• 한국유기농업학회지
• /
• 제11권4호
• /
• pp.93-102
• /
• 2003

This research was made to determine the optimum mixing ratio cattle manure and food waste investigating the effect that gets the growth and reproductive efficiency of earthworm and productivity of earthworm casts at processing process when handled cattle manure and food waste by vermicomposting, in order to establish the treatment system of organic wastes by vermicomposting. Survival ratio of earthworm was highest in the mixing ratio 80~100% : 20~0% of cattle manure and food Waste, and the increasing ratio was highest in cattle manure 100%, and the number of young worms, the weight of young worms and the productivity of earthworm casts in plots more than the mixing ratio 60% of cattle manure were significantly higher than in the other treatment plots(p<0.05). Total nitrogen and carbon contents in earthworm cast were decreased when rearing time of earthworm was increased. Carbon and nitrogen rate(C/N) of earthworm cast in plots more than the mixing ratio 80% of cattle manure was significantly higher than in the other treatment plots(p<0.05). pH in earthworm cast was higher than that in residual matter. The contents of electrolytic conductivity in the higher mixing ratio of food waste were significantly higher than those in the other treatment plots(p<0.05).

• 청정기술
• /
• 제18권4호
• /
• pp.404-409
• /
• 2012

본 연구는 교반강도 및 응집제 주입량의 변화에 따라 플럭의 성장특성이 인의 제거에 미치는 영향을 파악하고자 수행되었다. 본 연구에서는 Al/P 몰비를 1.0, 1.5와 2.0으로 급속혼화강도 G값을 100, 300과 500 $s^{-1}$로 변화시켜 수행하였다. 응집시 발생되는 응집지수(floc size index, FSI)와 크기가 다른 여과지를 이용하여 인의 제거율을 측정하여 성장 특성을 파악하였다. 연구결과 교반강도가 높을수록 용존인의 제거효율이 증가하였으며 Al/P 몰비가 낮을수록 교반강도의 영향이 컸다. T-P의 제거율은 Al/P 몰비 1.0 이하에서는 급속혼화 교반강도가 높을수록 높았으나 Al/P 몰비 1.0 이상에서는 G값 300 $s^{-1}$에서 가장 높은 제거 효율을 나타내었다. Al/P 비 1.0 이하에서는 G값 500 $s^{-1}$에서 가장 큰 FSI값을 나타내었으며, Al/P 몰비 1.0 이상에서는 G값 300 $s^{-1}$에서 가장 큰 FSI값을 나타내었다. 실제하수처리장 유출수를 대상으로 응집에 의한 인 제거에 Al/P 몰비와 급속혼화 강도의 영향은 인공조제수의 결과와 유사하였다.

• 대한환경공학회지
• /
• 제38권3호
• /
• pp.150-153
• /
• 2016

본 연구는 $TiCl_4$의 농도(0.25-0.59 mM)와 급속교반속도(100-250 rpm), 완속교반속도(30-60 rpm)의 변화가 인 제거효율에 미치는 영향을 알아보고자 하였다. 응집제 농도가 $0.25{\leq}[TiCl_4]{\leq}0.39mM$ 범위에서 인 제거 효율은 $TiCl_4$의 농도가 증가 할수록 증가하였으며 처리후 인의 농도는 0.2 mg/L 이하였다. 응집제 농도 0.39 mM, 급속교반속도 100 rpm, 완속교반속도 30 rpm에서 인 제거효율이 약 99%로 가장 높았다. $TiCl_4$의 농도가 낮을 경우(0.25-0.27 mM) 인제거효율의 편차는 급속교반속도 변화(2-3%)보다 완속교반속도 변화(7-10%)에서 더 민감하였다.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.132-140
• /
• 2022

본 연구에서는 데커신 및 데커시놀 안젤레이트를 이용한 최적의 로션 제조 공정을 확인하기 위하여 연구를 진행하였다. 초기 로션 제형은 3개월 동안 점도(5,208±112 cPs), 함량(99.71±1.01%) 및 pH(5.62)을 유지하는 것을 확인하였다. 제조 공정D 혼합 4의 최적 제조 공정 확인은 22+3 완전 배치 요인법을 이용하였으며, 독립변수로 혼합 온도(40-80℃)와 혼합 시간(10-30 min)으로 종속변수로써 중요품질특성인 함량, pH, 질량편차를 확인하였다. 함량 및 질량편차는 도출된 회귀방적식의 결정계수는 약 0.9였고 p-value값은 0.05보다 작아 모델적합성을 확인하였다. 로션 제조를 위한 최적의 온도조건과 혼합 시간은 61.93℃와 15.85분으로 확인되었다. 혼합4 공정에 있어 혼합 온도(60℃)와 혼합 시간(15 min)에서의 함량은 100.69%, pH는 5.57, 질량편차는 98.07%으로 예측되었고, 실제 검증에서는 각각 100.29±0.98%, 5.57±0.02, 98.27±0.89%으로 예측된 값에 대하여 유사한 결과까지 확인 할 수 있었다.

• 원예과학기술지
• /
• 제35권3호
• /
• pp.289-299
• /
• 2017

The objective of this study was to determine the effect of replacing perlite (PL) with pellets processed with poultry feather fiber as an inert material to prepare growing medium. The growth and flowering of Salvia splendens 'Vista Red' grown in individual growing medium $Biosangto^{(R)}$, peat moss (PM), PL, and two pellets (P45-1 and P45-2) were evaluated. Peat moss was mixed with PL, P45-1, or P45-2 at various ratios (1:0 to 1:3 or 3:1 by volume) to investigate the feasibility of replacing PL with pellets. Nutrient composition of the growing medium and leaf tissues was analyzed. The number of florets, inflorescence length, plant height, and fresh weight of plants grown in media containing P45-1 or P45-2 were reduced compared to those grown in individual growing medium PM or PL. As the mixing ratio of P45-1 or P45-2 to PM was higher, the growth of salvia, such as inflorescence length, plant height, number of leaves, and fresh weight was inhibited. Our results indicate that mixing three parts PM with one part of P45-1 (PM/P45-1/3:1) or P45-2 (PM/P45-2/3:1) accelerated flowering and increased the number of florets and leaves compared to other mixing ratios of PM and pellets media. The concentrations of phosphorus (P), calcium (Ca), boron (B), iron (Fe), and copper (Cu) in individual growing medium PL, P45-1, and P45-2 were significantly lower than those in PM. The concentration of N was the highest in leaves of plants grown in P45-1 or P45-2 amended media, and the concentrations of P, Ca, and zinc (Zn) in leaves were lower in individual growing medium P45-1 or P45-2 than in PM and PL. The pH of PM/P45-1/3:1 or PM/P45-2/3:1 media was maintained at optimal level (5.8-5.9) and the concentrations of macro- and micro-elements in the media and leaves were considered to be optimal levels. Therefore, mixing three parts PM with one part P45-1(PM:P45-1/3:1) or P45-2 (PM:P45-2/3:1) is recommended for improved growth and flowering in salvia. This suggests that P45-1 or P45-2 can replace PL as an inert material to prepare growing medium.

• 환경위생공학
• /
• 제14권3호
• /
• pp.31-38
• /
• 1999

The purpose of this study were to determine the optimum mixing ratio of sewage sludge and papermill sludge as carbon source required to SRB in treating abandoned mine drainage with natural purification wetland. If mixing sewage sludge/papermill sludge 2.0 SO42- reduced 46.2%, and then 30% in mixing ratio 0.5.Because sewage sludge was faster biodegradability than papermill sludge, effluent SCOD was 40mg/L in mixing ratio 0.5, and after that was all but regular. pH and ORP were almost neutral and -160mV, but after that was all but regular and it indicated that SRB activity was suitable. Fe removal rate was 60% in mixing ratio 2.0, and 54% in mixing ratio 0.5. In point of carbon source supply, It indicated that mixing ration 0.5 was considered as the most appropriate, because degradability of swewage sludge under short time was higher than that of papermill sludge.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.367-373
• /
• 2011

Mechanism of rapid mixing effect on chemical phosphorus removal is evaluated in this study. Assuming that chemical phosphorus removal is unaffected by mixing time, only rapid mixing intensity is evaluated. In order to find out the mechanism, it is hypothesized that rapid mixing affects the Al hydrolysis speciation, and that formation of more monomeric species ($Al^a$) results in better removal of phosphorus. According to a ferron assay, more $Al^a$ formed at higher mixing intensity than at lower intensity. Subsequent experiments revealed that better phosphorus removal was obtained at higher intensity than at lower intensity, in terms of the molar ratio of $Al_{added}/P_{removed}$. The proposed hypothesis was proved in this study. Chemical phosphorus removal is affected by rapid mixing intensity due to its effect on the Al hydrolysis speciation.

• 한국환경보건학회지
• /
• 제27권2호
• /
• pp.60-66
• /
• 2001

Natural organic matters(NOMs) are found everywhere such as soil, surface and ground waters and consist of both humic and nonhumic components, and their heterogeneith makes each source unique. This study was carried to evaluate the removal characteristics of NOMs by mixing coagulants and the variation of apparent molecular weight distribution(AMWD) in coagulation process. Ratio of optimum coagulants dosage for removal of DOC and turbidity by mixing coagulants was 1.83 mM F $e^{3+}$/mM $Al^{3+}$. DOC removal increased at lower pH. The pH6 control focused on the removal of organic matters could reduce the amount of coagulant consumption by 2 to 3 times based on the pH8.5 of natural water. The dissolved organic matters in the natural water from the mid-stream of Han River were composed of the low molecular weight(LMW,<1 K) of 59.7%, and the medium and high molecular weight(M.HMW, 1~30 K) of 40.3%, respectively. At pH6, the DOC removal efficiencies of LMW(<1 K) and M.HMW(1~30 K) in coagulation process were 27~35%, 62~72%, respectively. The fraction smaller than 1 K was not eliminated to a noticeable degree, while the fraction of 1~30 K was relatively well removed. In conclustion, mixing coagulants were fairly effective in the removal of natural organic matter.r.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.731-741
• /
• 1997

동일한 원수에 대하여 탁도제거 지배인자를 변화시켜가며 임펠러 형태별 탁도제거효율을 비교함으로써 관습적으로 설계 운영해오던 혼화과정의 문제점과 정수장의 최적 혼화저건을 만족시킬 수 있는 혼화기의 임펠러 타입 및 체류시간에 대한 운전기준을 제시하고자 하였다. 실험결과 혼화기의 종류는 탁도제거 효율을 물론 정수장의 경제적 운영을 위한 전력비 절감에도 효과가 있는 것으로 판명되었다. 또한 혼화지와 혼화기 설계기준에 일반적으로 활용되어 오던 속도구매 G이외에도 원수의 단위체적당 필요한 혼화에너지를 제시하여 정수효율은 물론 정수장의 경제적 운영효과를 극대화시킬 수 있는 참고자료로 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.920-925
• /
• 2008

In this presentation, a leaching experiment which is followed the pH changes(pH=4, pH=7) and the mixing rates(1%, 3%, 5%, 7%) was carried out to examine the arsenic reduction effects and the leaching characteristics on arsenic contaminated soil after stabilization treatment in which 5 materials were used as stabilization agencies, i.e. ZVI(zero valent iron), blast furnace slag, steel refining slag, quick lime, and oyster shell meal. Except for blast furnace slag, the arsenic removal rate increased as the mixing rate increases of stabilization agencies. Arsenic leaching concentration was indicated that pH=7 condition is higher than pH=4 condition. This result shows because arsenic immobilization reaction increases as pH decreases, and arsenic adsorption takes place as pH decreases.