• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.415-422
• /
• 2008

This study was carried out to investigate the effect of operating and design conditions of gas dispersion type of absorber on $SO_2$ removal efficiency. pH difference between upper and lower part of gas dispersing plate of absorber was 0.2, which was relatively low. This was supposed that recirculation capacity of absorbing liquid between froth zone and reaction zone of absorber be increased by oxidation air injection through liquid riser which acted as liquid pump. Test results showed that $SO_2$ removal efficiency was more sensitive than absorber ${\Delta}P$. High $SO_2$ removal even at lower pH resulted from very low concentration of $HSO_3^-$ ion in absorbing liquid because of direct supply of dissolved oxygen into froth zone. 96% of $SO_2$ removal efficiency was obtained under the condition of absorber pH 5.2, flue gas flow rate of $1,530\;Nm^3/hr$, inlet $SO_2$ concentration of 800 ppm, absorber ${\Delta}P$ of 250mmAq. The following equation by a multiple linear regression was obtained to describe the relationship between $SO_2$ removal and operating variables. $$f=1-{\exp}(-1.3939+1.060pH+0.0139{\Delta}P-0.00267G-0.000064SO_2Conc.),\;R^2=0.9719$$

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.254-259
• /
• 2007

The control of enzymic browning in potato slices by the use of citrate and phosphate buffer at different pH values and concentration was investigated. Minimally processed potatoes were stored at $5^{\circ}C$ and $20^{\circ}C$ followed by dipping in distilled water, citrate buffer (pH $3.0{\sim}5.0$) and phosphate buffer (pH $5.0{\sim}7.0$). The color characteristic was measured after storage at $5^{\circ}C$ and $20^{\circ}C$ for 24 hours. Treatment effectiveness was greatly improved by reducing pH and temperature. The citrate buffer was more effective than phosphate buffer in the browning inhibitory capacity. The citrate buffer (pH 3.0) showed the most anti-browning effect in this condition and more effective inhibition of browning by increasing concentration of treatment solution. The phosphate buffer (pH 5.0) treatment showed more effectiveness than concentration of 0.5 M of citrate buffer treatment.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.368-374
• /
• 2015

PURPOSE. The aim of the study was to evaluate the effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations. MATERIALS AND METHODS. Three different types of disk-shaped zirconia coping specimens (Lava, Cercon, Zirkonzahn: ${\phi}10mm{\times}0.4mm$) were fabricated and veneered with IPS e.max Press Ceram (shade A2), for total thicknesses of 1 and 1.5 mm. A total of sixty zirconia restoration specimens were divided into six groups based on their coping types and thicknesses. The abutment specimens (${\phi}10mm{\times}7mm$) were prepared with gold alloy, base metal (nickel-chromium) alloy, and four different shades (A1, A2, A3, A4) of composite resins. The average $L^*$, $a^*$, $b^*$ values of the zirconia specimens on the six abutment specimens were measured with a dental colorimeter, and the statistical significance in the effects of three variables was analyzed by using repeated measures analysis of variance (${\alpha}$=.05).The average shade difference (${\Delta}E$) values of the zirconia specimens between the A2 composite resin abutment and other abutments were also evaluated. RESULTS. The effects of zirconia specimen thickness (P<.001), abutment shade (P<.001), and type of zirconia copings (P<.003) on the final shade of the zirconia restorations were significant. The average ${\Delta}E$ value of Lava specimens (1 mm) between the A2 composite resin and gold alloy abutments was higher (close to the acceptability threshold of 5.5 ${\Delta}E$) than th ose between the A2 composite resin and other abutments. CONCLUSION. This in-vitro study demonstrated that abutment shade, ceramic thickness, and coping type affected the resulting shade of zirconia restorations.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.3
• /
• pp.45-64
• /
• 2010

Objectives : The purpose of this study was to examine the effects of auricular acupuncture at the Shinmun on patients with dementia by using power spectrum analysis. Electroencephalogram(EEG) power spectrum show site-specific and state-related differences in various frequency bands. Methods : Study was carried out in 38 subjects.(31 patients with dementia and 7 normal people, 27 females and 11 males ; mean age=75.9 years old). To know the effect of auricular acupuncture at the Shinmun in patients with dementia, we measured electroencephalogram(EEG) of normal people and patients with dementia about 'before', 'after' and 'after 15 minutes' giving auricular acupuncture at the Shinmun, and compared the brain wave($\alpha$, $\beta$, $\delta$, $\theta$) of EEG 30 channels. Results : In the case of patients with dementia, in the power values of $\alpha$(alpha) band at F4, FP2, FCZ, F8, FC4 channels (p<0.05) during the Shinmun-auricular acupuncture treatment increased significantly. In $\beta$(beta) band, the power values at T8 channel(p<0.05) during the Shinmun-auricular acupuncture treatment increased significantly. In $\delta$(delta) band, the power values at F7, FP1, FZ, FP2, FCZ, C4, FC4, CP4, T8, P7, P3, O1, OZ, O2, P4, P8 channels(p<0.05) during the Shinmun-auricular acupuncture treatment decreased significantly. In $\Theta$(theta) band, the power values at O1, OZ, O2channel(p<0.05) during the Shinmun-auricular acupuncture treatment decreased significantly. Conclusions : Through these results, we concluded that auricular acupuncture at the Shinmun on patients with dementia could have effect the functional mechanism of the cerebral cortex.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1355-1360
• /
• 2008

Effects of dietary ${\delta}$-aminolevulinic acid (ALA) supplementation on serum iron status, blood characteristics, egg production and quality were examined in laying hens in an 8-week feeding trail. Two hundred and forty (Hy-line brown, 40-week-old) layers were randomly assigned to four dietary treatments with ten replications (six layers in adjacent three cages). Dietary treatments included: 1) CON (basal diet), 2) ALA1 (CON+ALA 5 ppm), 3) ALA2 (CON+ALA 10 ppm) and 4) ALA3 (CON+ALA 15 ppm). All nutrient levels of diets were formulated to meet or exceed NRC (1994) recommendations for laying hens. During the entire experimental period, differences of serum iron concentration and total iron binding capacity (TIBC) were significantly increased in ALA1 supplemented treatment (quadratic effect, p<0.05). The difference of total protein between 8 and 0 weeks was significantly higher in ALA2 treatment than CON treatment (quadratic effect, p<0.05). No significant effects were observed on hemoglobin, WBC, RBC, lymphocyte and albumin concentrations. Egg production and egg weight were not influenced by the ALA supplementation. Egg yolk index was also significantly higher in ALA3 treatment than CON treatment at the end of 4 and 8 weeks (linear effect, p<0.05). Haugh unit was increased in ALA3 treatment compared to CON and ALA1 treatments at the end of 8 weeks (linear effect, p<0.05). However, egg shell thickness, breaking strength and yolk color unit were not affected by the ALA supplementation. In conclusion, dietary ALA supplementation at a level of 5 ppm can affect iron concentration in serum while higher levels (10 or 15 ppm) have some beneficial influences on blood profiles and egg quality.

• Geomechanics and Engineering
• /
• v.6 no.5
• /
• pp.419-436
• /
• 2014

Soil improvement by preloading with PVD in combination with vacuum is helpful when a considerable load is required to meet the desired rate of settlement in a relative short time. To facilitate the vacuum propagation, vertical drains are usually employed in conjunction. This ground improvement method is more and more applied in the Mekong delta of Vietnam to meet the needs of fast infrastructure development. This paper reports on a pilot test that was carried out to investigate the effect of ground improvement by vacuum and PVD on the rate of consolidation at the site of Saigon International Terminals Vietnam (SITV) in Ba Ria-Vung Tau Province, Viet Nam. Three main aspects of the test will be presented, and namely, instrumentation and field monitoring program, calculation of consolidation settlement and back-analysis of soil properties to see the difference before and after ground improvement.

• Journal of Photoscience
• /
• v.12 no.3
• /
• pp.113-117
• /
• 2005

Spectroscopic investigations on the interaction of gabapentin (GBP) with bovine serum albumin (BSA) were reported. The association constant of GBP-BSA system was determined at different temperatures (298, 302, 306 and 311 K) based on the fluorescence quenching results. The GBP was found to quench the fluorescence of BSA through static mechanism. Thermodynamic parameters, the standard enthalpy change, $({\Delta}H^o)$ and the standard entropy change $({\Delta}S^o)$ were observed to be $-9.61{\pm}0.008\;kJ\;mol^{-1}$ and $3.58{\pm}0.011\;Jmol^{-1}K{-1}$ respectively. These indicated that the hydrophobic and electrostatic forces played a role in the interaction of GBP with BSA. The negative value of ${\Delta}G^o$ revealed that the binding reaction is spontaneous. The circular dichroism studies indicated the conformational changes in BSA upon interaction with GBP. The effect of some metal ions on the binding constant was also investigated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.349-356
• /
• 2010

In this study, a new design method of pile bent structure considering plastic hinge was proposed on the basis of the beam-column model. Based on the analysis results, it is found that the positioning of plastic hinge on the pile bent structure was influenced by nonlinear behavior of material and p-$\Delta$ effect. Moreover, concrete cracking began to occur at the joint section between the pile and column in case of pile bent structure with different cross-sections. The plastic hinge can be developed on the pile bent structure when large displacement was occurred, and pile bent structures can be maintained well only if it is developed on the column part. Therefore, in this study, the optimized cross-section ratio between column and pile was analyzed to induce the plastic hinge at the joint section between the pile and column. Based on this, the optimized diameter ratio of pile and column can be obtained below the inflection point of the bi-linear curve depending on the relations between column-pile diameter ratio($D_c/D_p$) and normalized lateral cracking load ratio($F/F_{Dc=Dp}$). And through this study, it is founded that in-depth limit($L_{As}$=0.4%) normalized by the pile length($L_P$) are proportionally decreased as the pile length($L_P/D_P$) increases up to $L_P/D_P$=17.5, and beyond that in-depth limit converges to a constant value. Finally, it is found that the proposed limit depth by taking into account the minimum concrete-steel ratio would be more economical design of the pile bent structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.427-433
• /
• 2014

PURPOSE. Surface color is one of the main criteria to obtain an ideal esthetic. Many factors such as the type of the material, surface specifications, number of firings, firing temperature and thickness of the porcelain are all important to provide an unchanged surface color in dental ceramics. The aim of this study was to evaluate the color changes in dental ceramics according to the material type and glazing methods, during the multiple firings. MATERIALS AND METHODS. Three different types of dental ceramics (IPS Classical metal ceramic, Empress Esthetic and Empress 2 ceramics) were used in the study. Porcelains were evaluated under five main groups according to glaze and natural glaze methods. Color changes (${\Delta}E$) and changes in color parameters (${\Delta}L$, ${\Delta}a$, ${\Delta}b$) were determined using colorimeter during the control, the first, third, fifth, and seventh firings. The statistical analysis of the results was performed using ANOVA and Tukey test. RESULTS. The color changes which occurred upon material-method-firing interaction were statistically significant (P<.05). ${\Delta}E$, ${\Delta}L$, ${\Delta}a$ and ${\Delta}b$ values also demonstrated a negative trend. The MC-G group was less affected in terms of color changes compared to other groups. In all-ceramic specimens, the surface color was significantly affected by multiple firings. CONCLUSION. Firing detrimentally affected the structure of the porcelain surface and hence caused fading of the color and prominence of yellow and red characters. Compressible all-ceramics were remarkably affected by repeated firings due to their crystalline structure.