• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.81-87
• /
• 2003

In this work, $Fe_3O_4$ (magnetite), conductive filler was prepared from $FeCl_2{\cdot}4H_2O,\;(CH_2)_6N_4$ (hexamethylene tetramine), and $NaNO_2$, followed by mixing with crystallizable chloroprene rubber(CR). The influence of conductive filler content on the properties of the conductive composite was studied and temperature dependence of the electrical conductivity (${\sigma}$) was also investigated. It is found that the percolation threshold concept holds true for the conductive particle-filled composite where ${\sigma}$ indicates a nearly sharp increase when the fraction of magnetite in the mixture exceeds 27%. The temperature dependence of ${\sigma}$ is thermally activated blelow or at the $P_c$. Magnetite acts as reinforcement and conductive filler for CR rubber. Moreover, it is shown that the composite with magnetite of 50 phr gives the most significant mechanical properties for tensile strength and elongation at break, which is due to the formation of optimum physical interlock and crosslinking. The results of 100%, 200%, and 300% moduli suggest that the moduli are related with reinforcement effect of magnetite and viscosity of the blend.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.43-48
• /
• 2017

This experiment was conducted to test the suitability of various organic materials in order to reduce the use dependence of peatmoss as a soil pH regulator and to examine the effect of soil organic matter supply. A 2-year old northern-highbush blueberry (Vaccinium corymbosum L.) 'Duke' plants were planted in the field at $2.0m{\times}2.5m$ spacing in spring. Before planting, organic materials were incorporated into the soil including the planting hole at 20 liter per plant, as the following mixtures: peatmoss only (20 L), peatmoss (10 L) + pine needle (10 L, PN), peatmoss (10 L) + rice hull (10 L, RH), and peatmoss (10 L) + sawdust (10 L, SD). The pH of organic materials was lowest in peatmoss (pH 4.3), followed by PN (pH 4.8), SD (pH 5.7) and RH (pH 7.8). Soil pH measured right after planting ranged from 5.3 to 5.9 and was lower in PM only and PM + PN than PM + RH and SD treatments. In the third year, the pH lowered to the range of 4.2 to 4.5, with PM and PM + PN still maintaining lower values. The early growth was good in the mixed treatment of PM and PN, and the plant height and width and the number of new shoots were good in the PM treatment. Soil water content was maintained highest in PM + PN, followed by PM, PM + SD and PM + RH. Vegetative growth was maintained better in PM and PM + PN, and the number of flower cluster and yield were also slightly higher in those treatments while mean fruit weight was similar among all treatments. Fruit quality indices such as total soluble solids, titratable acidity and firmness were not affected.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.171-171
• /
• 2010

GaN 기반 Light emitting diodes(LEDs)의 p-type doping layer는 일반적으로 hole을 발생시키는 acceptor로 Mg이 사용하되고 있다. 보통 Mg이 도핑된 p-type GaN은 >$1\;{\Omega}{\cdot}cm$의 저항이 존재하는데 그 이유는 Mg의 열적 이온화를 위한 activation 에너지가 높아서 상온에서 valence band의 hole concentration는 전체 억셉터 농도의 1%가 되지 않기 ��문이다. 본 논문에서는 높은 hole 농도를 얻기 위해서 metalorganic chemical-vapor deposition (MOCVD)를 장비를 사용하여 사파이어 기판의 misorientation-angle에 따른 p-type a-plane(11-20) GaN 특성을 분석하였다. misorientation-angle은 c축 방향으로 $+0.15^{\circ}$, $-0.15^{\circ}$, $-0.2^{\circ}$, $-0.4^{\circ}$ off된 r-plane(1-102) 사파이어 기판 을 사용하였다. p-type 도핑물질로 bis-magnesium (Cp2Mg) 소스를 사용하였고 성장 과정중 발생하는 hydrogen passivation으로 인한 Mg-H complexes현상을 해결하기위해 conventional furnace annealing (CFA)와 rapid thermal annealing (RTA)를 이용하여 열처리 공정을 진행하였다. 열처리 공정은 Air와 N2 분위기에서 $650^{\circ}C$에서 $900^{\circ}C$ 사이의 다양한 온도에서 수행하였고 Hall 측정을 위해 Ni을 전극 물질로 사용하였다. 상온에서 Accent HL5500IU Hall system을 사용하여 hole concentration, mobility, specific resistance을 측정하였다. 열처리 공정 후 Hall측정 결과 $+0.15^{\circ}$, $-0.15^{\circ}$, $-0.2^{\circ}$, $-0.4^{\circ}$ off된 각 샘플들은 온도, 시간, 분위기에 따라 hole concentration ($7.4{\times}10^{16}cm^{-3}{\sim}6{\times}10^{17}cm^{-3}$), mobility(${\mu}h=\;1.72\;cm^2/V-s\;{\sim}15.2\;cm^2/V-s$), specific resistance(4.971 ohm-cm ~8.924 ohm-cm) 가 변화됨을 확인 할 수 있었다. 또한 광학적 특성을 분석하기 위해 Photoluminescence (PL)을 측정하였다.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.102-109
• /
• 1998

To investigate the increased acid tolerance of a acid-resistant mutant Leuconostoc mesenteroides M-100 improved as a kimchi starter, proton permeability, ATPase acitivity, glycolysis activity, $Mg^{2+}$ releasement, and membrane fatty acid composition were studied and comprised with its wild type Leuconostoc mesenteroides Mw. In the proton permeability experiment, the mininum values of the average half time ($t_{1/2}$) of pH equilibration through the cell membrane of the Mw and the M-100 were about 8.6 min and 9.2 min in 150 mM KCI solution, respectivily. In the 3% NaCl solution, the $t_{1/2}$ values of the Mw and the M-100 were 6min and 8.6 min, respectivily. The values and pHs of maximal specific activities of ATPase originated from the Mw and the M-100 were 0.6U at pH 5.5 and 0.8U at pH 5.5, respectivily. The result of pH dependence of glycolysis showed that the M-100 had higher activities than that of Mw except at pH 5.0. The releases of magnesium from the Mw and the M-100 were observed about 36.5% and 13% at pH 4.0 after 2 hours, respectivily. The results of comparison of membrane fatty acid composition of the Mw with the M-100 showed that $C_{12}$, $C_{14}$, $C_{18:1}$, and $C_{19:0cyclo}$ were major different fatty acids between two strains and the content of $C_{18:1}$, and $C_{19:0cyclo}$ were 23.4%, 10.2% in the Mw and 15.1%, 12.2% in the M-100. These results indicated that acid tolerance of the M-100 was significantly improved in comparison with its wild type Mw.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.155-165
• /
• 1994

Some mucoadhesive polymers such as hydroxypropylcelluose (HPC) and carbopol-934 (CP) have been employed for the preparation of mucoadhesive polymeric systems, and their physical properties including mucoadhesion, swelling, and drug release were evaluated. A new simple experimental technique that can quantitatively measure the bioadhesive properties of various polymeric systems has been developed by the methods of detachment force test. As the polymeric systems, the discs of freeze-dried HPC/CP solid dispersions were prepared. The mucosa used in these tests were upper, middle, and lower parts of small intestine of male rats weighing $300{\sim}350\;g$. Detachment forces were increased as the mole fraction of CP increased in discs of HPC/CP solid dispersions. In the points of intestinal site dependence of mucoadhesion, the solid dispersions revealed non-specific mucoadhesion to the intestine. Swelling and drug release characteristics of mucoadhesive polymeric systems were studied extensively to find out the feasibility for the oral controlled delivery systems. Swelling ratio, expressed as the final height/initial height, has been determined in various pH buffer solutions. Hydrochlorothiazide (HCT) was employed as a model drug for release study. Apparent swelling and drug release rate constants, $K_s$ and $K_r$ respectively, were obtained from the square-root time plot of either swelling ratio or released amount of drug, particularly for the time periods before reaching the equilibrium. As a result, the swelling ratio of HPC/CP solid dispersions was increased as the weight percentage of CP increased. Similarly, the release of HCT from the solid dispersions was dependent on pH changes and CP contents, resulted in the slower release of HCT with the increases of pH and CP contents.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.275-282
• /
• 1998

To investigate the increased acid tolerance of a acid-resistant mutant Leuconostoc paramesenteroides P-100 improved as a kimchi starter, proton permeability, ATPase acitivity, glycolysis activity, $Mg^2$sup +/ releasement, and membrane fatty acid composition were studied and comprised with its wild type Leuconostoc paramesenteroides Pw. In the proton permeability experiment, the maximum values of the average half time (t$\_$1/2/) of pH equilibration through the cell membrane of the Pw and the P-100 were about 6.4 min and 7.8 min in 150 mM KCI solution, respectively. In the 3% NaCl solution, the t$\_$1/2/ values of the Pw and the P-100 were 5.5 min and 6.9 min, respectively. The values and pHs of maximal specific activities of ATPase originated from the Pw and the P-100 were 0.5 unit/mg protein and 0.78 unit/mg protein at pH 6.0, respectively. The result of pH dependence of glycolysis showed that the P-100 had higher activities than that of Pw except at pH 7.0. The releases of magnesium from the Pw and the P-100 were observed about 54.5% and 23.2% at pH 4.0 after 2 hours, respectively. The results of comparison of membrane fatty acid composition of the Pw with the P-100 showed that C$\_$8:0/, C$\_$9:0/, C$\_$10:0/, C$\_$11:0/, C$\_$18:0/, and C$\_$19:0,cyclo/ were major different fatty acids between two strains and the content of C$\_$18:1/, and C$\_$19:0,cyclo/ were 2.8%, N.D (not detected) in the Pw and 0.4%, 2.3% in the P-100. These results indicated that acid tolerance of the P-100 was significantly improved in comparison with its wild type Pw.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.104-109
• /
• 2011

We have investigated the anisotropy of the superconducting properties for $CaC_6$ and $SrC_6$ using upper critical fields ($H_{c2}$) and specific heat ($C_p$). From the upper critical fields of $CaC_6$ at different magnetic field orientations, H//c and H// ab, the anisotropy is found to be ~ 5 at low temperatures, much larger than that of $SrC_6$. These results are in contrast to the stronger anisotropy in the electronic structure for $SrC_6$ than for $CaC_6$ indicating a stronger anisotropy in the superconducting gap in $CaC_6$. The findings are confirmed by the temperature dependence of the superconducting specific heat below $T_c$ for $CaC_6$ and $SrC_6$, suggesting the important role of anisotropic electron-phonon coupling in superconducting intercalated graphites.

• ETRI Journal
• /
• v.16 no.3
• /
• pp.1-10
• /
• 1994

Undoped GaAs has been successfully grown by chemical beam epitaxy (CBE) via surface decomposition process using arsine $(AsH_3)$ and trimethylgallium (TMG). Three distinct regions of temperature-dependent growth rates were identified in the range of temperatures from 570 to $690^{\circ}C$. The growth rates were found strongly dependent on the V/III ratio between 5 and 30. The growth rate at low V/III ratio seems to be determined by arsenic produced on the surface, whereas at high V/III ratio it shows dependence on the adsorption of TMG. Hall measurement and photoluminescence (PL) analysis show that the films are all p-type and that carbon impurities are primarily responsible for the background doping. Carbon concentrations have been found to be reduced by two orders of magnitude as compared to those of epilayers grown by CBE which employs TMG and arsenic obtained from precracked $AsH_3$ in a high temperature cell. It was also found that hydrogen atoms dissociated from unprecracked $AsH_3$ play an important role in removing hydrocarbon-containing species resulting in a significant reduction of car-bon impurities.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.38-45
• /
• 1989

We have studied the electrical characteristics of the hydrogenated amorphous silicon (a-Si:H) ambiploar thin film transistors (TET'S)using 100ppm boron-doped a-Si:H as an active layer. The enhancement of drain current due to the double injection behavior has been observed in the p-channel operation of the TFT. The drain current decreases with time in streched exponential form when the gate voltage is positive. The result indicates that the dangling bonds created by electron accumulation show identical time dependence as the diffusion of hydrogen in the film. We observed the experimental evidence that the doping efficiency changes either when the gate bias is applied or when the light is illuminated on boron-doped a-Si:H.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.235-238
• /
• 2016

Microstructure and magnetization behaviors of $MnBi/Fe_3B/Nd2_Fe_{14}B$ nanocomposite alloy have been investigated. It was found that the coercivity increased firstly and then decreased, and saturation magnetization decreased with the additon of MnBi alloy. The addition of 40 wt.% MnBi powder enhanced the coercivity from 192.8 kA/m to 311.2 kA/m. The ${\delta}M$ and D(H)-H plots suggested the occurrence of a stronger exchange-coupling occurring between the hard and soft magnetic phase for this sample. The dependence of coercivity with temperature was discussed in 40 wt.% $Mn_{55}Bi_{45}$/ 60 wt.% $Nd_{4.5}Fe_{76.5}Nb_{0.5}B_{18.5}$ alloy powder, and a positive temperature coefficient was founded from 298 K to 350 K.