• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.104-109
• /
• 2007

The amount of nitrate in the tobacco leaf has been shown to be correlated with the levels of alkaloids and nitrosamines. Also the nitrate content of the tobacco correlated closely with the smoke delivery of nitric oxide and tobacco-specific nitrosamines (TSNAs). These are related with the effect of the reconstituted tobacco leaf(Recon) using the tobacco stems. Adsorption process is gaining interest as one of the effective processes of advanced liquid treatment for liquid containing unnecessary materials. This study is focused on the evaluation of four anion exchangers, a cation exchanger and an activated carbon, as adsorbents for reduction of nitrate anion from Recon extract. In order to analyze the nitrate anion, the IC method used in this work was carried out with a Dionex ICS-2000 system. The effects of dosages of adsorbents and concentration of extract on the removal of nitrate anion were examined. Experimental results showed that for nitrate-anion exchanger, nitrate-cation exchanger and nitrate-activated carbon adsorption system, approximately 70 %, 10 %, and 4 % removal efficiencies were achieved at the Brix 10 and the 20 % addition. Although the activated carbon was little efficient for removal of nitrate ion, the removal of nicotine was very efficient at given conditions.

• Korean Journal of Materials Research
• /
• v.25 no.11
• /
• pp.622-629
• /
• 2015

Cu circuits were successfully fabricated on flexible PET(polyethylene terephthalate) substrates using wettability difference and electroless plating without an etching process. The wettability of Cu plating solution on PET was controlled by oxygen plasma treatment and $SiO_x$-DLC(silicon oxide containing diamond like carbon) coating by HMDSO(hexamethyldisiloxane) plasma. With an increase of the height of the nanostructures on the PET surface with the oxygen plasma treatment time, the wettability difference between the hydrophilicity and hydrophobicity increased, which allowed the etchless formation of a Cu pattern with high peel strength by selective Cu plating. When the height of the nanostructure was more than 1400 nm (60 min oxygen plasma treatment), the reduction of the critical impalement pressure with the decreasing density of the nanostructure caused the precipitation of copper in the hydrophobic region.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.90.2-90.2
• /
• 2012

Graphene has recently attracted significant attention because of its unique optical and electrical properties. For practical device applications, special attention has to be paid to the synthesis of high-quality graphene on large-area substrates. Graphene has been synthesized by eloborated mechanical exfoliation of highly oriented pyrolytic graphite, chemical reduction of exfoliated grahene oxide, thermal decomposition of silicon carbide, and chemical vapor deposition (CVD) on Ni or Cu substrates. Among these techniques, CVD is superior to the others from the perspective of technological applications because of its possibility to produce a large size graphene. PECVD has been demonstrated to be successful in synthesizing various carbon nanostructures, such as carbon nanotubes and nanosheets. Compared with thermal CVD, PECVD possesses a unique advantage of additional high-density reactive gas atoms and radicals, facilitating low-temperature, rapid, and controllable synthesis. In the current study, we report results in synthesizing of high-quality graphene films on a Ni films at low temperature. Controllable synthesis of quality graphene on Cu foil through inductively-coupled plasma CVD (ICPCVD), in which the surface chemistry is significantly different from that of conventional thermal CVD, was also discussed.

• Journal of Powder Materials
• /
• v.14 no.5
• /
• pp.292-297
• /
• 2007

The present study was focused on the synthesis of a $TiB_2$ dispersed copper matrix composite material by the combination of the mechanical milling and plasma activated sintering processes. The $Cu/TiB_2$ mixed powder was prepared by the combination of the mechanical milling and reduction processes using the copper oxide and titanium diboride powder as the raw material. The synthesized $Cu/TiB_2$ mixed powder was sintered by the plasma activated sintering process. The hardness and electric conductivity of the sintered bodies were measured using micro vickers hardness and four probe method, respectively. The relative density of $Cu/TiB_2$ composite material sintered at $800^{\circ}C$ showed about 98% of theoretical density. The $Cu-1vol%TiB_2$ composite material has a hardness of about 130Hv and an electric conductivity of about 85% IACS. The hardness and electric conductivity of $Cu-3vol%TiB_2$ composite material were about 140 Hv and about 45% IACS, respectively.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.122-127
• /
• 2017

Fe-6.5 wt.% Si alloys are widely known to have excellent soft magnetic properties such as high magnetic flux density, low coercivity, and low core loss at high frequency. In this work, disc-shaped preforms are prepared by spark plasma sintering at 1223 K after inert gas atomization of Fe-6.5 wt.% Si powders. Fe-6.5 wt.% Si sheets are rolled by a powder hot-rolling process without cracking, and their microstructure and soft magnetic properties are investigated. The microstructure and magnetic properties (saturation magnetization and core loss) of the hot-rolled Fe-6.5 wt.% Si sheets are examined by scanning electron microscopy, electron backscatter diffraction, vibration sample magnetometry, and AC B-H analysis. The Fe-6.5 wt.% Si sheet rolled at a total reduction ratio of 80% exhibits good soft magnetic properties such as a saturation magnetization of 1.74 T and core loss ($W_{5/1000}$) of 30.7 W/kg. This result is caused by an increase in the electrical resistivity resulting from an increased particle boundary density and the oxide layers between the primary particle boundaries.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.407-412
• /
• 2007

For $VO_{2}$ sensors applicable to temperature measurement by using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were investigated systematically as a function of the annealing condition. The starting materials, vanadium pentoxide ($V_{2}O_{5}$) powders, were mixed with vehicle to form paste. This paste was screen-printed on $Al_{2}O_{3}$ substrates and then $VO_{2}$ thick films were heat-treated at $450^{\circ}C$ to $600^{\circ}C$, respectively, for 1 hr in $N_{2}$ gas atmosphere for the reduction. As results of the temperature vs. resistance property measurements, the electrical resistance of the $V_{2}O_{5}$ sensor in phase transition range was decreased by $10^{3.9}$ order. The presented critical temperature sensor could be used in fire-protection and control systems.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.503-507
• /
• 2005

Microstructure and wear behavior of A1203-based nanocomposites with Cu and Ni-Co dispersions were investigated. $Al_2O_3/Cu$ and $Al_2O_3/Ni-Co$ nanocomposites were fabricated by hydrogen reduction and sintering method using metal oxide and metal nitrates. The nanocomposites showed increased mechanical properties compared with monolithic $Al_2O_3$. In particular, high toughness and hardness were measured for the $Al_2O_3/Ni-Co$ nanocomposite consolidated by spark plasma sintering. A minimum value of wear coefficient comparable to the monolithic $Al_2O_3$ was obtained for $Al_2O_3/Ni-Co$ nanocomposite. Wear behavior is discussed in terms of microstructure and mechanical properties of nanocomposites

• Journal of the Korean institute of surface engineering
• /
• v.28 no.1
• /
• pp.34-45
• /
• 1995

An amphiphilic nitroxide radical(2,2'6,6'-tetramethyl-4-octadecyioxy-1-piperidinyloxyl, TEMOPO) or mixture of TEMOPO and arachidic acid(Icosanoic acid, AA), was spread on water surface by the Langmuir-Blodgett(LB) method and surface pressure-area curve was measured. Such monolayer films of TEMOPO were transferred onto surfaces of photo transferable tin oxide electrodes(PTTO) by the LB method under various surface pressure with the transfer ratio of larger than 0.95 at the surface pressure higher than 15mN/m. The electrochemical effect of functional nitroxy radical monolayer onto semi-conductive electrode to electrolyte have been investigated by using LB method. Cyclic voltammetry technique was used for the electrochemical behavior measurement of TEMOPO monolayer onto the PTTO in 0.18 mo1/$dm^3$ $H_2SO_4$ solutions. The shape of voltammograms was found to change from one electrode to another. The amount of charge for the oxidation and the re-reduction of the cation to TEMOPO were evaluated from graphical integration. The amounts of charge were always smaller than those predicted from the $\pi$-$\sigma$ curves though the transfer ratio was unity. The poor reproducibility of the cyclic voltammograms was improved by the mixing with AA. Structure and arrangement of monomolecular layer on water surface and electrode were studied. Characteristics of monolayer film applied for the mediation reaction was also discussed by electrochemical method.

• The Journal of Korean Medicine
• /
• v.26 no.1 s.61
• /
• pp.18-25
• /
• 2005

Objective & Methods: We examined the effects of Platycodi radix on the process of lipopolysaccharide (LPS)-induced nuclear factor $NF-{\kappa}Bp65$ and inhibitory $(I)-{\kappa}B{\alpha}$ alteration in RAW 264.7 cells and acute lung injury in rats. Results: Immunoblot analysis showed that LPS-induced degradation of $I-{\kappa}B{\alpha}$ in RAW 264.7 was inhibited by pretreatment of Platycodi radix. The total cells of bronchoalveolar lavage fluid by LPS challenge markedly decreased in the Platycodi radix pretreatment rats. Platycodi radix pretreatment also caused a decline in neutrophils infiltration into interstitium of the lung. In the alveolar macrophages and neutrophils, decreased $NF-{\kappa}Bp65$ and inducible nitric oxide synthase and increased $I-{\kappa}B{\alpha}$ immunoreaction were detected in Platycodi radix pretreated rats compared with LPS alone treated ones. Conclusion : It may be concluded that Platycodi radix attenuates the development of LPS-induced inflammation by reduction of $NF-{\kappa}Bp65$ activation and neutrophil-mediated acute lung injury. Platycodi radix would be useful as a therapeutic agent for endotoxin-induced lung disease.

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1187-1193
• /
• 2012

The aim of this research is to enhance the bottom environment of Geoje fish farm that has been severely contaminated. Treatment of microbial agent and/or calcium oxide significantly changed that environment: in ignition loss, either treatment (25% or 21%) showed better than mixed treatment (13.2%). In COD, the oxygen releasing agent or mixed treatment reduced the index by more than 20%. In T-P and T-N, the effects of $CaO_2$ on them were overwhelming (50% or more) meanwhile that of the microbial agent on them was less than 20%. Also, $CaO_2$ influenced on the microbial flora: Desulfobvibrio thermophilus, a sulfate reducing bacterium decreased in number, considering the increase of pH and rise of redox potential. In contrast, Pseudomonas sp., Pseudoalteromonas sp., Pseudomonas aeruginosa were remarkably dominant over other species with mixed treatment as a PCA analysis confirmed it.