• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.33-34
• /
• 2005

In this study, in odor to develop low temperature sintering multilayer piezoelectric actuator and ultrasonic vibrator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$ and $Na_2CO_3$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the addition of dopant CuO and $Fe_2O_3$, respectively. The CuO added PMN-PNN-PZT ceramics improved mechanical quality factor Qm due to the acceptor doping effect. And also, $Fe_2O_3$ reacted as softner in this composition system in addition to the increase of grain size and sinterability. Taking into consideration electromechanical coupling factor kp of 0.62, dielectric constant $\varepsilon_r$, of 1275, Piezoelectric $d_{33}$ constant of 377[pC/N] and mechanical quality factor Qm of 975, it was concluded that the ceramics with the $Fe_2O_3$, added composition sintered at 900[$^{\circ}C$] were best for the multilayer piezoelectric actuator and ultrasonic vibrator application.

• Journal of Food Hygiene and Safety
• /
• v.13 no.1
• /
• pp.6-13
• /
• 1998

This study was carried out to investigate the antioxidative activity on oxidaton of human low density lipoprotein from marine microorganisms. Bacillus sp. RH-5 producing antioxidative activity have been isolated and identified from coast sea in Pusan. Bacillus sp. RH-5 produced at highest level of antioxidative activity in the medium of 1.0% glucose, 0.25% polypepton, 0.25% yeast extract, 0.01% $FeSO_4{\cdot}7H_2O$ and 50% sea water. The optimal medium pH, cultural temperature and shaking time for the highest production as the antioxidant were 7.0, $30^{\circ}C$ and 48 hr, respectively. The culture broth inhibited the copper catalyzed oxidation of human low density lipoprotein (LDL) at the concentration of 500 and $1,000\;\mu\textrm{g}/ml$ ethylacetate extracts in the presence of $5\;\mu\textrm{M}\;CuSo_4$. The electrophoretic mobility of the LDL oxidized in the presense of $5\;\mu\textrm{M}\;CuSo_4$ was higher than that of native LDL.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.823-828
• /
• 2004

The crystal structures of sparteinium tetrachlorocuprate monohydrate $[(C_{15}H_{28}N_2)CuCl_4{\cdot}H_2O]$, 1 and sparteinium tetrabromocuprate monohydrate $[(C_{15}H_{28}N_2)CBr_4{\cdot}H_2O]$, 2, were determined. The structures of 1 [orthorhombic, $P2_12_12_1$, a = 8.3080(10) ${\AA}$, b = 14.6797(19) ${\AA}$ and c = 16.4731(17) ${\AA}$], and 2 [orthorhombic, $P2_12_12_1$, a = 8.4769(7) ${\AA}$, b = 15.166(3) ${\AA}$ and c = 16.679(3) ${\AA}$], are composed of a doubly protonated sparteinium cation, $[C_{15}H_{28}N_2]^{2+}$, a discrete $CuX_4^{2-}$ anion $(X=Cl^-\;or\;Br^-)$, and one water molecule. These monomeric compounds are stabilized through various types of hydrogen bonding interaction in their packing structures. Crystal 2 exhibits weak anti-ferromagnetism (J = -3.24 $cm^{-1}$) as opposed to the magnetically isolated paramagnetism observed for 1. The results of comparative magneto-structural investigations of 1 and 2 suggest that the pathway for the weak anti-ferromagnetic super-exchange in 2 might be through a Cu-Br${\cdots}$Br-Cu contact.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.275-283
• /
• 2012

MCM-41(Mobil's Composition of Matter-41) and expanded graphite(EG) were investigated as potential adsorbents for heavy metal ions including Pb(II), Cu(II) and Ni(II) in various aqueous chemistries. MCM-41 showed shorter equilibrium times and higher adsorption capacities for all three heavy metal ions compared to expanded graphite. The adsorption of three heavy metal ions was significantly affected by the solution pH due to the competition with $H_{3}O^{+}$ at lower pH and precipitation at neutral or higher pH. Adsorptions of heavy metal ions onto MCM-41 and expanded graphite were successfully described with the pseudo-second-order model. During the competitive adsorption of three heavy metal ions, the selectivity of Pb(II) was highest and almost same selectivity was observed with Cu(II) and Ni(II) when MCM-41 was used as an adsorbent, while the expanded graphite exhibited the highest selectivity to Pb(II), followed by Ni(II) and Cu(II).

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.954-959
• /
• 1999

Radiation-induced grafting of 2-hydroxyethyl methacrylate(HEMA), acrylic acid(AAc) and methacrylic acid(MAAc) onto polypropylene microfiltration membrane has been studied. The effect of grafting conditions such as solvent composition(MeOH and $H_2O$) and monomer concentration on the grafting yield in investigated. The highest degree of grafting is obtained at a solvent composition of 25% $H_2O$:75% MeOH for HEMA, pure water for AAc and 50% $H_2O$:50% MeOH for MAAc. Modification of the PP membranes with hydrophilic monomers is shown to cause an increase in the water permeation flux of the membranes. It is found that HEMA is the best monomer to increase the water permeation flux and the highest water permeation flux is obtained at 99% degree of grafting. The water permeation flux of AAc-grafted PP membrane and MAAc-grafted PP membrane is very sensitive to environmental pH and $Cu^{2+}$ ion, but the water permeation flux of HEMA-grafted PP membrane scarcely depends on pH and $Cu^{2+}$ ion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.162-165
• /
• 2003

The corrosion characteristics of diffusion barrier in Copper CMP has been investigated. Key experimental variables that has been investigated are the corrosion rate by different agents containing slurry of Cu CMP. Whenever Cu and Ta films were corroded adding each oxidizer, the corrosion rate of Ta was much lower than that of Cu. That is, the difference in the corrosion rates of Ta by oxidizer was not larger as compared with Cu. As corroded by complexing agents, the corrosion rate of Ta was close to O. The corrosion rate of Ta increased as added $HNO_3$ and $CH_3COOH$ compared with the reference slurry; on the other hand, it decreased with addition of HF. In addition, resulting corrosion rate went up with lower pH of agent. The corrosion rates by agents were however significant small; hence, it doesn't affect on the removal rate of Cu CMP practically. Consequently, this can be explained by assuming that the mechanical effect dominates than the chemical effect on the polishing rate of Ta(TaN).

• Microbiology and Biotechnology Letters
• /
• v.18 no.6
• /
• pp.591-598
• /
• 1990

Six species under the basidiomycetes were screened for extracellular tannase (tannin acyl hydrolase EC 3.1. 1.20) production in submerged culture and Lenzites betulina was found to be most effective for the production of tannase. The optimum cultural conditions for tannase production were $25^{\circ}C$, pH 6.0 and 21 days of culture period, The efficient composition of culture medium for the production of tannase was performed in synthetic medium containing tannic acid, 2g; sucrose, 5g; bacto-peptone, 2g; ,$ KH_2PO_4, \;2g,\; MgSO_4.7H_2O \;0.5g,\; CuS0_4.5H_2O$, 2 mg; thiamine HCl, 100 ug and distilled water 100 ml, The tannase produced from Lenzites bdulin*r was 223.3 unit (umole of gaUic acidiml of brothlmin). The tannase had an optimal reaction conditions ofpH 6.0 and temperature of $40^{\circ}C$. The enzyme was stable at temperature below $40^{\circ}C$ and lost its activity by 50% above $60^{\circ}C$. And the stable pH range was 5.5 to 6.0.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.641-649
• /
• 2002

The redox properties of a homogeneously-precipitated $TiO_2$ rutile powder with a BET surface area of ~$200 m^2$/g, consisting of an acicular primary particle, were characterized using photocatalytic reaction in aqueous 4-chlorophenol, Cu-EDTA and Pb-EDTA solutions under ultraviolet irradiation, compared to those of commercial P-25 X$200 m_2$ powder with a spherical primary particle as well as home-made anatase $TiO_2$ powder with ~$200 m^2$/g BET surface area. Here, the anatase powder also includes mainly the primary particles very similar to the acicular shapes of the rutile $TiO_2$ powder. The rutile powder showed the fastest decomposition rate and the largest amount in the photoredor, compared with the anatase or P-25 powder, while the anatase powder unexpectedly showed the slowest rate and the smallest amount in the same experiments regardless of almost the same surface area. From results, the excellent photoredox abilities of this rutile powder appears to be due to specific powder preparation method, like a homogeneous precipitation leading to direct crystallization from the solution, regardless of their crystalline structures even when having the similar particle shape and surface area.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.265-271
• /
• 2007

Electromagnetic wave absorbing materials have been developed to reduce electromagnetic interference (EMI) for electronic devices in recent years. In this study, Fe-Si-B-Nb-Cu base amorphous strip was pulverized using a jet mill and an attritor and heat-treated to get flake-shaped nanocrystalline powders, and then the powders were mixed, cast and dried with dielectric $Al_{2}O_{3}$ powders and binders. As a result, the addition of $Al_{2}O_{3}$ powders improved the absorbing properties of the sheets noticeably compared with those of the sheets without dielectric materials. The sheet mixed with 2 wt% $Al_{2}O_{3}$ powder showed the best electromagnetic wave absorption, which was caused by the increase of the permittivity and the electric resistance due to the dielectric materials finely dispersed on the Fe-based powder.