• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1600-1604
• /
• 2018

This paper reports on a systematic and quantitative assessment of light induced degradation (LID) and regeneration in full Al-BSF and passivated emitter rear contact cells (PERC) along with the fundamental understanding of the difference between the two. After LID, PERC cells showed a much greater loss in cell efficiency than full Al-BSF cells (~0.9% vs ~0.6%) because the degradation in bulk lifetime also erodes the benefit of superior BSRV in PERC cells. Three main regeneration conditions involving the combination of heat and light ($75^{\circ}C/1\;Sun/48h$, $130^{\circ}C/2\;Suns/1.5h$ and $200^{\circ}C/3\;Suns/30s$) were implemented to eliminate LID loss due to BO defects. Low temperature/long time ($75^{\circ}C/48h$) and high temperature/short time ($200^{\circ}C/30s$) regeneration process was unable to reach 100% stabilization. The intermediate temperature/time ($130^{\circ}C/1.5h$) generation achieved nearly full recovery and stabilization (over 99%) for both full Al-BSF and PERC cells. We discussed the effect of temperature, time and suns in regeneration mechanism for two cells.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.123-130
• /
• 2008

To avoid some protection systems such as firewall, P2P applications have recently used to apply dynamic port numbers. Reliable estimates of P2P traffic require examination of packet payload, a methodological land mine from legal, privacy technical, logistic, and fiscal perspectives. Indeed, access to user payload is often rendered impossible by one of these factors, inhibiting trustworthy estimation of P2P growth and dynamics. Despite various methods such as port-based and signature-based techniques, it still dose not satisfy the method which uses both qualitative and quantitative aspects. In this paper, a method using SVM mechanism which discriminate the P2P traffic from non-P2P traffics using differences between P2P and other application traffics is suggested. This is a systematic methodology to identify P2P networks, and without relying on packet payload.

• Journal of Powder Materials
• /
• v.9 no.1
• /
• pp.43-49
• /
• 2002

Microstructural and mechanical characteristics of P/M 6061 Al alloy subjected to equal channel angular pressing (ECAP) were investigated. The P/M 6061 Al alloy had an intial grain size of approximately $20\mutextrm{m}$. An equiaxed ultra-fine grained structure with the mean grain size of $~50 \mutextrm{m}$ was obtained by four repetitive ECAP at 473 K. The microhardness of P/M 6061 Al alloy was drastically increased from about 40 Hv to 80 Hv by two repetitive ECAP at 373 K. However, the microhardness decreased with increasing ECAP temperature. The tensile stength of as-hot-pressed P/M 6061 Al alloy before ECAP was 95 MPa, whereas it increased to both 248 MPa after two repetitive ECAP at 373 K and 130 MPa after four repetitive ECAP at 473 K. The tensile properties of the ECAPed sample were compared with those of commercial cast 6061-O and 6061-T4 Al alloys.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.127-130
• /
• 2004

본 연구는 발효시킨 머루주박을 배합사료와 혼합하여 급여한 돈육의 품질특성을 검토하기 위하여 실시하였다. 수분, 조단백질 및 조회분은 급여돈육과 대조돈육이 비슷하였으나, 지방함량은 급여돈육이 높았고, 콜레스테롤 함량은 급여돈육이 2.19 mg/100g으로 대조돈육의 61.13 mg/100g보다 현저하게 낮았다. 휘발성 염기질소와 pH는 두개의 시료가 비슷하였으나, TBARS 값은 급여돈육이 대조돈육보다 낮았다. 육색의 경우 급여돈육의 적색도 및 황색도가 대조돈육보다 높았으며, 지방색의 경우 명도와 황색도는 두 개의 시료가 차이가 없었으나 적색도는 급여돈육이 높았다. 아미노산 조성은 glutamic acid가 가장 많았고, 포화지방산은 stearic acid, 불포화지방산은 oleic acid가 가장 많이 함유되어 있었으며, 급여돈육의 EPA, DHA 함량이 대조돈육보다 높았다. 그리고 대조돈육의 점착성, 응집성, 저작성, 전단력가가 급여돈육보다 높았으며, 보수력은 급여돈육이 높게 나타났다. 관능검사 결과 급여돈육의 맛(p<0.001), 향기(p<0.01), 풍미(p<0.001), 다즙성(p<0.01) 및 전체적인 기호성(p<0.01)이 대조돈육보다 유의하게 높았다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.127-130
• /
• 2009

Recently agricultural productivity innovation projects are increasing all over the farming countries. To reform and improve the productivity of agricultural industry is important factors. This research is to do the functional Analysis for P-C-M support System Design in Agricultural Facilities. By analyzing the for P-C-M support System modules in the agricultural construction process, P-C-M support System factors are derived and defined. The result of this study would widely be used as a fundamental research guide to develop the agricultural P-C-M support System in the agricultural construction process.

• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.85-91
• /
• 2017

This study analyzed the effect of NCS - based education and training of small and medium manufacturing on job performance. The results of this study were as follows: First, the effects of NCS education and training on job performance(p<.001, ${\beta}=5.130$) were analyzed. As a result, (p<.01, ${\beta}=3.783$) and on-the-job training had a significant effect on job attitude (p <.05, ${\beta}=-2.448$). (P <.01, ${\beta}=.740$), job skill and collective education (p <.01, ${\beta}=.459$), and job skill (P <.01, ${\beta}=.575$), job attitude and field training (p <.05, ${\beta}=-.320$), collective education and field training (p < .268) were found to be correlated. Third, the analysis of the effect of the age of general characteristics on job attitude showed that the fifties (3.75) had higher attitude than the 20s (3.44), 30s (3.26) and 40s (3.63). The purpose of this study is to investigate the effect of NCS - based education and training on the job performance of small and medium manufacturing industries.

• Physical Therapy Korea
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2010

The purpose of this study was to compare EMG activity for pectoralis major muscle during shoulder movement with various abduction angle and rotation position in supine position. Fifteen healthy subjects were recruited for this study. All subjects performed shoulder horizontal adduction holding a 2 kg dumbbell in shoulder abduction $40^{\circ}C$, $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $160^{\circ}C$ with shoulder neutral, internal rotation (IR), and external rotation (ER). Surface EMG activity was recorded from pectoralis major clavicle part and pectoralis major sternum part for 5 seconds and EMG activity was normalized to the value of maximal voluntary isometric contraction (%MVIC). Dependent variables were examined with 3 (Neutral, IR, ER) ${\times}$ 5 ($40^{\circ}C$, $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $160^{\circ}C$) analysis of variance with repeated measures. The EMG activity of pectoralis major muscle was significantly different between shoulder abduction angles and between shoulder rotation positions (p<.05). The highest value of EMG activity of pectoralis major clavicle part among shoulder abduction angles was in $70^{\circ}C$ and, $90^{\circ}C$ in that order. The highest value of EMG activity of pectoralis major sternum part among shoulder abduction angles was in $130^{\circ}C$ and, $90^{\circ}C$ in that order. According to the rotation degree, shoulder ER showed the highest value and IR showed the lowest value in both muscle parts. These results suggest that shoulder abduction $70^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$ will be effective during manual muscle testing (MMT) and strengthening exercise for pectoralis major muscle. It is also supposed that shoulder ER is the efficient posture for strengthening of pectoralis major muscle.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.1
• /
• pp.63-70
• /
• 1997

A study was performed to examine the aging behaviors of Al-2.1Li-2.9Cu alloy by differential scanning calorimetry and transmission electron microscopy. DSC measurements were conducted over the temperature range of $25{\sim}550^{\circ}C$ at a heating rate of $5^{\circ}C$/min. for the specimens aged at 130, 160, $190^{\circ}C$ and $220^{\circ}C$ for various times after solution treatment at $540^{\circ}C$ for 30 minutes. The peaks due to the formation of G.P.zone were not detected in the specimens aged at 130 and $160^{\circ}C$, but those at 190 and $220^{\circ}C$ appeared in DSC curves. The heat absorption due to the dissolution of ${\delta}^{\prime}$ phase was increased with increasing aging time at $130^{\circ}C$ aging. In contrast, those values for the specimens aged at 160 and $190^{\circ}C$ were initially increased and inversely decreased at the transition time of 72 and 1 hour, respectively. The heat evolution due to the formation of $T_1$ phase was nearly unchanged at $130^{\circ}C$ aging, but at $160^{\circ}C$ and $190^{\circ}C$ aging, drastically decreased after the transition time. It can be considered that the increase of $T_1$ phase results in the decrease of ${\delta}^{\prime}$ phase when aging time is longer than the transition time. The hardness of the specimen aged at $190^{\circ}C$ is initially higher compared with that at $160^{\circ}C$, however, the peak hardness shows the lower value than that at $160^{\circ}C$.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.61-72
• /
• 2018

The aim of this present study was to investigate the impact of different seeding rate and nitrogen fertilizing levels on the seed yield and feed value of oats(Avena sativa L.) grown in Gyeongbuk area for two years. The experiment was arranged in split plot design with 3 main plots(100, 130 and 160 kg of seed/ha) and 4 subplots(0, 50, 70 and 90 kg N/ha), with 3 replicates. Heading, flowering, and maturing dates of oats sown in spring 2017, delayed by two days compared to that of spring 2016, and the plant height of spring 2017 were significantly shorter than that of spring 2016(18.1 ~ 23.4 cm). In addition, the highest number of stems and number of panicles according to different seeding rate and nitrogen fertilizing levels were achieved with the seeding rate of 160 kg/ha and 90 kg of N/ha in 2016 and 2017, respectively. In case of seed yield as affected by different seeding rate, the highest seed yield was achieved with a seeding rate of 130 kg/ha(p<0.05), and based on nitrogen fertilizing levels, the highest yield was obtained in 50 kg of N/ha compared to others. The crude fiber(CF), neutral detergent fiber(NDF) and total digestible nutrients(TDN) of oats cultivated and harvested in spring 2016 and 2017 according to different sowing rate were the highest in the seeding rate of 130 kg/ha. The crude protein(CP) content and total digestible nutrients(TDN) of 2016-2017 as influenced by nitrogen fertilizer levels were the highest in the nitrogen fertilizer level of 90 and 50 kg N/ha, respectively. In conclusion, the proper seeding rate and the optimal nitrogen fertilizing level in Gyeongju, Gyeongbuk province were considered to be the most appropriate in 130 kg/ha and 50 kg of N/ha, respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.130-135
• /
• 2016

Gait recognition has advantage of non-contact type recognition. But It has disadvantage of low recognition rate when the pedestrian silhouette is changed due to bag or coat. In this paper, we proposed new method using combination of gait energy image feature and thermal face image feature. First, we extracted a face image which has optimal focusing value using human body rate and Tenengrad algorithm. Second step, we extracted features from gait energy image and thermal face image using linear discriminant analysis. Third, calculate euclidean distance between train data and test data, and optimize weights using genetic algorithm. Finally, we compute classification using nearest neighbor classification algorithm. So the proposed method shows a better result than the conventional method.