• Journal of Magnetics
• /
• v.2 no.2
• /
• pp.35-37
• /
• 1997

A sample of YBa2Cu3O7-x fluorinated by a high temperature (400$^{\circ}C$) gas exchange technique has been investigated by means of 19F NMR (nuclear magneti resonance) measurements in both superconducting and normal state. As a result, behaviors characteristic of the superconductor, including a peculiarity in the spin-lattice relaxation rate (1/T1) around 250 K, were observed.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.2
• /
• pp.5-9
• /
• 2023

The effect of La_0.7Sr_0.3MnO₃ (LSMO) addition on the superconducting property of Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_10+δ ((Bi, Pb)-2223) polycrystalline samples was studied. LSMO (0.3 wt.% to 2.0 wt.%) added (Bi, Pb)-2223 samples were prepared by using a solid-state reaction method. The XRD analyses show that as the LSMO addition increases, the volume fraction of the Bi-2223 phase is gradually decreased. The critical temperature (T_c) exhibits a gradual decrease with a single transition as the LSMO amount increases up to 1.0 wt.%, but a further addition of LSMO induces an abrupt decrease of T_c with a dual transition. The analyses on the local structure of the CuO₂ plane from the X-ray absorption fine structure (EXAFS) measurements showed that for the samples with low concentration of LSMO up to 1.0 wt.%, the Cu-O bond length and the CuO₂ plane ordering do not degrade from the values of pure (Bi, Pb)-2223, while they get worsen with a further increase of LSMO addition. These results open up the possibility of LSMO as artificial pinning centers of the (Bi, Pb)-2223 system for power application.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.143-149
• /
• 1990

A sol-gel processing of $YBa_2Cu_3O_{7-x}$ superconductor using metal nitrate salts and sodium hydroxide as the starting materials has been investigated because of the need to produce pure, hompgeneous superconducting materials. Since the precipitation of barium hydroxides can be obtained only at high basicities, the process has to be carried out Ca. pH 13 to get the simultaneous coprecipitation with the other metal hydroxides. The involved reaction mechanisms were investigated and intermediate and final products were characterized by means of thermogravimetric analysis(TGA), infra-red(IR) spectroscopy, X-ray diffraction(XRD) analysis, scanning electron microscopy(SEM), thermal mechanical analysis(TMA) and electrical measurement.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.227-233
• /
• 1994

The Bi-Sr-Ca-Cu-O thin films were deposited by RF-magnetron sputtering method on Si(P-111) wafer without a buffer layer and annealed at various temperatures in oxygen atmosphere. The temperature dependence of electrical resistance, the microstructure of intermediate phase, and the surface morphology of films were examined by four probe method, XRD, and SEM, respectively. The chemical composition and the depth profile of the films were determined by ESCA spectra. Thin films annealed at $600^{\circ}C$ and $700^{\circ}C$ in oxygen atmosphere showed onset temperatures of 90 K and 85K, and Tc(zero) of 22K and 31K, respectively. The sample annealed at $700^{\circ}C$ had the highest volume fraction of superconducting phase and showed smooth microsturcture. In ESCA spectra, the thin films were homogeneous with depth.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.299-301
• /
• 1989

This study presents a method of preparing $YBa_2Cu_3O_{7-x}$ ceramic and chlorine doping in it for the purpose of Jc enhancement us ins sol-gel process.Tetramethylammonium-hydroxide and pottasium carbonate solution were added to the aqueous solution of Yttrium nitrate, Barium chloride and Copper nitrate for pH control as well as forming hydroxy-carbonate precipitation. Instead of Barium nitrate, Barium chloride was used for doping chloride impurities in the specimen. The resulted materal showed good high Tc-superconductivity after calcination. Tc and Jc value are 92 K and 120.8 $A/cm^2$ respectively.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.119-121
• /
• 1989

The properties of Pb-doped Bi-Sr-Ca-Cu-O Super-conductors prepared by solidstate reaction have been studied. Zero resistance was attained at l03K for the sample sintered 845[$^{\circ}C$]for 264hours and it was depended upon sintering conditions. From XRD data low Tc phase and high Tc phase were observed and the volume fraction of high Tc phase increased with increase in sintering period. The grain size increased with increase in sintering temperature and time.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.55-59
• /
• 2020

Copper Oxide (CuO) films were deposited on the n-type silicon wafer by rf magnetron sputtering for heterojunction solar cells. And then the samples were treated as a function of the annealing temperature (300-600℃) in a vacuum. Their electrical, optical and structural properties of the fabricated heterojunction solar cells were then investigated and the power conversion efficiencies (PCE) of the fabricated p-type copper oxide/n-type Si heterojunction cells were measured using solar simulator. After being treated at temperature of 500℃, the solar cells with CuO film have PCE of 0.43%, Current density of 5.37mA/㎠, Fill Factor of 39.82%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.198-203
• /
• 2000

This paper investigated the effects of doping elements on the Bi-Sr-Ca-Cu-O ceramics. The doping elements can be classified into four groups depending on their superconducting characteristics in the Bi-Sr-Ca-Cu-O structure. The first group of doping elements(Co, Fe, Ni and Zn) substitute into the copper site and can reduce the critical temperatures of the 2223 and 2212 phases. The second group of doping elements(Y and La) substitute into the Ca site and cause the disappearance of the 2223 phase and increase the critical temperatures in the 2212 phase. The third group of doping elements(P and K) have a tendency to decompose the superconducting phase and reduce the optimal sintering temperature. The fourth group of doping elements(B, Si, Sn and Ba) almost unaffected the superconductivity of the 2223 and 2212 phase.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.379-383
• /
• 1990

$YBa_2Cu_{3-x}Ni_xO_{7-{\delta}}$, with x = 0.05, 0.2, 0.4, 0.7 and 1.0 had been prepared by the thermal decomposition of corresponding nitrates. Among them, the sample with x = 0.05 shows above-liquid-$N_2$ temperature superconductivity with $T_c$ of 88.7K. According to the X-ray diffraction analysis, its crystal symmetry was estimated as orthorhombic with the lattice parameters of a = 3.866${\AA}$, b = 3.893${\AA}$, c = 11.715${\AA}$. The chemical composition of the sample was determined by electron probe microanalysis and the chemical composition around its grain boundaries was carefully studied by the X-ray line scanning technique. From the observed binding energy of Ni-$2p_{3/2}$ orbital electron (B.E. = 853 eV) measured by X-ray photoelectron spectroscopy, the valency state of nickel stabilized in $YBa_2Cu_{2.95}Ni_{0.05}O_{7-{\delta}}$ oxide lattice could be determined to be Ni(II).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.27-32
• /
• 2000

Porous glass ceramics composed of $Ag_2-Li_2O-CaO-TiO_2-P_2O_5$-CaO with 0.05-1.5 mole CuO were prepared by melting and 2 step heat treatment for nucleation at $610^{\circ}C$ and crystallization at $840^{\circ}C$. $\beta$-$Ca_3(PO_4)_2$crystal phase was selectively leached out in 1N-HC1 solution for 3 days, leaving $AgTi_2(PO_4)_3$and $LiTi_2(PO_4)_3$crystal phases. Antibacterial effects and characterizations of the porous glass ceramics were investigated. Staphylococcus aureus and Salmonella typhi bacteroa were used in this study. It was found that the resultant porous glass ceramics show excellent bacteriostatic properties.