• Journal of Environmental Health Sciences
• /
• v.20 no.4
• /
• pp.72-79
• /
• 1994

This study was performed to improve many problems of leaching test of industrial waste sludge analysis. We analyze sludges by variation of leachant, pH and leaching time.The results were as follows: 1. As leaching at pH 5.8 by our leaching test without control of pH during leaching, the leaching rates were very low as below 1%. 2. As leaching at pH 5.8 continuously by hydrochloric acid every 2 hour, the leaching rates were higher than before 1. 3. As leaching at pH 5.0 continuously by acetic acid every 2 hour, the leaching rates were higher than 1, 2. 4. The variations of leaching rate by leaching time were smaller increase after 10 hours than before. 5. It will be recommendable that the pH of leachant maintain constantly during leaching as level of acid rain, and the acetic acid is more effective than hydrochloric acid as leachant.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.121-127
• /
• 1998

This study was to understand leaching characteristics with pH controlling agents and Temp. control, and investigate leaching characteristics with pH control from opening a leaching test to an end for reassessing leaching test of heavy metals with environmental conditions in landfill. Because leaching of heavy metals was increased in low pH, pH must control for leaching in existing leaching test. Generally, regulation time(6hr) of leaching was confirmed reasonablely, except for Cu in plating sludge. In pH controlling solution, there was nearly not difference between Acetic acid and HCl and if considering Cu, the former was appropriate. In a part of heavy metal, leaching rate was increased in high Temp., and normal Temp. in existing leaching test would be revaluated.

• Journal of Powder Materials
• /
• v.23 no.5
• /
• pp.372-378
• /
• 2016

This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of $WO_3$ and $CoWO_4$. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above $90^{\circ}C$ and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of $Na_2S{\cdot}9H_2O$. The tungsten is precipitated as high-purity $H_2WO_4{\cdot}H_2O$ by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.234-239
• /
• 2015

Various leaching tests were applied to the soil affected by accidental leakage of HF in an industrial area in Korea. Three different leaching methods including pH-stat, continuous batch leaching, and column tests were adopted to assess leaching characteristics and mobility of fluorine(F) in soil and the potential risks to ecosystem. Both natural and spiked samples were used for the leaching tests. F concentrations in the batch tests increased by leaching rapidly in the early stage of leaching and then maintained rather constant levels. Column leaching test also show similar result to that of the batch test. pH also controlled the leaching behavior of the soil. With increasing pH, more F was released in the pH-stat test. This is mainly due to the competition and exchange with hydroxyl ions, as pH increase to the alkaline range. Most of the F released by the accident seem to have removed in the very early stage of leaching, whereas some natural proportion from soil minerals are thought to have been released very slowly. Therefore, little F released during the accident remained, based on the results of this study on the samples after two years of the accident. We could conclude that soil contaminated by external effects such as chemical accidents should be managed immediately, especially with F.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.206-209
• /
• 2001

This study presents the leaching characterization of heavy metals according to changes of pH by ANC test on slag produced in electric arc furnace, bottom ash produced in coal-fired plants and their recycling products. Availability test was performed to assess the fraction of the total concentration that under worst environmental conditions could become available for leaching. TCLP, KLT(Korea Leaching Test) and KLTS(Korea Leaching Test of Soil contamination) were carried out to compare the leaching capacity and to estimate the adequacy of regulatory leaching test. Results from regulatory leaching tests could be misleading because the variable ANC of wastes can lead to very different final leachate pHs. The final pH of the regulatory test is not the ambient pH in the disposal environment, the actual solubilities of contaminants in the field may be entirely different from those predicted by these regulatory tests. Leaching behaviour of by-products was changed by recycling processes, therefore acid neutralization capacity and availability of new products, not leaching concentration by one batch regulatory test, are necessary to determine the method of recycling.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.920-925
• /
• 2008

In this presentation, a leaching experiment which is followed the pH changes(pH=4, pH=7) and the mixing rates(1%, 3%, 5%, 7%) was carried out to examine the arsenic reduction effects and the leaching characteristics on arsenic contaminated soil after stabilization treatment in which 5 materials were used as stabilization agencies, i.e. ZVI(zero valent iron), blast furnace slag, steel refining slag, quick lime, and oyster shell meal. Except for blast furnace slag, the arsenic removal rate increased as the mixing rate increases of stabilization agencies. Arsenic leaching concentration was indicated that pH=7 condition is higher than pH=4 condition. This result shows because arsenic immobilization reaction increases as pH decreases, and arsenic adsorption takes place as pH decreases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.76-81
• /
• 2006

The leaching behavior of heavy metal ions with pH and colloid/interface property was analyzed by ICP and SEM. The heavy metals in EAF dust are 'amphoteric metal' and the heavy metal ions leached a little at pH 10. And the leaching concentrations of heavy metals at pH 12 were higher than the that at pH 8. The leaching concentrations of heavy metal ion were decreased with adding the clay to the EAF dust. Especially, the leaching concentrations of heavy metal ion were effectively decreased at pH 12. The observation of colloid/interface properties shows that the soluble silicon hydroxide from clay at pH 12 was precipitated at the surface of the heavy metal and clay particles. This silicon hydroxide precipitates were named the PSHP. The leaching concentrations of heavy metal ion were effectively decreased by the formation of PSHP when adding the clay to the EAF dust and controlling the pH of the slurry at 12.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2014

The present study concerns the leachability of alkali ions from hardened cement paste in terms of an increase in the pH together with the rate of alkali leaching. To evaluate the influence of mix design on the leaching capacity and rate of alkali, different water-cement ratios (W/C) and binders were used to manufacture paste specimens. The cement paste was made in the form of rectangular bucket where deionised water was subsequently supplied as solvent media. Then the specimen was wrapped in polythene film to avoid contact to atmospheric conditions, which may affect the water chemistry in the bucket. The pH of media was monitored until no further change in the pH value was observed, of which value then used to calculate the leaching capacity and rate. The influence of binder on the pH of solvent is more dominant than that of water to cement ratio: OPC paste produced the highest level of alkali leaching, whilst 30% PFA and 60% GGBS pastes imposed lower level of alkali leaching. After the monitoring of the pH, the inner bucket was ground with an increment of 1.0 mm to measure the leaching influence using the suspension consisting of paste powder and deionised water. It was found that the impact zone for OPC was about 7-8 mm, whilst 30% PFA and 60% GGBS had deeper impact depth of the alkali leaching.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1357-1364
• /
• 2000

Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.23-28
• /
• 2016

In this study, leaching process to extract phosphorus from the steelmaking slag was investigated for using the fertilizer resources of agriculture. In general, the phosphorus of steelmaking slag is formed as $C_2S-C_3P$ solid solution, and also, this solid solution is soluble in water more than the other phase in slag, and less than free CaO phase. In the present experiment, the influence of pH on the leaching behavior of various elements from the steelmaking slag was investigated by using multi-component steelmaking slag. When the pH was decreased, the concentration of Ca, Si, P and Fe in solution from the steelmaking slag was increased. Furthermore, at a pH of 3, the concentration of P ion in solution was decreased as leaching time increased. It is considered that the decrement of P was caused from the precipitation reaction between P ion and Fe ion in solution.