• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.192-193
• /
• 2006

In this paper, a co-axial type ozonizer varied with discharge gap was designed and manufactured for investigating (1) discharge characteristics with variation of output voltage power supply, flow rate and gap distance (2) ozone generation and solubility characteristics with variation of flow rate, gap distance and discharge power. Pure oxygen was used as process gas of the co-axial type ozonizer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.2
• /
• pp.230-237
• /
• 1996

The objective of the present study is to evaluate organic removal efficiencies, nitrogen removal efficiencies, kinetic constant, sludge production rates, oxygen requirements, and optimum treatment renditions for recycling water treatment of aquaculture by using a trickling filter process. When the loading rates were $0.500\~0.082kg\;COD/m^3/day$ and $0.271\~0.044kg\;NH_4^+-N/m^3/day$, SCOD and ammonia removal efficiencies were $74.5\~84.0\%$ and $43.7\~61.8\%$, respectively. The maximum removal rate of ammonia was 119.5 mg/L/day. Observed cell yield coefficient in the trickling filter reactor was 0.572 kg VSS/kg $BOD_{rem}$. When the hydraulic loading rate was $6.712\~40.341m^3/m^2/day$, oxygen uptake rate was $1.33\~7.22\;mg\;O_2/L/hr$.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.371-379
• /
• 2013

In order to improve the selective oxidation reaction of gaseous ammonia at a low temperature, various types of metal-impregnated activated alumina were prepared, and also physical and chemical properties of the conversion of ammonia were determined. Both types of metal (Cu, Ag) impregnated activated alumina show high conversion rate of ammonia at high temperature (over $300^{\circ}C$). However, at lower temperature ($200^{\circ}C$), Ag-impregnated catalyst shows the highest conversion rate (93%). In addition, the effects of lattice oxygen of the developed catalyst was studied. Ce-impregnated catalyst showed higher conversion rate than commercial alumina, but also showed lower conversion rate than Ag-impregnated sample. Moreover, 5 vol.% of Ag activation under hydrogen shows the highest conversion rate result. Finally, through high conversion at low temperature, it was considered that the production of NO and $NO_2$, toxic by-products, were effectively inhibited.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.1
• /
• pp.172-180
• /
• 2002

Polychlorinated biphenyls(PCBs) are large scale industrial chemicals which are using in diverse applications. The goal of this study was to determine if exposure to 2,2',5,5'-tetrachlorobiphenyl (PCB 52) leads to an increase in the production of active oxidants, and subsequently promotes apoptosis of neuronal SK-N-MC cells. Reactive oxygen species (ROS) formation was examined in SK-N-MC cells after treatment of PCB 52 by concentrations and incubation times, respectively. It showed that the rate of ROS production in the cells was increased in a does-dependent manner to 45 min, followed by a return towards control levels after 120 min treatment. We also examined the association of PCB-induced apoptosis with the modulation of biomakers of oxidative damage to lipids (malondialdehyde [MDA]) in SK-N-MC cells. Increased MDA was observed in a dose-dependent manner in groups treated with 10, 15, and 20 figJ me of PCB 52 for 24 h. After treatment of PCB 52, the cells did not show any significant change in the rate of Cu/Zn-superoxide dismutase (Cu/Zn-SOD) activity. Whereas, the cells had a two-fold greater rate of change in catalase activity at 20 ㎍/㎖ of PCB 52 for 24 h when compared to control group. Korean Ginseng is one of the most important crude drugs which has been used as a traditional Oriental medicine. We next investigated protective effect of extracts of ginseng on cytotoxicity induced by PCB 52 in SK-N-MC cells. Pretreatment of SK-N-MC cells with 25-200 μg/ml of ginseng were reduced cell death in a dose-dependent manner in PCB 52-treated cells. To examine the sensitivity of beta-catenin to ginseng, the protective effect of a range of ginseng concentrations was examined in SK-N-MC cells treated with PCB 52. The result demonstrated that ginseng efficiently blocked PCB 52 inducible beta-catenin proteolysis in a concentration dependent manner. The ROS formation was also measured in the presences of extract of ginseng and superoxide dismutase (inhibitor of oxygen free radical production). The both SOD (400 U/ml) and ginseng (200 μg/ml) significantly inhibited RDS generation in PCB 52-treated group.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.753-761
• /
• 2012

The reduction behavior of low level oxides such as (T.Fe), (MnO) and ($P_2O_5$) in molten EAF slag was investigated using commercial reductants. In an air atmosphere, the slag volume increased and the reduction rate of the slag was very low due to the oxidation loss of reductants by oxygen in the air. The reduction rate of the slag was also low when a commercial reductant was used alone in an Ar gas atmosphere. The reason is probably because the material transfer through the interface between the slag and reductant is difficult due to the formation of high melting point oxide. When reductants were mixed with burnt lime in order to form low melting point reaction products, the reduction rate of the slag increased up to the range of 45-70%. By using the mixtures of reductants and burnt lime so as to form a low melting point slag at the reaction end, the reduction rate of the slag was improved up to 60-85%.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2005

To find out temporal variations of net photosynthetic rate (NPR) of intertidal flats, we measured oxygen microprofiles in sediments with oxygen microsensors 4 times from December 2003 to June 2004. The study areas were the intertidial flats in Janghwa-ri and Dongmak-ri, located on the southwestern and the southern parts of Ganghwa-gun, respectively, and in Incheon North Harbor where the content of organic matter was relatively high. During the investigation, oxygen penetration depths in the tidal flats of Janghwa-ri and Dongmak-ri were high in December (mean values of 4.0-4.1 mm). Thereafter, the oxygen penetration depths declined to mean values of 2.2-2.8 mm and 1.6-1.8 mm in the two tidal flats. Interestingly, the oxygen penetration depths in the Incheon North Harbor tidal flat showed a lower range $(0.8{\pm}0.3\;mm;\;mean{\pm}1SD)$ over the period. The maximum NPR in the Dongmak-ri tidal flat was found in March $(11.1{\pm}2.8\;mmol\;O_2\;m^{-2}\;h^{-1})$, and those In Janghwa-ri $(6.1{\pm}4.1\;mmol\;O_2\;m^{-2}\;h^{-1})$ and Incheon North Harbor $(6.4{\pm}1.4\;mmol\;O_2\;m^{-2}\;h^{-1})$ were observed in May. During the period when NPR was most active, the highest oxygen concentration was found at 0.1-0.5 mm depth below the surface sediment, and was on average 1.8-3.2 times higher than the air-saturated oxygen concentration in the overlying seawater. Although we took into account of low in situ light intensity $(400{\mu}Einst\;m^{-2}\;s^{-1})$ during the investigation in June, NPR in the 3 study areas decreased significantly to less than $0.2\;mmol\;O_2\;m^{-2}\;h^{-1})$. Thus, temporal variations of NPR were somewhat different among the tidal flats. Generally, benthic primary producers inhabiting in the uppermost 0.5 mm of the sediment showed a peak photosynthetic activity in the study areas in spring. This is the first domestic report on photosynthetic rates of benthic microflora in the tidal flats with oxygen microsensors, and the use of the microsensor can be widely applied to measurements of benthic primary production of a tidal flat and the oxygen consumption rate of surficial sediments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.491-496
• /
• 1991

To maximize the production of aminoglycoside-3'-phosphotransferase of E. coli ATCC 21990 carrying R factor which encodes aminoglycoside-3'-phosphotransferase (APH(3')) phosphorylating the 3'-hydroxyl group of aminoglycoside, mutants M1 and M2, media composition and several factors affecting the enzyme production during fermentation were studied. Although the specific activity of APH(3') produced by a mutant M1 was increased as much as four times than that of E. coii ATCC 21990, the growth rate was decreased. The increase of the enzyme production was obtained by increased biomass during fermentation. A mutant M2 was obtained to increase the cell growth rate. Mutant M2 cells were cultivated with optimal media and pure oxygen gas in a fed-batch mode of fermentor operation. The specific activity of APH(3') was decreased, but total enzyme activity of APH(3') was increased as much as two point five times than that of mutant MI.

• Carbon letters
• /
• v.28
• /
• pp.31-37
• /
• 2018

This paper examines a simple one-step and catalyst-free method for synthesizing carbon nanoparticles from aliphatic alcohols and n-hexane with linear molecule formations by using a stable solution plasma process with a bipolar pulse and an external resistor. When the external resistor is adopted, it is observed that the current spikes are dramatically decreased, which induced production of a more stable discharge. Six aliphatic linear alcohols (methanol-hexanol) containing carbon with oxygen sources are studied as possible precursors for the massive production of carbon nanoparticles. Additional study is also carried out with the use of n-hexane containing many carbons without an oxygen source in order to enhance the formation of carbon nanoparticles and to eliminate unwanted oxygen effects. The obtained carbon nanoparticles are characterized with field emission-scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The results show that with increasing carbon ratios in alcohol content, the synthesis rate of carbon nanoparticles is increased, whereas the size of the carbon nanoparticles is decreased. Moreover, the degree of graphitization of the carbon nanoparticles synthesized from 1-hexanol and n-hexane with a high carbon (C)/oxygen (O) ratio and low or no oxygen is observed to be greater than that of the carbon nanoparticles synthesized from the corresponding materials with a low C/O ratio.

• Korean Journal of Exercise Nutrition
• /
• v.15 no.4
• /
• pp.163-171
• /
• 2011

The effects of a high-fat diet and fasting on resting energy expenditure and energy substrate utilization were examined using the method of measuring whole body energy metabolism and oxygen uptake. Eight 4-week old male Sprague-Dawley rats were used for the high-fat diet experiment. Energy metabolism was measured using acrylic metabolic chambers over 24 hours. After 1-week of preliminary feeding, 4 rats were fed a chow diet, whereas the remaining 4 rats were fed a high-fat diet (HF) ad libitum, which contained 40% (w/w, calorie base 60%) more fat than that in the chow diet. The flow rate to measure energy metabolism inside the chamber was controlled at a mean of 3.5 L/min, and five chambers were subjected to measurement. One of the five chambers was used to correct errors by measuring the atmosphere. As a result of 5 weeks of control diet and high-fat diet feeding, body weight of the high-fat diet group tended to increase more than that in the control diet fed group, but the difference was not significant. Oxygen uptake and carbon dioxide production changed as time went on over the 24 hr. The respiratory exchange ratio also changed during the 24 hr, and the difference between the groups was significant. The control group showed significantly more carbohydrate oxidation than that of the high-fat diet fed group. A fasting experiment was conducted using six 7-week old Sprague-Dawley male rats. Energy metabolism measurements were performed using the same method as that used in the high-fat diet experiment; resting metabolism was measured prior to fasting, and a fasting condition began from 9:00 am the next day for 3 days to calculate energy metabolism. Both body weight and 24-hour oxygen uptake decreased significantly as a result of 3-day fasting. Total oxygen uptake in the first day decreased, and declined significantly on day 3 of fasting. Total 24-hour carbon dioxide production decreased significantly over the 3 days. The mean 24-hour respiratory exchange ratio decreased significantly. Additionally, energy expenditure during the dark period (20:00-08:00), which is the active period for rats, decreased significantly with fasting, whereas energy expenditure during the light period (08:00-20:00) did not increase by fasting.