• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.806-819
• /
• 1995

A study of radiative heat heat transfer has been done in the non-orthogonal coordinate system utilizing the finite volume method and the P.1 approximation. Radiation of absorbing, emitting and scattering media in a concentric annulus has been solved using the non-orthogonal coordinate and the calculations were compared with the existing results. The results obtained from the analysis using the finite volume method are in good agreement with the existing calculations for all optical thicknesses. It was also shown that for only optically thick cases, P-1 approximation can be used in a non-orthogonal coordinate. Convective heat transfer analysis has been carried out to obtain the temperature fields in a cross flow around a circular cylinder and the finite volume method was applied in the non-orthogonal coordinate system to analyze radiative heat transfer. Effects of the optical thickness, the ratio of the surface temperature of the cylinder tot he free stream temperature, and the scattering albedo on radiation have been presented.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.336-341
• /
• 2018

In general, the synthesis of poly(3-hexylthiophene)(P3HT)-based block copolymers requires at least a 4-5 step process. To control the molecular weight, molecular weight distribution, and block ratio, the reaction conversion and time should be monitored. In addition, the reaction scale usually limited to several mg to g was difficult to increase due to the limitations of living radical polymerizations. In this study, we synthesized P3HT-b-poly(4-vinylprydine) (P3HT-b-P4VP) with a final product quantity of > 19 g via a 2-step synthetic method with an anionic polymerization. In this method, the molecular weight and molecular weight distribution of P3HT-b-P4VP can be well controlled without monitoring the reaction conversion. We also studied physical properties of P3HT-b-P4VP depending on different solvent systems, which were investigated by UV-vis spectroscopy, atomic force microscopy, and ultraviolet photoelectron spectroscopy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4C
• /
• pp.175-183
• /
• 2010

The load distribution and deflection of large diameter piles are investigated by lateral load transfer method (p-y curve). The emphasis is on the effect of the soil continuity in a laterally loaded pile using 3D finite element analysis. A framework for determining a p-y curve is calculated based on the surrounding soil stress. The parametric studies that take into account the soil continuity are also presented in this paper. Through comparisons with results of field load tests, it is found that the prediction by the present approach is in good agreement with the general trend observed by in situ measurements and thus, represents a significant improvement in the prediction of a laterally loaded pile behavior. Therefore, a present study considering the soil continuity would be more economical pile design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• Korean journal of applied entomology
• /
• v.18 no.2 s.39
• /
• pp.63-71
• /
• 1979

Tests were made to find new non-mercurious seed disinfectants that were best for rice seeds. For these experiments four seed samples carr)?ing natural infection of Pyricularia oryzae, Helminthosporium oryzae, and Fusarium moniliforme were used and the following fungicides were used; Zinc Omadine, Sodium Omadine, Panoctine, Tecto-F, Benlate-T, Homai, Sisthane, $P_{242}$, Busan 30, Tecto-Wp and Terracoat Zn. Blotter method and water agar plate method used in the laboratory and growing-on test used in greenhouse. Results have shown that Sisthane, $P_{242}$ and Sodium Omadine have equal or superior effect to organic mercury compound against P. oryzae, H. oryzae, and F. moniliforme. Benlate T and Homai are effective against blast and Bakanae disease, but are inferior to organic mercury compound against brown spot disease. Busan 30 and Panoctine are effective against blast and brown spot disease, but have moderately inferior effects against F. monilifome. It is considered that the recommendable testing methods of seed treatment were blotter method for P. oryzae and water agar plate method for H, oryzae and F. moniliforme according to the experimental results obtained. No phytotoxicity against seed germination and seedling growth were observed when treated with disinfectants before germination of seeds.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1093-1100
• /
• 2015

Since the security of RSA cryptosystem depends on the difficulty of factoring integers, it is the most important problem to factor large integers in RSA cryptosystem. The Lenstra elliptic curve factorization method(ECM) is considered a special purpose factoring algorithm as it is still the best algorithm for divisors not greatly exceeding 20 to 25 digits(64 to 83 bits or so). ECM, however, wastes most time to calculate $M{\cdot}P$ mod N and so Montgomery and Koyama both give fast methods for implementing $M{\cdot}P$ mod N. We, in this paper, further analyze Montgomery and Koyama's methods and propose an efficient algorithm which choose the optimal parameters and reduces the number of multiplications of Montgomery and Koyama's methods. Consequently, the run time of our algorithm is reduced by 20% or so than that of Montgomery and Koyama's methods.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.196-202
• /
• 1999

Brown algae, Sargassum horneri, was used as an adsorbent to remove heavy metal Cd(II) and Pb(II) ions. Sargassum horneri picked in East Coast was formulated into the grain with the size of 40-60 mesh after wind dry. Batch method was used in order to investigate the adsorption rate by measuring the adsorption amounts with shaking time. In the column method, the adsorption amounts were measured by flowing metal solutions into the algae-packed column at the rate of 1 ml/min. Adsorption amounts in both batch method and column method were in the following order : pH 10.5>7.0>3.5. It was found that Pb(II) was more adsorbed on the algae grain than Cd(II). It was also revealed that the adsorption amounts reached the maximum within 5 minutes irrespective of pH condition in the batch method. It was concluded that the batch method was more effective than the column method in terms of recovery rate.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.391-396
• /
• 2015

To investigate the effect of the catalyst synthesis method on the oxidative dehydrogenation (ODH) of nbutenes, $BiFe_{0.65}MoP_{0.1}$ oxide catalysts were prepared with various synthesis methods such as co-precipitation, citric acid method, hydrothermal method, and surfactant templated method. The catalysts were characterized by X-ray Diffraction (XRD), $N_2$ sorption, and $NH_3/1$-butene-temperature programmed desorption ($NH_3/1$-butene-TPD) to correlate with catalytic activity in ODH reaction. Among the catalysts studied here, $BiFe_{0.65}MoP_{0.1}$ oxide catalyst prepared with co-precipitation method marked the highest activity showing 1-butene conversion, 79.5%, butadiene selectivity, 85.1% and yield, 67.7% after reaction for 14 h. From the result of $NH_3$-TPD, the catalytic activity is closely related to the acidity of the $BiFe_{0.65}MoP_{0.1}$-x oxide catalyst and acidity of the $BiFe_{0.65}MoP_{0.1}$ oxde catalyst prepared with co-precipitation method was higher than that of other catalysts. In addition, combined with the 1-butene TPD, the higher catalytic activity is closely related to the amount of weakly adsorbed intermediate (< $200^{\circ}C$) and the desorbing temperature of strongly adsorbed intermediates (> $200^{\circ}C$).

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.244-253
• /
• 2019

Purpose: Total hip arthroplasty was performed using a direct anterior approach (DAA) on an ordinary operation table and a short femoral stem. The clinical radiographic results were evaluated by a comparison with those performed using the modified hardinge (anterolateral approach, ALA) method. Materials and Methods: From January 2013 to November 2015, 102 patients who underwent total hip arthroplasty using DAA (DAA group) and the same number of patients using ALA (ALA group), both performed by a single surgeon, were compared and analyzed retrospectively. The operation time and amounts of bleeding were compared, and the improvement in post-operative pain, ambulatory capacity and functional recovery of the hip joint were checked. The location of insertion of the acetabular cup and femoral stem were evaluated radiologically, and the complications that occurred in the two groups were investigated. Results: The amount of bleeding was significantly smaller in the DAA group (p=0.018). Up to 3 weeks postoperatively, recovery of hip muscle strength was significantly higher in the DAA group (flexion/extension strength p=0.023, abduction strength p=0.031). The Harris hip score was significantly better in the DAA group for up to 3 months (p<0.001) and the Koval score showed significantly better results in the DAA group up to 6 weeks (p≤0.001). The visual analogue scale score improvement was significantly higher in the DAA group by day 7 (p=0.035). The inclination angle (p<0.001) and anteversion angle (p<0.001) of the acetabular cup were located in the safe zone of the DAA group more than in the ALA group, and there was no statistically significant difference in the position of the femur stem and leg length difference. During surgery, two cases of greater trochanter fracture occurred in the DAA group (p=0.155). Conclusion: The DAA performed in the ordinary operation table using a short femoral stem showed post-operative early functional recovery. Because a simple to use fluoroscope was used during surgery with an anatomical position familiar to the surgeon, it is considered to be useful for the insertion of implants into the desired position and for an approach that is useful for the prevention of leg length differences.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.71-78
• /
• 1997

본 논문에서는 InGaAsP 에피막에서 도핑 농도와 에피막의 미세조직구조가 photoluminescence (PL) 스펙트럼의 위치 및 형상에 어떤 영향을 미치는가를 연구하였고, 그 결과를 설명하기 위해 가능한 모델을 제시하였다. InGaAsP 에피막(발진파장 ~1.3$\mu$m) 을 액상증착법(liquid phase epitaxy, LPE)으로 성장하여 9K에서 PL측정을 했을 때 InGaAsP 활성층 내 Zn 억셉터의 유무에 따라 PL 피크의 위치가 최대 30nm (24meV)까지 shift하고 피크의 선폭도 넓어지는 현사을 발견하였다. 이와같은 피크 분산현상은 inGaAsP 에피막이 유기금속 기상증착법으로 성장되거나 Zn로 고농도로 도핑되거나 고온에서 어닐링 될 경우 대폭 감소하였다. 이를 설명하기 위해 여러 가지 모델을 설정하여 실험을 하였으며 이 중 InGaAsP 에피막의 미세조직구조 특히 Spinodal 분해에 의한 조성이 모듈레이션과 Zn의 상호작용의 관계가 이 현상을 설명하는 데 가장 적절하다는 것을 밝혔다.