aim of this study was to assess the influence of various fed-batch strategies in the performance of metabolically engineered Pseudomonas putida strains, ${\Delta}gcd$ and ${\Delta}gcd-pgl$, for improving production of medium-chain-length polyhydroxyalkanoates (mcl-PHAs) using glucose as the only carbon source. First we developed a fed-batch process that comprised an initial phase of biomass accumulation based on an exponential feeding carbon-limited strategy. For the mcl-PHA accumulation stage, three induction techniques were tested under nitrogen limitation. The substrate-pulse feeding was more efficient than the constant-feeding approach to promote the accumulation of the desirable product. Nonetheless, the most efficient approach for maximum PHA synthesis was the application of a dissolved-oxygen-stat feeding strategy (DO-stat), where P. putida ${\Delta}gcd$ mutant strain showed a final PHA content and specific PHA productivity of 67% and $0.83g{\cdot}l^{-1}{\cdot}h^{-1}$, respectively. To our knowledge, this mcl-PHA titer is the highest value that has been ever reported using glucose as the sole carbon and energy source. Our results also highlighted the effect of different fed-batch strategies upon the extent of realization of the intended metabolic modification of the mutant strains.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.237-243
• /
• 2014

Human Glucagon like peptide-1 (GLP-1) is an incretin hormone that promotes secretion of insulin. In order to eliminate the formation of the soluble aggregate, Ala19 in GLP-1 was substituted with Thr, resulting in a GLP-1 mutant GLP-1A19T. The gene synthesis of GLP-1A19T and the fusion of 6-lysine tagged ubiquitin gene were accomplished by using the overlap extension polymerase chain reaction. The ubiquitin fused GLP-1A19T (K6UbGLP-1A19T) is expressed as form of inclusion body with little formation of the soluble aggregation in recombinant E. coli. In order to produce K6UbGLP-1A19T in large amounts, fed-batch fermentation was carried out in a pH-stat feeding strategy. Maximum dry cell weight of 87.7 g/L and 20.4% of specific K6UbGLP-1A19T content were obtained. Solid-phase refolding using a cation exchanger was carried out to renature K6UbGLP-1A19T. The refolded K6UbGLP-1A19T aggregated little and was released GLP-1A19T by on-column cleavage with ubiquitin-specific protease-1. The molecular mass of GLP-1A19T showed an accurate agreement with its theoretical molecular mass.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.536-541
• /
• 2003

Unsaturated poly(3-hydroxyalkanoate) (UPHA) was biosynthesized and the properties of drug delivery using the polymer matrix were investigated. The biosynthesis of UPHA was carried out by pH-stat fed batch fermentation of Pseudomonas oleovorans (ATCC 29347) grown solely with 10-undecenoic acid as a carbon source. The physical and chemical properties of the biosynethesized UPHA were characterized using NMR, FT-IR, GPC and DSC. The drug release experiments were carried out using HPLC with a diffusion cell fur the release amount of ketoprofen as model drug. The effects of crosslinking degree, patch thickness, and enhancer on the drug release were studied. The drug release rate was linearly decreased and consistent with increased crosslinking degree of the polymer matrix. The duration of drug release was enhanced by the Increased patch thickness. The drug release rate was increased with increased amount of propylene gylcol as an enhancer.