• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2009

Hydrophilic Surface modification of Polysarene (PS) was performed by Atmospheric Pressure Plasma (APP). Air or 0, gases were used for carrier gases and RF power was changed from 150 to 350 W. We controlled the treatment time as 1 time to 4 time passing through the plasma region. when the carrier gas was air, the water contact angle on the PS surface was decreased from $91^{\circ}$ to $20^{\circ}$. And the surface energy increased from 45.74 dyne/cm to 68.48 dyne/cm. In case of the $O_2$ plasma treatment, at 300 W of RF power and 4 times treatment, the water contact angle on the PS. Surface was decreased from $91^{\circ}$ to $17^{\circ}$ and the surface energy was increased from 45.74 dyne/cm to 69.73 dyne/cm. The surface energy was increased by polar force not by dispersion force. Improvement of surface properties can be explained by the formation of new hydrophilic groups which is identified as C-O, C=O by XPS analysis. The contact angle of APP treated PS surface kept in air was increased with time elapse, but maintained same value when it was kept in water. We treated the PS surface by APP and deposited Cu as $4,000\;{\AA}$ and $8,000\;{\AA}$ by thermal evaporation. The adhesion between sample and Cu thin film improvement of treated PS surface against untreated sample. could be verifiable by Tape test (ASTM D3359)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.154-154
• /
• 2016

다공성 수지상 구리분말은 그 구조적 특성으로 인해 다양한 촉매 분야에 사용되어왔으며, 본 연구에서는 전해도 금욕의 종류에 따라 수지상 구리의 표면적 특성에 대해 연구하였다. 도금욕의 종류($CuSO_4$, $CuCl_2$, $Cu_2P_2O_7$), 인가 전위, 도금시간(1, 5, 10, 30min)에 따른 수지상 형상을 비교하였다. SEM 이미지 분석 결과 황산구리와 염화구리 도금용액에서는 plate-like dendrite 형상이 관찰되었으며, 피로인산구리 도금용액에서는 needle-like dendrite 형상이 관찰되었다. 정전위 실험결과 도금용액별 한계전류밀도에서 음(-)의 방향으로 100mV 낮은 지점의 인가 전위 및 도금시간 10분에서 3가지 용액 모두 가장 미세한 수지상 입자가 관찰되었다. 도금용액별 겉보기 밀도 및 BET 비표면적을 측정해본 결과 미세한 수지상일수록 겉보기밀도는 낮게 비표면적은 크게 측정되었다. 가장 낮은 겉보기 밀도와 가장 높은 BET 비표면적을 가지는 용액은 염화구리 도금용액이었으며 그 값은 $0.951g/cm^3$, $1.8052m^2/g$이었다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.378-384
• /
• 1997

The ruminal solubility of copper (Cu), manganese (Mn), molybdenum (Mo), and zinc (Zn) in eight Philippine forages was studied. These forages were: 1) grasses: paragrass (Brachiaria mutica (Forsk.) Stapf), stargrass (Cynodon plectostachyum Pilger), and napiergrass (Pennisetum purpureum Schumach.); 2) creeping legumes: calopogonium or calopo (Calopogonium muconoides Desv.) and centrocema (Centrocema pubescens Benth.); 3) tree lequmes: gliricidia or kakawate (Gliricidia sepium (Jacq.) Walp.), leucaena or ipil-ipil (Leucaena leucocephala (Lam.) de Wit.), and sesbania or katuray (Sesbania grandiflora (L.) Poir). Nylon bags with samples were incubated for 0, 3, 6, 12, 24, 48 and 72h in three rumen cannulated sheep fed with timothy hay (Phleum pratense L.) at 2% body weight/d. The 0-h bags were washed with deionized water. There were species differences (p < 0.05) on the different solubilities of trace elements. At O-h incubation, the trend of solubility was Mo (54%) > Zn (43%) > Cu (38.7%) > Mn (29.5%). At 3-h incubation, all the elements except Mn had an average solubility above 50%. Combining particulate passage rate (1.9%/h) and various trace elements disappearance rates, the effective ruminal solubilization (ERS) of trace elements were computed. The ERS across species ranged from 44.6 to 89.9% for Cu, 29.9 to 84% for Mn, 66 to 95.1% for Mo, and 30.1 to 82.3% for Zn resulting to a trend of Mo > Zn > Cu > Mn.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3400-3404
• /
• 2011

A new rhodamine B-coumarin conjugate (1) capable of recognizing both $Cu^{2+}$ and $Fe^{3+}$ using two different detection modes have been designed and synthesized. The metal ion induced optical changes of 1 were investigated in $CH_3CN-H_2O$ (1:1, v/v, HEPES 50 mM, pH = 7.0) solution. Sensor 1 exhibits selective colorimetric recognition of $Cu^{2+}$ and fluorescent recognition of $Fe^{3+}$ with UV-vis and fluorescence spectroscopy, respectively. Moreover, both of the $Cu^{2+}$ and $Fe^{3+}$ recognition processes are observed to be barely interfered by other coexisting metal ions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.374-374
• /
• 2011

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 일반적으로 Soda lime glass/Mo/CIGS/CdS/ZnO/ITO/Al의 구조로 제작된다. 태양전지는 p형과 n형 반도체의 접합에 의해서 동작을 하게 되며, CIGS 박막 태양전지에서는 p형으로 CIGS 박막과 n형으로 CdS 박막이 사용된다. CIGS 박막태양전지에서는 p형과 n형이 서로 다른 물질로 이루어진 이종접합을 이루게 되고, 계면에서의 밴드가 어떻게 형성이 되느냐에 따라 태양전지 성능에 영향을 미치게 된다. p형의 CIGS 박막은 주로 다단계 증발법에 의해 형성되고 3단계 공정조건에 의해 계면의 특성에 많은 영향을 미치게 된다. n형의 CdS 박막은 주로 chemical bath deposition (CBD) 법에 의해 제작된다. 이렇게 제작되는 CBD-CdS는 시약의 농도, pH (수소이온농도), 박막 형성시의 온도 등의 조건에 따라 특성이 변하게 된다. 본 논문에서는 3단계 공정시간을 변화시켜 제작된 CIGS 박막 위에 CBD-CdS 증착 조건 중 thiourea 의 농도를 변화시켜 CIGS 태양전지를 제작하고 그에 따른 특성을 살펴보았다. CIGS 박막은 3단계 공정시간을 490초와 360초로 하여 제작하였고, CdS 박막은 thiourea 농도를 각각 0.025 M과 0.05 M, 0.074 M, 0.1 M로 변화시켜가며 제작하였다. 제작된 CIGS 박막 태양전지는 CIGS 3단계 공정시간과 thiourea의 조건에 따라 최고 15.81%, 최저 14.13%로 나타내었다. 또한, 외부양자효율을 측정하여 제작된 CIGS 박막 태양전지의 파장에 따른 특성을 비교하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.159-163
• /
• 2013

A new Rhodamine B hydrazide hydrazone 1 has been synthesized and investigated as a colorimetric and fluorescent "off-on" sensor for the recognition of $Cu^{2+}$ in $CH_3CN/H_2O$ (1:1, v/v, HEPES 10 mM, pH = 7.0) solution. Sensor 1 displayed highly selective, sensitive and rapid recognition behavior toward $Cu^{2+}$ among a range of biologically and environmentally important metal ions. Sensor 1 bind $Cu^{2+}$ via a 1:1 stoichiometry with an association constant of $1.92{\times}10^6\;M^{-1}$, and the detection limit is evaluated to be $7.96{\times}10^{-8}\;M$. The $Cu^{2+}$ recognition event is reversible and is barely interfered by other coexisting metal ions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.322-327
• /
• 2003

Giant magnetoresistance(GMR) NiO multilayer, which has been used to reading head of highly dense magnetic recording, was fabricated, and oxidized in an air during 80 days to study the dependence of magnetoresistance properties on residual stress in the interfaces. The magnetoresistance ratio and the exchange biasing $field(H_{ex})$ of $NiO(60nm)/Ni_{81}Fe_{19}(5nm)/Co(0.7nm)/Cu(2nm)/Co(0.7nm)/Ni_{81}Fe_{19}(7nm)$ spin valves were increased from 4.9% to 7.3%, and 110 Oe to 170 Oe after natural oxidation in the atmosphere for 80 days, respectively. The sheet resistivity ${\rho}$ decreased from $28{\mu}{\Omega}m$ to $17{\mu}{\Omega}m$, but ${\Delta}p$ did not almost change after the oxidation. Therefore, the increase of MR ratio is due to the decrease in the sheet resistivity. the reduced resistance may result from the increase in the reflection of conduction electrons at the oxidized top surface. Also, the increase in the exchange biasing field is originated from the reduction of residual stress at the interface of $NiO/Ni_{81}Fe_{19}$ according as the aging time increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.17-22
• /
• 2017

Effects of pH value and deposition time on the electrical properties of (NMC) Ni-Mn-Cu-O and (NMCC) Ni-Mn-Cu-Co-O thin films were investigated. The NMC and NMCC films were prepared by spin spray method. The crystal structure and thickness of the annealed films were changed by the pH value and deposition time, respectively. A single phase of cubic spinel structure was confirmed for the annealed films deposited from solutions with pH 7.6. The resistivity of the annealed films was affected by the crystal structure and microstructure. The TCR (temperature coefficient of resistance) was dependent on the $Mn^{3+}/Mn^{4+}$. Typically, the resistivity of $70.5{\Omega}{\cdot}cm$ and TCR of -3.56%/K at room temperature were obtained for NMCC films deposited from solutions with pH 7.6 for 5 min, and annealed at $450^{\circ}C$ for 3 h.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.893-899
• /
• 2000

To measure antioxidative activities, the various extracts from Ulmus devidiana were examined in oil emulsion. Water, ethanol, methanol and butanol were used as extract solutions. The activity oxygen species ($H_2O_2,-OH,\;KO_2$) bound the extracts for antioxidative activities were excellent. The extracts bound $Fe^{2+}$ ion and $Cu^{2+}$ ion showed effective antioxidative activities and strong chelating effects. The concentration of $Fe^{2+}$ ion and total ion in ethanol and methanol extracts from Ulmus devidiana root parts (Chinese) were higher than those of the other products. The highest superoxide dismutase-like activities showed butanol extracts from Ulmus devidiana root parts (Chinese) and water extracts from Ulmus devidiana bark parts (Korean). Electron donating abilities and nitric scavenging abilities of ethanol, methanol and butanol extracts were higher than those of water extracts. The nitrite scavenging abilities also reached the maximum at pH 1.2 and the minium at pH 6.0.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.136-139
• /
• 2003

Copper has attractive properties as a multi-level interconnection material due to lower resistivity and higher electromigration resistance as compared with Alumina and its alloy with Copper(0.5%). Among a variety of agents in Copper CMP slurry, $H_2O_2$ has commonly been used as the oxidizer However. $H_2O_2$ is so unstable that it requires stabilization to use as oxidizer Hence, stabilization of $H_2O_2$ is a vital process to get better yield in practical CMP process. In this article the stability of Hydrogen Peroxide as oxidizer of Copper CMP slurry has been investigated. When alumina abrasive was used, $\gamma$-particle Alumina C had a better stability than $\alpha$-particle abrasive. As adding KOH as pH buffering agent, $H_2O_2$ stability in slurry decreased. Urea hydrogen peroxide was used as oxidizer, an enhanced stability was gotten. When $H_3PO_4$ as $H_2O_2$ stabilizer was added, the decrease of $H_2O_2$ concentration in slurry became slower. Even though adding $H_2O_2$ in slurry after bead milling lead to better stability than in advance of bead milling, it had a lower dispersibility.