• Korean Journal of Agricultural Science
• /
• v.51 no.1
• /
• pp.1-8
• /
• 2024

We conducted this research to examine the reducing level of lysine : tryptophan ratios in the diet affected the performance and meat quality of finishing pigs. At the end of the experiment, 144 crossbred finishing pigs (Duroc × [Yorkshire × Landrace]) having an average body weight of 70.6 ± 3.9 kg were randomly assigned to four dietary treatments (9 replications, 4 pigs per pen). The pigs in the 4 treatments were fed diets with different lysine : tryptophan ratios, such as 1 : 0.175, 1 : 0.160, 1 : 0.145, and 1 : 0.130. In considering average daily gain (ADG), average daily feed intake (ADFI), and feed conversion ratio (FCR), the ratio of tryptophan and lysine (Lys : Trp) did not show any significant effect (p > 0.05). Moreover, nutrient digestibility had no significant impact (p > 0.05). However, the decreasing level of tryptophan linearly decreased the back-fat thickness at overall period (p = 0.038) and reduced at week 5 (p = 0.007). Additionally, the lean meat percentage (LMP) showed a tendency to increase at initial (linear effect, p = 0.097) and increased at overall period (linear effect, p = 0.045). Therefore, we suggest that Lys : Trp ratio of 0.130 could enhance the meat quality in finishing pigs.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.73-78
• /
• 1993

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.75-76
• /
• 2001

• 대학교육
• /
• s.5
• /
• pp.116-130
• /
• 1983

• Korean Architects
• /
• s.644
• /
• pp.122-130
• /
• 2022

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.667-682
• /
• 2014

The effects of liquid pig manure (LM) on the yield and quality of rice as well as soil chemical properties were determined in the field of sandy loam soil under the different fertilizer management. Treatments consisted of 100%, 130% and 160% N application rates of liquid manure as calculated on the basis of the recommended rate of nitrogen (9 kg N/10a) for rice cultivation. Chemical fertilizer (CF) was used as control. Concentrations of T-N and T-P in paddy water were measured by 5-day intervals up to 20days after application. LM treatments significantly increased T-N concentrations in paddy water proportionally with increasing rates of LM (13.2 to 25.7 mg/L). Similarly Total-P content in paddy water was increased right after LM applications but was well below the quality standard of wastewater and manure. Plant height and tillers in 100% and 130% N LM treatments were lower than those in CF control. In the 160% LM treatment, however, plant height and numbers of tillers were higher than those in the CF control. Yields in 100% LM and 160% LM plots were decreased by 3 and 5%, respectively, as compared with 422 kg per 10a in the CF plot. Rice protein contents were similar between 100% LM and CF control (about 6.8%) but it was increased to 7.2% and 7.7% in 130% LM and 160% LM treatments, respectively. Toyo-taste value in the 100% LM treatment was higher than in CF control plot. The proportions of perfect grain of the brown rice were lower in 130% LM and 160% LM treatments than that in CF control. Soil organic matter content, heavy metal and exchangeable cations were highest in the 160% LM plot. Thus considering yield and quality of rice and heavy metals contents in soil, 130% N basal application of liquid manure can be recommended for rice cultivation in this experiment.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.39-46
• /
• 2013

In this paper, organic solar cells(OSCs) based on bulk-heterojunction structures were fabricated by spin coating method using polymer P3HT and fullerene PCBM as a photoactive layer. The fabricated OSCs had a simple glass/ITO/PEDOT:PSS/P3HT:PCBM/Al structures. The photoactive layer of mixed P3HT:PCBM was formed with 1:1 weight ratio. The hole transport layer(HTL) was used conducting polymer PEDOT:PSS concentration with gold nanoparticles. The annealing temperature and concentration of nanoparticles in HTL were verified to improve the OSC characterization. The percentage of gold nanoparticles in HTL were 0.5 wt% and 1.0 wt%, and the surface morphology, electrical properties and absorption intensities were investigated. The devices were 0.5 wt%, and the highest 3.1% of the powder conversion efficiency(PCE), 10.2 $mA/cm^2$ of the maximum short circuit current density($J_{SC}$), 0.535V of the open circuit voltage($V_{OC}$) and 55.8% of the fill factor(F.F) could be obtained when the nanoparticle concertration was 0.5 wt%. The annealing temperature of HTL was $110^{\circ}C$, $130^{\circ}C$, $150^{\circ}C$ in vacuum oven and measured the absorption intensities, surface morphology, crystallinity and electrical properties were investigated. The best property was obtained in HTL annealed at $130^{\circ}C$ for gold nanoparticles of 0.5 wt%, showing that $J_{SC}$, $V_{OC}$, F.F and PCE were about 12.0 $mA/cm^2$, 0.525V, 64.2% and 4.0%, respectively.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.91-96
• /
• 2019

Microalgae do not require much land and make a higher efficient oil production. However, it costs still much higher than other biodiesel resources, such as crops. Sugars charge 80% of culture media when microalgae are massively cultured in the fermenter. This study aims to develop a cost-efficient process for sugar production from Chinese cabbage byproducts. Pre-treatment with 0.25% H₂SO₄ was most effective when chopped cabbage was incubated 50℃/130 rpm for 24 hours. To hydrolyze cabbage cellulose, we used cellulases secreted from Trichoderma. harzianum. T. harzianum was cultured at 28℃/pH 7/130 rpm for five days. Optimal enzymatic activity of cellulase was obtained by incubating at 0.24 FPU/ml/45℃/pH 5/130 rpm for three days. In comparison to other agricultural waste, such as rice straw, green tea leaves, and palm residue, Chinese cabbage produced the highest sugar yield. We found the optimal conditions to produce sugar from Chinese cabbage byproducts as a carbon source to culture biodiesel-producing microalgae. The efficient process developed in this study helps microalgae as a sustainable alternative energy source by cost-down.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.105-115
• /
• 2000

This study was conducted to test a hypothesis that sensitivity of trees to ozone exposure was related to their growth rates. Two cultivars of Populus alba ${\times}$ P. glandulosa with different genetic growth potential were used for the comparison. Two clones(72-30, 72-16) of cultivar No. 4 with fast growing potential and three clones(71-28, 72-27, 72-19) of cultivar No. 2 with slow growing potential were propagated in early spring by cutting in $2-{\ell}$ plastic pots. They were grown outdoor for 5 months and exposed in late August for 30 days to 70 and 130ppb ozone in a open-top chambers(2.5m in diameter and 2m in height). Ozone concentration in a control chamber was maintained below 30ppb by filtering with activated charcoal. Each treatment was replicated twenty times. In a control chamber, cultivar No. 4 grew 73%, 64%, and 38% faster than cultivar No. 2 in leaf weight, root weight, and total dry weight, respectively. Visible injury was observed only in cultivar No. 4 in 130ppb treatment. Ozone treatment at both 70 and 130ppb decreased height growth, dry weight of leaf, root, and entire plants in all five clones. Particularly root growth was reduced by 39.7% and 13.8% in cultivar No. 4 and No. 2, respectively, in 70ppb treatment. Consequently, shoot/root ratio of cultivar No.4 was increased by 63.4%, while that of cultivar No.2 was increased by 22.1%. Stomatal conductance decreased more in cultivar No.4 than in cultivar No.2. Net photosynthesis of cultivar No.4 at 130ppb ozone decreased by 69.5%, while that of cultivar No.2 decreased by 31.5%. Above mentioned physiological responses of two cultivars to ozone strongly suggested that fast growing cultivar No.4 was more sensitive to ozone than slow growing cultivar No.2. It was concluded that sensitivity of trees to ozone exposure was closely related to their growth rates.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.12
• /
• pp.2024-2033
• /
• 2015

A gene encoding lipolytic enzyme, lip7-3, was isolated from Bacillus sp. W130-35 isolated from a tidal mud flat. The gene encoded a protein of 215 amino acids with a signal peptide composed of 34 amino acid residues. Lip7-3 belonged to the family I.4 lipase and showed its maximal activity at pH 9.0 and 60℃. Its activity increased in the presence of 30% methanol and, remarkably, increased as well to 154.6% in the presence of Ca²⁺. Lip7-3 preferred p-nitrophenyl octanoate (C8) as a substrate and exhibited broad specificity for short- to long- chain fatty acid esters. Additionally, Lip7-3 showed a low degree of enantioselectivity for an S-enantiomer (e.g., (S)-methyl-3-hydroxy-2-methylpropionate). It efficiently hydrolyzed glyceryl tributyrate, but did not hydrolyze glyceryl trioleate, fish oil, or olive oil. Its substrate specificity and activation by the solvent might offer a merit to the biotechnological enzyme applications like transesterification in the production of biodiesel.